Trade prices for dealers.

0

Control Arms, Bushings & Alignment: 3,697 Results

In stock
AL SHIMS 3X6X1.5 deg.(6)
  • Width - 3", Degree - 1.5, Length - 6"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
Special Order, Ships Nov 25
C$126.99Was C$138.42 Save 8%
View
CAS ADJ CAMS 2WD for Ford and Mazda
  • Front Adjustment Range: Caster ±2.00°
  • Provides adjustment for front caster
  • Required: 1 per wheel
Special Order, Ships Nov 25
C$94.99Was C$103.54 Save 8%
View
Caster/Camber Shims 1/16 (50)
  • Shim thickness: 1/16"
  • Box of (x50) Shims
  • 1-1/2 x 2-7/16
Special Order, Ships Nov 25
C$133.99Was C$146.05 Save 8%
View
Cross Shaft: 6 11/16in. Center
  • Excellent strength-to-weight ratio
  • Shaft Hole Spacing: 6-11/16"
  • 4130 Chrome Moly
Special Order, Ships Nov 25
C$249.00Was C$271.41 Save 8%
View
Freightliner Shim 1/16in. (6)
  • 1/16" (1.5875mm) Thickness
  • Box of (x6) Shims
  • 1-9/16" x 3-3/4"
Special Order, Ships Nov 25
C$42.99Was C$46.86 Save 8%
View
Freightliner Shim 1/32in. (6)
  • 1/32" (0.79375mm) Thickness
  • Box of (x6) Shims
  • 1-9/16" x 3-3/4"
Special Order, Ships Nov 25
C$39.99Was C$43.59 Save 8%
View
L RND RECVR 7/8-14
  • 4140 N Chromoly Steel and Grade 8 Bolt
  • Left Hand thread rod end receiver
  • Welds into stock tubing sizes
Special Order, Ships Nov 25
C$259.00Was C$282.31 Save 8%
View
Piston Dowel Pin Kit - 1/16in x .312in - 8 Pack
  • QA1 offers a variety of replacement & service parts to keep you on the road or track
  • Top notch tech support always ready to help
  • Keep your car performing at it's best
Special Order, Ships Nov 25
C$43.99Was C$47.95 Save 8%
View
Pitman Arm for 2007-2017 Jeep Wrangler JK
  • 4-7/8" drop to improve the drag link angle
  • Mounts to the factory steering box
  • Finished in a durable black e-coat
Special Order, Ships Nov 25
C$123.99Was C$135.15 Save 8%
View
Pitman Arm for Dodge
  • 5" drop to improve the drag link angle Forged design and machined for a precision fit Mounts to the factory steering box…
Special Order, Ships Nov 25
C$123.99Was C$135.15 Save 8%
View
Power Steering Dropped Pitman Arm for Jeep
  • Correct steering angles for vehicles with 4in of lift
  • Correct Steering Angles For Vehicles w/4 in. Of Lift
  • Covered Limited Lifetime Warranty
Special Order, Ships Nov 25
C$148.99Was C$162.40 Save 8%
View
Radius Arm Bushing for Ford
  • Limited Lifetime Warranty
  • More Durable Than Rubber
  • Eliminates Wandering
Special Order, Ships Nov 25
C$98.99Was C$107.90 Save 8%
View
Special Order, Ships Nov 25
C$56.99Was C$62.12 Save 8%
View
Special Order, Ships Nov 25
C$53.99Was C$58.85 Save 8%
View
R RND RECVR 5/8-18
  • 4140 N Chromoly Steel and Grade 8 Bolt
  • Right Hand thread rod end receiver
  • Welds into stock tubing sizes
Special Order, Ships Nov 25
C$229.00Was C$249.61 Save 8%
View
R SQR RECVR 1/2-20
  • 4140 N Chromoly Steel and Grade 8 Bolt
  • Right Hand thread rod end receiver
  • Welds into stock tubing sizes
Special Order, Ships Nov 25
C$289.00Was C$315.01 Save 8%
View
Special Order, Ships Nov 25
C$229.00Was C$249.61 Save 8%
View
Universal Bump Stops - H 39.7mm - 38.1mm Dia - Bullet Shaped
  • Engineered for dependable performance across a wide range of conditions
  • Durable materials support long-term use and consistent reliability
  • Designed for straightforward installation and dependable fit
Special Order, Ships Nov 25
C$44.99Was C$49.04 Save 8%
