Patriot Exhaust Mid Black Vette for Chevrolet
Part # H8025-B
Description
Patriot Mid Length Header 55-57 Chevrolet 55-82 Vette 265-400 SBC 1 5/8" Primary 2 1/2" Collector Hi Temp Black Coated H8025-B
Specifications
| Collector Attachment | 3-Bolt Flange |
|---|---|
| Collector Port Diameter | 2.5 in |
| Color | Black |
| Design | Mid-Length |
| EGT Port | No |
| EmissionFullDES | 2 - This product is Legal for use on Pre-Pollution Controlled Vehicles. It is legal for use on all vehicles produced Before Emissions Control Regulations were imposed. These are considered Uncontrolled Vehicles and are defined as follows; 1965 and Older US Manufactured California Certified Vehicles, 1967 and Older US Manufactured Federally Certified Vehicles, 1967 and Older Foreign Manufactured Vehicles |
| Finish | Painted |
| Gasket Or Seal Included | Yes |
| Grade Type | Performance |
| Material | Steel |
| Mounting Hardware Included | Yes |
| Oxygen Sensor Port | No |
| Port Shape | Round |
| Primary Tubing Diameter | 1.625 in |
| Sheen Level | Satin |
| Tube Wall Thickness | 16 ga. |
| UPC / GTIN | 00694342544294 |
| Year | Make | Model | Engine | Note |
|---|---|---|---|---|
| 1955 - 1956 | Chevrolet | Bel Air | 4.3L V8 | Check motor mount position before ordering; Does not fit angle plug heads; Fits with stock or 605 steering boxes, aftermarket side engine mounts and rear trans cross member; Header is designed to fit cars using original V-8 pitman arm part number 3719487 not 6 cylinder pitman arm number 3709877. Aftermarket pitman arms must be same configuration as OE for proper header fit.; Installation requires left side A/C bracket part number H7608. 1979 and later vehicles with short compressors can use the stock bracket.; Mid-Length; Original bellhousing frame mounts must be removed.; Will not fit if engine is located more than 3/4” forward for HEI firewall clearance. Fits with Trans Dapt PN 4195 or 4177, Danchuck PN 871, 12184, 17756, 17757, & 16339 or equivalent; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans |
| 1957 | Chevrolet | Bel Air | 4.3L V8, 4.6L V8 | Check motor mount position before ordering; Does not fit angle plug heads; Fits with stock or 605 steering boxes, aftermarket side engine mounts and rear trans cross member; Header is designed to fit cars using original V-8 pitman arm part number 3719487 not 6 cylinder pitman arm number 3709877. Aftermarket pitman arms must be same configuration as OE for proper header fit.; Installation requires left side A/C bracket part number H7608. 1979 and later vehicles with short compressors can use the stock bracket.; Mid-Length; Original bellhousing frame mounts must be removed.; Will not fit if engine is located more than 3/4” forward for HEI firewall clearance. Fits with Trans Dapt PN 4195 or 4177, Danchuck PN 871, 12184, 17756, 17757, & 16339 or equivalent; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans |
| 1955 - 1956 | Chevrolet | Corvette | 4.3L V8 | Does not fit angle plug heads; Installation requires left side A/C bracket part number H7608. 1979 and later vehicles with short compressors can use the stock bracket.; Mid-Length; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans |
| 1957 - 1961 | Chevrolet | Corvette | 4.6L V8 | Does not fit angle plug heads; Installation requires left side A/C bracket part number H7608. 1979 and later vehicles with short compressors can use the stock bracket.; Mid-Length; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans |
| 1962 - 1967 | Chevrolet | Corvette | 5.3L V8 | Does not fit angle plug heads; Installation requires left side A/C bracket part number H7608. 1979 and later vehicles with short compressors can use the stock bracket.; Mid-Length; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans |
| 1968 | Chevrolet | Corvette | 5.3L V8, 5.4L V8 | Does not fit angle plug heads; Installation requires left side A/C bracket part number H7608. 1979 and later vehicles with short compressors can use the stock bracket.; Mid-Length; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans |
| 1969 - 1979 | Chevrolet | Corvette | 5.7L V8 | Does not fit angle plug heads; Installation requires left side A/C bracket part number H7608. 1979 and later vehicles with short compressors can use the stock bracket.; Mid-Length; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans |
| 1980 | Chevrolet | Corvette | 5.0L V8, 5.7L V8 | Does not fit angle plug heads; Installation requires left side A/C bracket part number H7608. 1979 and later vehicles with short compressors can use the stock bracket.; Mid-Length; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans |
| 1981 - 1982 | Chevrolet | Corvette | 5.7L V8 | Does not fit angle plug heads; Installation requires left side A/C bracket part number H7608. 1979 and later vehicles with short compressors can use the stock bracket.; Mid-Length; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans |
