Trade prices for dealers.

0

Patriot Exhaust Mid Silver Vette for Chevrolet

Part # H8025-1

Description

Patriot Mid Length Header 55-57 Chevrolet 55-82 Vette 265-400 SBC 1 5/8" Primary 2 1/2" Collector Silver Ceramic Coated H8025-1

Specifications

Collector Attachment3-Bolt Flange
Collector Port Diameter2.5 in
DesignMid-Length
EGT PortNo
EmissionFullDES2 - This product is Legal for use on Pre-Pollution Controlled Vehicles. It is legal for use on all vehicles produced Before Emissions Control Regulations were imposed. These are considered Uncontrolled Vehicles and are defined as follows; 1965 and Older US Manufactured California Certified Vehicles, 1967 and Older US Manufactured Federally Certified Vehicles, 1967 and Older Foreign Manufactured Vehicles
FinishCeramic Coated
Gasket Or Seal IncludedYes
Grade TypePerformance
MaterialSteel
Mounting Hardware IncludedYes
Oxygen Sensor PortNo
Port ShapeRound
Primary Tubing Diameter1.625 in
Sheen LevelSemi-Gloss
Tube Wall Thickness16 ga.
UPC / GTIN00694342504410

Fits these vehicles

YearMakeModelEngineNote
1955 - 1956ChevroletBel Air4.3L V8Does not fit angle plug heads; Fits with stock or 605 steering boxes, aftermarket side engine mounts and rear trans cross member; Check motor mount position before ordering; Will not fit if engine is located more than 3/4” forward for HEI firewall clearance. Fits with Trans Dapt PN 4195 or 4177, Danchuck PN 871, 12184, 17756, 17757, & 16339 or equivalent; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans; Installation requires left side A/C bracket part number H7608. 1979 and later vehicles with short compressors can use the stock bracket.; Original bellhousing frame mounts must be removed.; Header is designed to fit cars using original V-8 pitman arm part number 3719487 not 6 cylinder pitman arm number 3709877. Aftermarket pitman arms must be same configuration as OE for proper header fit.
1957ChevroletBel Air4.3L V8, 4.6L V8Does not fit angle plug heads; Fits with stock or 605 steering boxes, aftermarket side engine mounts and rear trans cross member; Check motor mount position before ordering; Will not fit if engine is located more than 3/4” forward for HEI firewall clearance. Fits with Trans Dapt PN 4195 or 4177, Danchuck PN 871, 12184, 17756, 17757, & 16339 or equivalent; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans; Installation requires left side A/C bracket part number H7608. 1979 and later vehicles with short compressors can use the stock bracket.; Original bellhousing frame mounts must be removed.; Header is designed to fit cars using original V-8 pitman arm part number 3719487 not 6 cylinder pitman arm number 3709877. Aftermarket pitman arms must be same configuration as OE for proper header fit.
1955 - 1956ChevroletCorvette4.3L V8Does not fit angle plug heads; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans; Installation requires left side A/C bracket part number H7608. 1979 and later vehicles with short compressors can use the stock bracket.
1957 - 1961ChevroletCorvette4.6L V8Does not fit angle plug heads; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans; Installation requires left side A/C bracket part number H7608. 1979 and later vehicles with short compressors can use the stock bracket.
1962 - 1967ChevroletCorvette5.3L V8Does not fit angle plug heads; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans; Installation requires left side A/C bracket part number H7608. 1979 and later vehicles with short compressors can use the stock bracket.
1968ChevroletCorvette5.3L V8, 5.4L V8Does not fit angle plug heads; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans; Installation requires left side A/C bracket part number H7608. 1979 and later vehicles with short compressors can use the stock bracket.
1969 - 1979ChevroletCorvette5.7L V8Does not fit angle plug heads; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans; Installation requires left side A/C bracket part number H7608. 1979 and later vehicles with short compressors can use the stock bracket.
1980ChevroletCorvette5.0L V8, 5.7L V8Does not fit angle plug heads; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans; Installation requires left side A/C bracket part number H7608. 1979 and later vehicles with short compressors can use the stock bracket.
1981 - 1982ChevroletCorvette5.7L V8Does not fit angle plug heads; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans; Installation requires left side A/C bracket part number H7608. 1979 and later vehicles with short compressors can use the stock bracket.
