Trade prices for dealers.

0

KW V1 Coilover Kit for Audi and Porsche

Part # 10210090

Features

  • KW suspensions V1 coilovers are hand built by our expert team and given a uniquely individual serial number at our headquarters in Fichtenberg, Germany.
  • Every single damper is dyno tested to ensure functionality and guarantee accuracy before being released for delivery.
  • With the preset damping paired with vehicle specific spring rates precisely tuned by our engineers, V1 coilovers provide an optimum balance of sportiness and comfort while driving. KW takes the guess work out of setup for you.
  • Composite spring perch made from wear-resistant, friction-optimized polyamide composite encompassing a stainless-steel insert. The polyamide composite prevents oxidation while the stainless-steel insert maximizes strength.
  • Inox-Line Stainless Steel - Truly Permanent Corrosion Resistance. Inox-Line coatings will not wear off while adjusting the suspension making KW coilover struts 100 percent corrosion resistant with an unlimited lifespan.
  • Seamless Ride Height Adjustment - the corrosion resistance of the Inox-line stainless steel and composite perches means easy ride height adjustability to help you dial in your preferred look.
  • Elastomer Bump stop with integrated dust protection system prevents water and dirt particles reaching the piston rod and seals. The highly resilient bump stops act as dynamic load limiters while maintaining ride quality and durability.
  • Limited Lifetime Warranty - Unlimited Mileage

Description

The KW V1 INOX-LINE coilover kit is our entry point into our street performance lineup. The high-quality INOX-LINE stainless steel coilover struts, corrosion resistant springs, bumps stops and dampers that are optimally tuned by our engineers the result is a balanced and sporty feel specific to each vehicle application designed for long lasting driving pleasure. With KW V1 coilovers you can achieve maximum lowering within an approved lowering range that ensures a proper functioning suspension and adequate travel after your car is lowered. Even after years of use you can easily adjust the ride height thanks to the dirt resistant trapezoid thread and composite adjustment collar. KW INOX-LINE coilover rewards the sporty driver with its harmonious pre-configured setup. For each vehicle our engineers develop a specific damper setup and spring rate to increase the driving pleasure with an optimal balance of sportiness and practicality. As with all KW coilovers, the engineers at KW develop the vehicle-specific KW damper tuning and spring rates with comprehensive testing on the Nurburgring Nordschleife and in the KW 7-post chassis dynamics test center. Unlike a mass produced, generic coilover kit, KW coilovers are developed specifically for your vehicle. As a manufacturer, KW uses only its own resources, high quality components and the damper technology that was all developed in-house. With the KW V1 coilovers, body roll will be reduced during compression giving you the benefit of a more genuine and direct sporty handling while driving.

Specifications

Vehicle has Electronic Damper Control (EDC)NO
UPC / GTIN00842607075728
WarrantyLimited Lifetime warranty

