Trade prices for dealers.

0

JBA Racing Headers Long Tube 351W Raw 409 for 1964-1973 Ford Mustang

Part # 6616S

Features

  • 3/8" thick CNC laser-cut flanges
  • Patented JBA Firecone® collector
  • O2 sensor provisions
  • Large diameter mandrel-bent steel tubes
  • Oversized exhaust ports

Description

JBA long tube headers are the number one choice for maximum performance gains and high RPM efficiency. Available in 409 or 304 Series Stainless Steel. These long tube designs are dyno and race proven to deliver the greatest possible increase in horsepower and torque throughout the RPM range. All JBA long tube headers feature large mandrel-bent stainless steel primary tubes, oversized exhaust ports, extra thick 3/8 one-piece flanges, and proprietary JBA Firecone® merged collectors for smooth flow. Each system is designed to give the maximum amount of ground clearance possible, so lowered cars do not drag the collectors.

Specifications

Catalytic Converter(s) IncludedNo
Collector Diameter2.5 in
Collector Port Diameter2.5 in
Collector Reducers IncludedYes
ColorGrey
DesignFull-length
EmissionFullDES2 - This product is Legal for use on Pre-Pollution Controlled Vehicles. It is legal for use on all vehicles produced Before Emissions Control Regulations were imposed. These are considered Uncontrolled Vehicles and are defined as follows; 1965 and Older US Manufactured California Certified Vehicles, 1967 and Older US Manufactured Federally Certified Vehicles, 1967 and Older Foreign Manufactured Vehicles
FinishUncoated
Flange Thickness3/8 in
Gasket Or Seal IncludedYes
Gaskets IncludedYes
Grade TypePerformance
Header Material409 Stainless Steel
Header StyleFull-length
Mounting Hardware IncludedYes
Oxygen Sensor PortNo
Primary Tube Outside Diameter1.75 in
Primary Tubing Diameter1.75 in
Sheen LevelMatte
Tube Wall Thickness0.059 in
UPC / GTIN00694342552237

Fits these vehicles

YearMakeModelEngineNote
1964 - 1965FordMustang4.3L V8, 4.7L V8Fits 65-73 Mustang with 351W Engine Swap.; Fits with stock or Borgeson Steering box.; Factory style Power Steering will require Ram drop down bracket part # 6656P.; Fits most Z-bars. Vehicles may require Z-Bar modification or new JBA Z-Bar P/N 1650Z for proper fit.; Installation requires welding/modification to exhaust system.; Must use 66 1/2 or later motor mounts (approx. 1” higher than 65 and early 66 style).; Fits 4 speed manual & C4/C6/AOD Transmissions.; Uncoated
1966FordMustang4.7L V8Fits 65-73 Mustang with 351W Engine Swap.; Fits with stock or Borgeson Steering box.; Factory style Power Steering will require Ram drop down bracket part # 6656P.; Fits most Z-bars. Vehicles may require Z-Bar modification or new JBA Z-Bar P/N 1650Z for proper fit.; Installation requires welding/modification to exhaust system.; Must use 66 1/2 or later motor mounts (approx. 1” higher than 65 and early 66 style).; Fits 4 speed manual & C4/C6/AOD Transmissions.; Uncoated
1967FordMustang4.7L V8, 6.4L V8, 7.0L V8Fits 65-73 Mustang with 351W Engine Swap.; Fits with stock or Borgeson Steering box.; Factory style Power Steering will require Ram drop down bracket part # 6656P.; Fits most Z-bars. Vehicles may require Z-Bar modification or new JBA Z-Bar P/N 1650Z for proper fit.; Installation requires welding/modification to exhaust system.; Must use 66 1/2 or later motor mounts (approx. 1” higher than 65 and early 66 style).; Fits 4 speed manual & C4/C6/AOD Transmissions.; Uncoated
1968FordMustang4.7L V8, 5.0L V8, 6.4L V8, 7.0L V8Fits 65-73 Mustang with 351W Engine Swap.; Fits with stock or Borgeson Steering box.; Factory style Power Steering will require Ram drop down bracket part # 6656P.; Fits most Z-bars. Vehicles may require Z-Bar modification or new JBA Z-Bar P/N 1650Z for proper fit.; Installation requires welding/modification to exhaust system.; Must use 66 1/2 or later motor mounts (approx. 1” higher than 65 and early 66 style).; Fits 4 speed manual & C4/C6/AOD Transmissions.; Uncoated
1969FordMustang5.0L V8, 5.8L V8, 6.4L V8, 7.0L V8Fits 65-73 Mustang with 351W Engine Swap.; Fits with stock or Borgeson Steering box.; Factory style Power Steering will require Ram drop down bracket part # 6656P.; Fits most Z-bars. Vehicles may require Z-Bar modification or new JBA Z-Bar P/N 1650Z for proper fit.; Installation requires welding/modification to exhaust system.; Must use 66 1/2 or later motor mounts (approx. 1” higher than 65 and early 66 style).; Fits 4 speed manual & C4/C6/AOD Transmissions.; Uncoated
1970 - 1971FordMustang5.0L V8, 5.8L V8, 7.0L V8Fits 65-73 Mustang with 351W Engine Swap.; Fits with stock or Borgeson Steering box.; Factory style Power Steering will require Ram drop down bracket part # 6656P.; Fits most Z-bars. Vehicles may require Z-Bar modification or new JBA Z-Bar P/N 1650Z for proper fit.; Installation requires welding/modification to exhaust system.; Must use 66 1/2 or later motor mounts (approx. 1” higher than 65 and early 66 style).; Fits 4 speed manual & C4/C6/AOD Transmissions.; Uncoated
1972 - 1973FordMustang5.0L V8, 5.8L V8Fits 65-73 Mustang with 351W Engine Swap.; Fits with stock or Borgeson Steering box.; Factory style Power Steering will require Ram drop down bracket part # 6656P.; Fits most Z-bars. Vehicles may require Z-Bar modification or new JBA Z-Bar P/N 1650Z for proper fit.; Installation requires welding/modification to exhaust system.; Must use 66 1/2 or later motor mounts (approx. 1” higher than 65 and early 66 style).; Fits 4 speed manual & C4/C6/AOD Transmissions.; Uncoated
C$1,377.99