View
Weld-In Ring Kit 2.25 in. ID
  • Designed with optimal press fit for the xAxis
  • Use with SPC xAxis sealed flex joint
  • Includes two snap rings
Special Order, Ships Nov 25
C$48.99Was C$53.40 Save 8%
View
xAxis Sealed Flex Joint
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
Special Order, Ships Nov 25
C$93.99Was C$102.45 Save 8%
View
xAxis Sealed Flex Joint
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
Special Order, Ships Nov 25
C$92.99Was C$101.36 Save 8%
View
xAxis Sealed Flex Joint
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
Special Order, Ships Nov 25
C$94.99Was C$103.54 Save 8%
View
xAxis Sealed Flex Joint for 1999-2004 Ford Mustang Cobra
  • Replaces IRS Mustang Cobra with xAxis(TM) joints from SPC
  • Sealed joint retains grease and repels contaminants
  • Contains 1 per pack (4 needed for vehicle)
Special Order, Ships Nov 25
C$144.99Was C$158.04 Save 8%
View
ZINC SHIMS 2.5x5x1.0 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 2.5", Degree - 1.0, Length - 5"
  • Over-the-road Heavy Duty Truck shims
Special Order, Ships Nov 25
C$138.99Was C$151.50 Save 8%
View
ZINC SHIMS 2.5x5x2.0 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 2.5", Degree - 2.0, Length - 5"
  • Over-the-road Heavy Duty Truck shims
Special Order, Ships Nov 25
C$192.99Was C$210.36 Save 8%
View
ZINC SHIMS 3.5x6.25x1.0 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3.5", Degree - 1.0, Length - 6.25"
  • Over-the-road Heavy Duty Truck shims
Special Order, Ships Nov 25
C$219.00Was C$238.71 Save 8%
View
ZINC SHIMS 3 x 6 x 1.5 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3", Degree - 1.5, Length - 6"
  • Over-the-road Heavy Duty Truck shims
Special Order, Ships Nov 25
C$219.00Was C$238.71 Save 8%
View
ZINC SHIMS 3 x 6 x 3.0 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3", Degree - 3.0, Length - 6"
  • Over-the-road Heavy Duty Truck shims
Special Order, Ships Nov 25
C$269.00Was C$293.21 Save 8%
View
ZINC SHIMS 3 x 6 x 4.0 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3", Degree - 4.0, Length - 6"
  • Over-the-road Heavy Duty Truck shims
Special Order, Ships Nov 25
C$299.00Was C$325.91 Save 8%
View
1/64in. DUO FIT SHIM (25)
  • Zinc coated for superior corrosion resistance
  • Fits openings from 7/16" to 1/2"
  • 1/64" Shim thickness
Special Order, Ships Nov 25
C$36.99Was C$40.32 Save 8%
View
1 deg. NYLON CAMBER SHIM for 12 vehicles
  • Rear Adjustment Range: Toe ±1.00°
  • Rear Adjustment Range: Toe ±1.00˚
  • Required: 1 per wheel
Special Order, Ships Nov 25
C$35.99Was C$39.23 Save 8%
View
2-1/4 deg. Camber/Caster Sleeve for Ford
  • Clear Zinc coating for corrosion resistance
  • Recommended Tools: 77880 - Sleeve Puller
  • Required: 1 per wheel
Special Order, Ships Nov 25
C$53.99Was C$58.85 Save 8%
View
.38 deg. Camber/Toe SHIM for Nissan and Toyota
  • Full contact rear shims will correct camber and/or toe
  • 1 shim per wheel/per angle changed
  • Camber/Toe Change: .38 degrees
Special Order, Ships Nov 25
C$34.99Was C$38.14 Save 8%
View
38In. Quad Wrap Limit Strap
  • Stretch - Each limit strap typically stretches 1" over time for every 12" of length. See our guide to find the right…
Special Order, Ships Nov 25
C$76.99Was C$83.92 Save 8%
View
4 Wheel Drive C-Bushing for Ford
  • Limited Lifetime Warranty
  • Polyurethane Bushings
  • 4 Pieces
Special Order, Ships Nov 25
C$139.99Was C$152.59 Save 8%
View