Patriot Exhaust Mid Length Black Coated for Chevrolet
Part # H8063
Description
Patriot Mid Length Header 55-57 Chevrolet 265-400 SBC 1 5/8" Primary 3" Collector Hi Temp Black Coated H8063
Specifications
| Collector Attachment | 3-Bolt Flange |
|---|---|
| Collector Port Diameter | 3 in |
| Color | Black |
| Design | Mid-Length |
| EGT Port | No |
| EmissionFullDES | 2 - This product is Legal for use on Pre-Pollution Controlled Vehicles. It is legal for use on all vehicles produced Before Emissions Control Regulations were imposed. These are considered Uncontrolled Vehicles and are defined as follows; 1965 and Older US Manufactured California Certified Vehicles, 1967 and Older US Manufactured Federally Certified Vehicles, 1967 and Older Foreign Manufactured Vehicles |
| Finish | Painted |
| Gasket Or Seal Included | Yes |
| Grade Type | Performance |
| Material | Steel |
| Mounting Hardware Included | Yes |
| Oxygen Sensor Port | No |
| Port Shape | Round |
| Primary Tubing Diameter | 1.625 in |
| Sheen Level | Matte |
| Tube Wall Thickness | 18 ga. |
| UPC / GTIN | 00694342521349 |
| Year | Make | Model | Engine | Note |
|---|---|---|---|---|
| 1955 - 1956 | Chevrolet | Bel Air | 4.3L V8 | Does not fit angle plug heads; Check motor mount position before ordering; Will not fit if engine is located more than 3/4” forward for HEI firewall clearance. Fits with Trans Dapt PN 4195 or 4177, Danchuck PN 871, 12184, 17756, 17757, & 16339 or equivalent; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans; Original bellhousing frame mounts must be removed.; Designed to fit with Maval/Unisteer rack and pinion or similar steering systems; Will not fit manual transmission cars with factory Z bar clutch linkage |
| 1957 | Chevrolet | Bel Air | 4.3L V8, 4.6L V8 | Does not fit angle plug heads; Check motor mount position before ordering; Will not fit if engine is located more than 3/4” forward for HEI firewall clearance. Fits with Trans Dapt PN 4195 or 4177, Danchuck PN 871, 12184, 17756, 17757, & 16339 or equivalent; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans; Original bellhousing frame mounts must be removed.; Designed to fit with Maval/Unisteer rack and pinion or similar steering systems; Will not fit manual transmission cars with factory Z bar clutch linkage |
| 1955 - 1956 | Chevrolet | One-Fifty Series | 4.3L V8 | Does not fit angle plug heads; Check motor mount position before ordering; Will not fit if engine is located more than 3/4” forward for HEI firewall clearance. Fits with Trans Dapt PN 4195 or 4177, Danchuck PN 871, 12184, 17756, 17757, & 16339 or equivalent; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans; Original bellhousing frame mounts must be removed.; Designed to fit with Maval/Unisteer rack and pinion or similar steering systems; Will not fit manual transmission cars with factory Z bar clutch linkage |
| 1957 | Chevrolet | One-Fifty Series | 4.3L V8, 4.6L V8 | Does not fit angle plug heads; Check motor mount position before ordering; Will not fit if engine is located more than 3/4” forward for HEI firewall clearance. Fits with Trans Dapt PN 4195 or 4177, Danchuck PN 871, 12184, 17756, 17757, & 16339 or equivalent; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans; Original bellhousing frame mounts must be removed.; Designed to fit with Maval/Unisteer rack and pinion or similar steering systems; Will not fit manual transmission cars with factory Z bar clutch linkage |
| 1955 - 1956 | Chevrolet | Sedan Delivery | 4.3L V8 | Does not fit angle plug heads; Check motor mount position before ordering; Will not fit if engine is located more than 3/4” forward for HEI firewall clearance. Fits with Trans Dapt PN 4195 or 4177, Danchuck PN 871, 12184, 17756, 17757, & 16339 or equivalent; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans; Original bellhousing frame mounts must be removed.; Designed to fit with Maval/Unisteer rack and pinion or similar steering systems; Will not fit manual transmission cars with factory Z bar clutch linkage |
| 1957 | Chevrolet | Sedan Delivery | 4.3L V8, 4.6L V8 | Does not fit angle plug heads; Check motor mount position before ordering; Will not fit if engine is located more than 3/4” forward for HEI firewall clearance. Fits with Trans Dapt PN 4195 or 4177, Danchuck PN 871, 12184, 17756, 17757, & 16339 or equivalent; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans; Original bellhousing frame mounts must be removed.; Designed to fit with Maval/Unisteer rack and pinion or similar steering systems; Will not fit manual transmission cars with factory Z bar clutch linkage |
| 1955 - 1956 | Chevrolet | Two-Ten Series | 4.3L V8 | Does not fit angle plug heads; Check motor mount position before ordering; Will not fit if engine is located more than 3/4” forward for HEI firewall clearance. Fits with Trans Dapt PN 4195 or 4177, Danchuck PN 871, 12184, 17756, 17757, & 16339 or equivalent; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans; Original bellhousing frame mounts must be removed.; Designed to fit with Maval/Unisteer rack and pinion or similar steering systems; Will not fit manual transmission cars with factory Z bar clutch linkage |
| 1957 | Chevrolet | Two-Ten Series | 4.3L V8, 4.6L V8 | Does not fit angle plug heads; Check motor mount position before ordering; Will not fit if engine is located more than 3/4” forward for HEI firewall clearance. Fits with Trans Dapt PN 4195 or 4177, Danchuck PN 871, 12184, 17756, 17757, & 16339 or equivalent; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans; Original bellhousing frame mounts must be removed.; Designed to fit with Maval/Unisteer rack and pinion or similar steering systems; Will not fit manual transmission cars with factory Z bar clutch linkage |