Trade prices for dealers.

0

Mishimoto Baffled Oil Catch Can System for 2008-2014 Subaru Impreza and WRX

Part # MMBCC-WRX-08SBE

Features

  • Separates oil particles using 50 micron bronze filter
  • Application-specific brackets locate catch cans in a serviceable location
  • Fully sealed, billet 6061 aluminum catch cans

Description

The Mishimoto Baffled Oil Catch Can Kit is designed and engineered to work on your WRX to eliminate harmful blow by vapors from re-entering your engine. The EJ25 in the WRX is known for producing blow by gases during normal to severe driving, especially when more boost and horsepower is added to the engine. This oil blowby can work its way into your intake system, reducing the octane rating of your fuel and potentially causing damaging detonation, which has a profoundly negative effect on the already sensitive EJ25 engine. The kit uses our small baffled catch cans with a bronze filter, and internal baffled to better separate the oil from the crankcase vapors. The turbo inlet side of the kit utilizes our three-port baffled catch can to catch as much oil vapors as possible. It also includes two direct fit mounting brackets that not only is extremely easy to install but also fits right hand drive as well! The kit comes with six direct fit hoses that fit as if they were stock. The hoses are designed to fit right onto the PCV valve ports and into the turbo inlet ports. Plastic, barb fittings connect the hoses to the can. Like all of our products, this baffled catch can kit comes with Mishimoto's lifetime warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you've seen what We've seen in the bottom of our catch cans, you won't want that draining back into your oil either.

Specifications

Can FinishAnodized
Can Material6061-T6 Billet Aluminum
Can Outside Diameter2.5 in
Can TypeTwist Off
ColorBlack
Drain Plug IncludedYes
FinishPowder Coat
Height3.7 in
Hose IncludedYes
Inlet Port Inside Diameter0.6 in
Inlet Port Quantity per Can1
Install Difficulty4
Installation Difficulty3
Interior BaffleYes
Material6061 Aluminum
Maximum Can Capacity3 fl.oz
Mounting Bracket IncludedYes
Outlet Port Inside Diameter0.6 in
Outlet Port Quantity per Can1
SellingPoint01Direct fit for 2008-2014 Subaru WRX
SellingPoint02Separates oil particles using 50 micron bronze filter
SellingPoint03Application-specific brackets locate catch cans in a serviceable location
SellingPoint04Fully sealed, billet 6061 aluminum catch cans
SellingPoint05Protects turbocharged boxer engine from oil blow-by
SellingPoint06Helps maintain proper octane levels to reduce detonation
SellingPoint07Catch can and filters are fully serviceable
SellingPoint08Internal air diverter turbulates air longer to improve oil separation
SellingPoint09No cutting or modification required
SellingPoint10Offered with black, direct fit hoses
SellingPoint11Fits LHD and RHD models
UPC / GTIN00811580032813
WarrantyLifetime Warranty

Fits these vehicles

YearMakeModelSubmodel
2008SubaruImprezaWRX
2009SubaruImprezaWRX, WRX Premium
2010SubaruImprezaWRX, WRX GT, WRX Limited, WRX Premium, WRX SE
2011 - 2014SubaruImprezaWRX, WRX Limited, WRX Premium
2012SubaruWRXBase, STI
2013SubaruWRXBase, Limited, STI
2014SubaruWRXBase, Limited, SE, STI
C$656.99