1955 - 1956ChevroletOne-Fifty Series4.3L V8Does not fit angle plug heads; Fits with stock or 605 steering boxes, aftermarket side engine mounts and rear trans cross member; Check motor mount position before ordering; Will not fit if engine is located more than 3/4” forward for HEI firewall clearance. Fits with Trans Dapt PN 4195 or 4177, Danchuck PN 871, 12184, 17756, 17757, & 16339 or equivalent; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans; Installation requires left side A/C bracket part number H7608. 1979 and later vehicles with short compressors can use the stock bracket.; Original bellhousing frame mounts must be removed.; Header is designed to fit cars using original V-8 pitman arm part number 3719487 not 6 cylinder pitman arm number 3709877. Aftermarket pitman arms must be same configuration as OE for proper header fit.
1957ChevroletOne-Fifty Series4.3L V8, 4.6L V8Does not fit angle plug heads; Fits with stock or 605 steering boxes, aftermarket side engine mounts and rear trans cross member; Check motor mount position before ordering; Will not fit if engine is located more than 3/4” forward for HEI firewall clearance. Fits with Trans Dapt PN 4195 or 4177, Danchuck PN 871, 12184, 17756, 17757, & 16339 or equivalent; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans; Installation requires left side A/C bracket part number H7608. 1979 and later vehicles with short compressors can use the stock bracket.; Original bellhousing frame mounts must be removed.; Header is designed to fit cars using original V-8 pitman arm part number 3719487 not 6 cylinder pitman arm number 3709877. Aftermarket pitman arms must be same configuration as OE for proper header fit.
1955 - 1956ChevroletSedan Delivery4.3L V8Does not fit angle plug heads; Fits with stock or 605 steering boxes, aftermarket side engine mounts and rear trans cross member; Check motor mount position before ordering; Will not fit if engine is located more than 3/4” forward for HEI firewall clearance. Fits with Trans Dapt PN 4195 or 4177, Danchuck PN 871, 12184, 17756, 17757, & 16339 or equivalent; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans; Installation requires left side A/C bracket part number H7608. 1979 and later vehicles with short compressors can use the stock bracket.; Original bellhousing frame mounts must be removed.; Header is designed to fit cars using original V-8 pitman arm part number 3719487 not 6 cylinder pitman arm number 3709877. Aftermarket pitman arms must be same configuration as OE for proper header fit.
1957ChevroletSedan Delivery4.3L V8, 4.6L V8Does not fit angle plug heads; Fits with stock or 605 steering boxes, aftermarket side engine mounts and rear trans cross member; Check motor mount position before ordering; Will not fit if engine is located more than 3/4” forward for HEI firewall clearance. Fits with Trans Dapt PN 4195 or 4177, Danchuck PN 871, 12184, 17756, 17757, & 16339 or equivalent; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans; Installation requires left side A/C bracket part number H7608. 1979 and later vehicles with short compressors can use the stock bracket.; Original bellhousing frame mounts must be removed.; Header is designed to fit cars using original V-8 pitman arm part number 3719487 not 6 cylinder pitman arm number 3709877. Aftermarket pitman arms must be same configuration as OE for proper header fit.
1955 - 1956ChevroletTwo-Ten Series4.3L V8Does not fit angle plug heads; Fits with stock or 605 steering boxes, aftermarket side engine mounts and rear trans cross member; Check motor mount position before ordering; Will not fit if engine is located more than 3/4” forward for HEI firewall clearance. Fits with Trans Dapt PN 4195 or 4177, Danchuck PN 871, 12184, 17756, 17757, & 16339 or equivalent; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans; Installation requires left side A/C bracket part number H7608. 1979 and later vehicles with short compressors can use the stock bracket.; Original bellhousing frame mounts must be removed.; Header is designed to fit cars using original V-8 pitman arm part number 3719487 not 6 cylinder pitman arm number 3709877. Aftermarket pitman arms must be same configuration as OE for proper header fit.
1957ChevroletTwo-Ten Series4.3L V8, 4.6L V8Does not fit angle plug heads; Fits with stock or 605 steering boxes, aftermarket side engine mounts and rear trans cross member; Check motor mount position before ordering; Will not fit if engine is located more than 3/4” forward for HEI firewall clearance. Fits with Trans Dapt PN 4195 or 4177, Danchuck PN 871, 12184, 17756, 17757, & 16339 or equivalent; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans; Installation requires left side A/C bracket part number H7608. 1979 and later vehicles with short compressors can use the stock bracket.; Original bellhousing frame mounts must be removed.; Header is designed to fit cars using original V-8 pitman arm part number 3719487 not 6 cylinder pitman arm number 3709877. Aftermarket pitman arms must be same configuration as OE for proper header fit.
C$873.99