| 1955 - 1956 | Chevrolet | One-Fifty Series | 4.3L V8 | Check motor mount position before ordering; Does not fit angle plug heads; Fits with stock or 605 steering boxes, aftermarket side engine mounts and rear trans cross member; Header is designed to fit cars using original V-8 pitman arm part number 3719487 not 6 cylinder pitman arm number 3709877. Aftermarket pitman arms must be same configuration as OE for proper header fit.; Installation requires left side A/C bracket part number H7608. 1979 and later vehicles with short compressors can use the stock bracket.; Mid-Length; Original bellhousing frame mounts must be removed.; Will not fit if engine is located more than 3/4” forward for HEI firewall clearance. Fits with Trans Dapt PN 4195 or 4177, Danchuck PN 871, 12184, 17756, 17757, & 16339 or equivalent; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans |
| 1957 | Chevrolet | One-Fifty Series | 4.3L V8, 4.6L V8 | Check motor mount position before ordering; Does not fit angle plug heads; Fits with stock or 605 steering boxes, aftermarket side engine mounts and rear trans cross member; Header is designed to fit cars using original V-8 pitman arm part number 3719487 not 6 cylinder pitman arm number 3709877. Aftermarket pitman arms must be same configuration as OE for proper header fit.; Installation requires left side A/C bracket part number H7608. 1979 and later vehicles with short compressors can use the stock bracket.; Mid-Length; Original bellhousing frame mounts must be removed.; Will not fit if engine is located more than 3/4” forward for HEI firewall clearance. Fits with Trans Dapt PN 4195 or 4177, Danchuck PN 871, 12184, 17756, 17757, & 16339 or equivalent; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans |
| 1955 - 1956 | Chevrolet | Sedan Delivery | 4.3L V8 | Check motor mount position before ordering; Does not fit angle plug heads; Fits with stock or 605 steering boxes, aftermarket side engine mounts and rear trans cross member; Header is designed to fit cars using original V-8 pitman arm part number 3719487 not 6 cylinder pitman arm number 3709877. Aftermarket pitman arms must be same configuration as OE for proper header fit.; Installation requires left side A/C bracket part number H7608. 1979 and later vehicles with short compressors can use the stock bracket.; Mid-Length; Original bellhousing frame mounts must be removed.; Will not fit if engine is located more than 3/4” forward for HEI firewall clearance. Fits with Trans Dapt PN 4195 or 4177, Danchuck PN 871, 12184, 17756, 17757, & 16339 or equivalent; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans |
| 1957 | Chevrolet | Sedan Delivery | 4.3L V8, 4.6L V8 | Check motor mount position before ordering; Does not fit angle plug heads; Fits with stock or 605 steering boxes, aftermarket side engine mounts and rear trans cross member; Header is designed to fit cars using original V-8 pitman arm part number 3719487 not 6 cylinder pitman arm number 3709877. Aftermarket pitman arms must be same configuration as OE for proper header fit.; Installation requires left side A/C bracket part number H7608. 1979 and later vehicles with short compressors can use the stock bracket.; Mid-Length; Original bellhousing frame mounts must be removed.; Will not fit if engine is located more than 3/4” forward for HEI firewall clearance. Fits with Trans Dapt PN 4195 or 4177, Danchuck PN 871, 12184, 17756, 17757, & 16339 or equivalent; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans |
| 1955 - 1956 | Chevrolet | Two-Ten Series | 4.3L V8 | Check motor mount position before ordering; Does not fit angle plug heads; Fits with stock or 605 steering boxes, aftermarket side engine mounts and rear trans cross member; Header is designed to fit cars using original V-8 pitman arm part number 3719487 not 6 cylinder pitman arm number 3709877. Aftermarket pitman arms must be same configuration as OE for proper header fit.; Installation requires left side A/C bracket part number H7608. 1979 and later vehicles with short compressors can use the stock bracket.; Mid-Length; Original bellhousing frame mounts must be removed.; Will not fit if engine is located more than 3/4” forward for HEI firewall clearance. Fits with Trans Dapt PN 4195 or 4177, Danchuck PN 871, 12184, 17756, 17757, & 16339 or equivalent; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans |
| 1957 | Chevrolet | Two-Ten Series | 4.3L V8, 4.6L V8 | Check motor mount position before ordering; Does not fit angle plug heads; Fits with stock or 605 steering boxes, aftermarket side engine mounts and rear trans cross member; Header is designed to fit cars using original V-8 pitman arm part number 3719487 not 6 cylinder pitman arm number 3709877. Aftermarket pitman arms must be same configuration as OE for proper header fit.; Installation requires left side A/C bracket part number H7608. 1979 and later vehicles with short compressors can use the stock bracket.; Mid-Length; Original bellhousing frame mounts must be removed.; Will not fit if engine is located more than 3/4” forward for HEI firewall clearance. Fits with Trans Dapt PN 4195 or 4177, Danchuck PN 871, 12184, 17756, 17757, & 16339 or equivalent; Will not fit with 168 tooth flywheels or kickout aftermarket Oil Pans |