Fits these vehicles

YearMakeModelSubmodelBody StyleEngineNote
2009 - 2010AudiQ5Premium, Premium Plus, PrestigeSport Utility3.2L V62: Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers); 10: For V2, V3 & Street Comfort coilovers, front shock absorbers need to be removed from the car for adjustment of stiffness; 62: Not for vehicles with electronic damping; Lowering Rate: F: 1.6-3.1" / R: 1.8-3.3"
2011 - 2012AudiQ5Premium, Premium Plus, PrestigeSport Utility2.0L I4, 3.2L V62: Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers); 10: For V2, V3 & Street Comfort coilovers, front shock absorbers need to be removed from the car for adjustment of stiffness; 62: Not for vehicles with electronic damping; Lowering Rate: F: 1.6-3.1" / R: 1.8-3.3"
2013AudiQ5Hybrid Prestige, Premium, Premium Plus, PrestigeSport Utility2.0L I4, 3.0L V62: Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers); 10: For V2, V3 & Street Comfort coilovers, front shock absorbers need to be removed from the car for adjustment of stiffness; 62: Not for vehicles with electronic damping; Lowering Rate: F: 1.6-3.1" / R: 1.8-3.3"
2014 - 2015AudiQ5Hybrid Prestige, Premium, Premium Plus, Prestige, TDI Premium Plus, TDI PrestigeSport Utility2.0L I4, 3.0L V62: Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers); 10: For V2, V3 & Street Comfort coilovers, front shock absorbers need to be removed from the car for adjustment of stiffness; 62: Not for vehicles with electronic damping; Lowering Rate: F: 1.6-3.1" / R: 1.8-3.3"
2016AudiQ5Hybrid Prestige, Premium, Premium Plus, Prestige, TDI Premium Plus, TDI Premium Plus S-Line, TDI Prestige, TDI Prestige S-LineSport Utility2.0L I4, 3.0L V62: Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers); 10: For V2, V3 & Street Comfort coilovers, front shock absorbers need to be removed from the car for adjustment of stiffness; 62: Not for vehicles with electronic damping; Lowering Rate: F: 1.6-3.1" / R: 1.8-3.3"
2017AudiQ5Premium, Premium Plus, PrestigeSport Utility2.0L I4, 3.0L V62: Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers); 10: For V2, V3 & Street Comfort coilovers, front shock absorbers need to be removed from the car for adjustment of stiffness; 62: Not for vehicles with electronic damping; Lowering Rate: F: 1.6-3.1" / R: 1.8-3.3"
2014 - 2017AudiSQ5Premium Plus, PrestigeSport Utility3.0L V62: Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers); 10: For V2, V3 & Street Comfort coilovers, front shock absorbers need to be removed from the car for adjustment of stiffness; 67: Valving is adjusted by adjustment knobs, rebound is only adjustable if the top of the piston rod is accessible. This will depend on the design of the vehicle.; Lowering Rate: F: 1.6-3.1" / R: 1.8-3.3"
2015 - 2016PorscheMacanS, TurboSport Utility3.0L V6, 3.6L V610: For V2, V3 & Street Comfort coilovers, front shock absorbers need to be removed from the car for adjustment of stiffness; 2: Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers); 54: Only for vehicles without air suspension; 62: Not for vehicles with electronic damping; 67: Valving is adjusted by adjustment knobs, rebound is only adjustable if the top of the piston rod is accessible. This will depend on the design of the vehicle.; Lowering Rate: F: 1.6-3.1" / R: 1.8-3.3"; without PASM
2017 - 2018PorscheMacanBase, GTS, S, TurboSport Utility2.0L I4, 3.0L V6, 3.6L V610: For V2, V3 & Street Comfort coilovers, front shock absorbers need to be removed from the car for adjustment of stiffness; 2: Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers); 54: Only for vehicles without air suspension; 62: Not for vehicles with electronic damping; 67: Valving is adjusted by adjustment knobs, rebound is only adjustable if the top of the piston rod is accessible. This will depend on the design of the vehicle.; Lowering Rate: F: 1.6-3.1" / R: 1.8-3.3"; without PASM
2019PorscheMacanBase, SSport Utility2.0L I4, 3.0L V610: For V2, V3 & Street Comfort coilovers, front shock absorbers need to be removed from the car for adjustment of stiffness; 2: Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers); 54: Only for vehicles without air suspension; 62: Not for vehicles with electronic damping; 67: Valving is adjusted by adjustment knobs, rebound is only adjustable if the top of the piston rod is accessible. This will depend on the design of the vehicle.; Lowering Rate: F: 1.6-3.1" / R: 1.8-3.3"; without PASM
2020 - 2021PorscheMacanBase, GTS, S, TurboSport Utility2.0L I4, 2.9L V6, 3.0L V610: For V2, V3 & Street Comfort coilovers, front shock absorbers need to be removed from the car for adjustment of stiffness; 2: Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers); 54: Only for vehicles without air suspension; 62: Not for vehicles with electronic damping; 67: Valving is adjusted by adjustment knobs, rebound is only adjustable if the top of the piston rod is accessible. This will depend on the design of the vehicle.; Lowering Rate: F: 1.6-3.1" / R: 1.8-3.3"; without PASM
2022PorscheMacanBase, GTS, SSport Utility2.0L I4, 2.9L V610: For V2, V3 & Street Comfort coilovers, front shock absorbers need to be removed from the car for adjustment of stiffness; 2: Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers); 54: Only for vehicles without air suspension; 62: Not for vehicles with electronic damping; 67: Valving is adjusted by adjustment knobs, rebound is only adjustable if the top of the piston rod is accessible. This will depend on the design of the vehicle.; Lowering Rate: F: 1.6-3.1" / R: 1.8-3.3"; without PASM
2023 - 2024PorscheMacanBase, GTS, S, TSport Utility2.0L I4, 2.9L V610: For V2, V3 & Street Comfort coilovers, front shock absorbers need to be removed from the car for adjustment of stiffness; 2: Height adjustable front and rear axles (front axle threaded strut housings, rear axle adjustable springs + dampers); 54: Only for vehicles without air suspension; 62: Not for vehicles with electronic damping; 67: Valving is adjusted by adjustment knobs, rebound is only adjustable if the top of the piston rod is accessible. This will depend on the design of the vehicle.; Lowering Rate: F: 1.6-3.1" / R: 1.8-3.3"; without PASM
C$3,509.00