MagnaFlow Exhaust Products Left OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter for BMW
Part # 52264
Features
- Durable 308 stainless steel MIG welds
- Simplifies installation with essential gaskets and hardware being included in the box
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
Description
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52264. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser f usion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 52264 interchanges with OE parts 18 32 7 645 441. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Specifications
| Position | Left |
|---|---|
| Air Tube Count | 0 |
| Body Material | Stainless Steel |
| Body Type | Spun |
| California Air Resources Board (CARB) Certified | No |
| CARB Executive Order Number | Not Applicable |
| Clamps Included | No |
| Finish | Stainless |
| Grade Type | Regular |
| Hangers Included | No |
| Heat Shield Attached | No |
| Inlet Gasket Included | No |
| Inlet Mounting Hardware Included | No |
| Inlet Type | Flange |
| Material | Stainless Steel |
| New York Certified | No |
| Outlet Gasket Included | No |
| Outlet Mounting Hardware Included | No |
| Outlet Type | Pipe Connection |
| Overall Length | 28.75 in |
| Oxygen Sensor Location | Pre Converter and Midbed |
| Sensor Port Count | 2 |
| Series | OEM Grade |
| Substrate Material | Ceramic |
| Tube Material | Stainless Steel |
| Universal Or Specific Fit | Specific |
| UPC / GTIN | 00888563205847 |
| Year | Make | Model | Submodel | Engine |
|---|---|---|---|---|
| 2014 - 2016 | BMW | 550i | - | 4.4L V8 |
| 2013 - 2015 | BMW | 550i GT | - | 4.4L V8 |
| 2013 - 2017 | BMW | 550i GT xDrive | - | 4.4L V8 |
| 2014 - 2016 | BMW | 550i xDrive | - | 4.4L V8 |
| 2013 - 2018 | BMW | 650i | - | 4.4L V8 |
| 2013 - 2019 | BMW | 650i Gran Coupe | - | 4.4L V8 |
| 2013 - 2018 | BMW | 650i xDrive | - | 4.4L V8 |
| 2013 - 2019 | BMW | 650i xDrive Gran Coupe | - | 4.4L V8 |
| 2013 - 2019 | BMW | 750i | - | 4.4L V8 |
| 2013 - 2019 | BMW | 750i xDrive | - | 4.4L V8 |
| 2013 - 2015 | BMW | 750Li | - | 4.4L V8 |
| 2013 - 2015 | BMW | 750Li xDrive | - | 4.4L V8 |
| 2015 - 2019 | BMW | Alpina B6 xDrive Gran Coupe | - | 4.4L V8 |
| 2013 - 2015 | BMW | Alpina B7 | - | 4.4L V8 |
| 2017 - 2019 | BMW | Alpina B7 | - | 4.4L V8 |
| 2013 - 2015 | BMW | Alpina B7L | - | 4.4L V8 |
| 2013 - 2015 | BMW | Alpina B7L xDrive | - | 4.4L V8 |
| 2013 - 2015 | BMW | Alpina B7 xDrive | - | 4.4L V8 |
| 2018 - 2019 | BMW | M550i xDrive | - | 4.4L V8 |
| 2014 | BMW | X5 | - | 4.4L V8 |
| 2015 - 2018 | BMW | X5 | xDrive50i | 4.4L V8 |
| 2015 - 2019 | BMW | X6 | xDrive50i | 4.4L V8 |