Trade prices for dealers.

0

Control Arms, Bushings & Alignment: 18,952 Results

In stock
Upper Control Arm Front Right for Audi and Porsche
  • Adjusts camber and caster plus or minus 1.5 degrees
  • Kit includes both arms for the RIGHT side only
  • Comes with pinch bolt hardware
Special Order, Ships Nov 25
C$739.00Was C$805.51 Save 8%
View
Weld-In Ring Kit 2.25 in. ID
  • Designed with optimal press fit for the xAxis
  • Use with SPC xAxis sealed flex joint
  • Includes two snap rings
Special Order, Ships Nov 25
C$48.99Was C$53.40 Save 8%
View
xAxis Balljoint
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
Special Order, Ships Nov 25
C$120.99Was C$131.88 Save 8%
View
xAxis Jeep TJ/JK FLCA
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
Special Order, Ships Nov 25
C$130.99Was C$142.78 Save 8%
View
xAxis Jeep Track Bar
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
Special Order, Ships Nov 25
C$86.99Was C$94.82 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: RH 3/4" - 16 X 12mm BH X 50mm W
Special Order, Ships Nov 25
C$209.00Was C$227.81 Save 8%
View
xAxis Sealed Flex Joint
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
Special Order, Ships Nov 25
C$93.99Was C$102.45 Save 8%
View
ZINC SHIMS 2.5x5x0.5 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 2.5", Degree - 0.5, Length - 5"
  • Over-the-road Heavy Duty Truck shims
Special Order, Ships Nov 25
C$133.99Was C$146.05 Save 8%
View
ZINC SHIMS 3.5x6.25x1.0 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3.5", Degree - 1.0, Length - 6.25"
  • Over-the-road Heavy Duty Truck shims
Special Order, Ships Nov 25
C$219.00Was C$238.71 Save 8%
View
ZINC SHIMS 3.5x6.25x1.5 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3.5", Degree - 1.5, Length - 6.25"
  • Over-the-road Heavy Duty Truck shims
Special Order, Ships Nov 25
C$239.00Was C$260.51 Save 8%
View
Zinc Shims 4X6.5X4.0 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 4", Degree - 4.0, Length - 6.5"
  • Over-the-road Heavy Duty Truck shims
Special Order, Ships Nov 25
C$399.00Was C$434.91 Save 8%
View
1.0 Deg.-2.0 Deg. Linear Piston 25mm SBCT
  • QA1 offers a variety of replacement & service parts to keep you on the road or track
  • Top notch tech support always ready to help
  • Keep your car performing at it's best
Special Order, Ships Nov 25
C$105.99Was C$115.53 Save 8%
View
.10 deg. NYLON TOE SHIM for 12 vehicles
  • Rear Adjustment Range: Toe ±.10° (.05” / 1/16”)
  • Quickly change Toe on beam type axles
  • Required: 1 per wheel
Special Order, Ships Nov 25
C$34.99Was C$38.14 Save 8%
View
1/64in. DUO FIT SHIM (25)
  • Zinc coated for superior corrosion resistance
  • Fits openings from 7/16" to 1/2"
  • 1/64" Shim thickness
Special Order, Ships Nov 25
C$36.99Was C$40.32 Save 8%
View
.38 deg. Camber/Toe SHIM for Nissan and Toyota
  • Full contact rear shims will correct camber and/or toe
  • 1 shim per wheel/per angle changed
  • Camber/Toe Change: .38 degrees
Special Order, Ships Nov 25
C$34.99Was C$38.14 Save 8%
View
3 Series Rear Subframe Bushing Kit for BMW
  • Engineered in Australia and trusted worldwide; upgrade with confidence knowing Whiteline stands behind every product
  • Unlock noticeably improved handling and cornering grip that transforms your driving experience
  • Backed by Whiteline's Limited Lifetime warranty for lasting peace of mind
Special Order, Ships Nov 25
C$269.00Was C$293.21 Save 8%
View