Leed Brakes Cross drilled and slotted rear rotor for Leed Brakes Conversion Kits for 1979-1981 Pontiac Firebird
Part # 5560001RCDS
Features
- Machined to OE specifications for optimal performance
Description
Reduce brake fade and increase your braking performance with our MaxGrip XDS cross drilled, slotted & zinc plated rotor. With cross drilled and slotted rotors, you remove gases that build up between the brake pad and rotor during heavy braking. The removal of this gas will give you better contact between the brake pad and rotor increasing your braking power. Oh yea, they look pretty cool too!
Specifications
| Position | Rear |
|---|---|
| ABS Tone Ring Included | No |
| Balancing Type | Yes |
| Bearings Included | No |
| Center Hole Diameter | 2.815 in |
| Construction | Full Cast |
| Conventional Or Drum-In-Hat Type Rotor | Conventional |
| Directional or Non-Directional Brake Surface | Directional |
| Disc Finish | Coated |
| Discard Thickness | .906 in |
| For Use with Stock Calipers | Yes |
| Grade Type | Performance |
| Hat Finish | Coated |
| Inside Diameter | 6.125 in |
| Intended Use | Street |
| Material | Cast Iron |
| Mounting Bolt Hole Circle Diameter | 4.750 in |
| Nominal Thickness | .980 in |
| Outside Diameter | 11.16 in |
| Pad Contact Surface Width | 2.100 in |
| Rotor Bolt Pattern | 5 x 4.75 and 5 x 4.5 |
| Rotor Diameter | 11.15 in. |
| Rotor Finish | Zinc Coating |
| Rotor Material | Cast Iron |
| Rotor Style | Max Grip XDS - Cross Drilled & Slotted |
| Rotor Thickness | .98 in. |
| Rust Resistant Coating | Yes |
| Solid Or Vented Type Rotor | Vented |
| Status | NEW |
| Surface Type | Slotted X Drilled |
| UPC / GTIN | 00887753627148 |
| Warranty | Limited Warranty, See PDF |
| Year | Make | Model |
|---|---|---|
| 1979 - 1981 | Pontiac | Firebird |