Trade prices for dealers.

0

Leed Brakes Proportioning Valve Kit - Disc/Drum Brass

Part # PV2BPT

Features

  • Manufactured to OE specifications

Description

Add safety to your brake system with this front disc/ rear drum brass proportioning valve kit. When upgrading to a dual bowl master cylinder is it always wise to add a proportioning brake valve equipped with a safety switch. The safety switch built into this proportioning brake valve senses when your brake system is producing unequal or lower pressure to one or more of the wheels, usually caused by a component failure. When the proportioning brake valve senses this drop or change in pressure it will cut off the pressure to the port supplying fluid to the defective brakes, thus stopping the leak. At this point you have noticed a change in your pedal feel, your brakes stopping ability and possibly the warning light on your dashboard. You will now be able to safely pull the vehicle off the road without causing harm to you or your vehicle. Without this proportioning valve kit installed, if a component fails on your vehicle your brake pedal will drop to the floor as you pump the pedal with little to no braking. Brakes are the most important component on your vehicle, do it right the first time, be safe.

Specifications

Adjustment TypeFixed
ColorBrass
Grade TypePerformance
Inlet AttachmentFront - 1/2-20, Rear 7/16-24
Inlet Port Inside Diameter1/2-20, 7/16-24 in
Inlet Port Quantity2
Inlet Quantity2
Length5.400 in
MaterialBrass
Maximum Height1.900 in
Maximum Width1.125 in
Mounting Bracket IncludedNo
Mounting Hole Quantity2
Outlet Port Inside Diameter3/8-24, 9/16-18 in
Outlet Port Quantity3
Outlet Quantity3
StatusExisting
Terminal Quantity1
Terminal TypePin
TLELEED Brakes Proportioning Valve Kit - Disc/Drum Brass
UPC / GTIN00887753637093
WarrantyLimited Warranty, See PDF
C$142.99