Trade prices for dealers.

0

Tie Rods, Knuckles & Linkage: 521 Results

In stock
Tie Rod Kit for 2021-2026 Ford Bronco
  • Forged steel outer tie rod ends
  • 4140 chromoly inner ball studs
  • Limited lifetime warranty
In US Warehouse stock, Ships Nov 24
C$709.00Was C$772.81 Save 8%
View
Steering Arm for GMC and Chevrolet
  • Transfers Motion From The Drag Link To Knuckle
  • Limited Lifetime Warranty
In US Warehouse stock, Ships Nov 24
C$229.00Was C$249.61 Save 8%
View
LSV Electric 4x4 Outer Tie Rod End Kit for Polaris
  • Kit includes 2 tie rod ends and jam nuts (1 LH thread & 1 RH thread)
  • Housings have been strengthened in critical areas
In US Warehouse stock, Ships Nov 27
C$64.99Was C$70.84 Save 8%
View
Tie Rod End Sleeve Kit for 2021-2025 Ford Bronco
  • Prevents tie rods from bending when subject to off-road situations.Increase steering link diameter through the weakest…
In US Warehouse stock, Ships Nov 24
C$88.99Was C$97.00 Save 8%
View
Tie Rod End Kit for Honda, Kawasaki and Suzuki
  • Kit includes 2 tie rod ends and jam nuts (1 LH thread & 1 RH thread)
  • Housings have been strengthened in critical areas
In US Warehouse stock, Ships Nov 27
C$92.99Was C$101.36 Save 8%
View
Pickup Drag Link for GMC and Chevrolet
  • Allows For Maximum Articulation
  • Fits The Factory Tie Rod End
  • Limited Lifetime Warranty
In US Warehouse stock, Ships Nov 27
C$389.00Was C$424.01 Save 8%
View
Pickup Drag Link for Dodge
  • Allows For Maximum Articulation
  • Fits The Factory Tie Rod End
  • Limited Lifetime Warranty
In US Warehouse stock, Ships Nov 24
C$519.00Was C$565.71 Save 8%
View
HD Tie Rod Assembly NT for Jeep
  • Uses 7/8 in. Tie Rod Ends
  • 1/4 in. Wall Thickness
  • One Ton Strength
In US Warehouse stock, Ships Nov 24
C$399.00Was C$434.91 Save 8%
View
-Steer Knuckles for 2007-2018 Jeep Wrangler and Wrangler JK
  • EASY TO INSTALL -- Includes two 3-in. bump stops for easy installation
  • BUY WITH CONFIDENCE -- Comes with Rancho’s limited lifetime warranty
  • ENGINEERED TO LAST -- Made of high-strength steel for long life
In US Warehouse stock, Ships Nov 24
C$1,619.00Was C$1,764.71 Save 8%
View
Tie Rods for 2024-2025 Can-Am Maverick R
  • Corrosion Resistant— Durable black anodized finish complements your suspension styling while protecting the metal
  • Performance Strength— High-strength 6061 billet aluminum hex construction handles extreme off-road loads
  • Seamless Upgrade— Retains factory rod ends for perfect compatibility with the Maverick R platform
In US Warehouse stock, Ships Nov 27
C$319.00Was C$347.71 Save 8%
View
Hilux and Knuckle Kit for Toyota
  • Includes bearings, seals and wipers
  • Includes Bearings; Seals And Wipers
  • Services both sides
In US Warehouse stock, Ships Nov 27
C$369.00Was C$402.21 Save 8%
View
Rear Ind. Knuckle Side Kit for Yamaha
  • Kit includes necessary bearings, bushings, shafts, seals, and components needed to restore the upper and lower A-arms…
  • Two kits required per vehicle
In US Warehouse stock, Ships Nov 27
C$99.99Was C$108.99 Save 8%
View
Steering Tie-Rod System for 2021-2023 Ford Bronco
  • Maintenance Friendly: Fully sealed and greasable inner tie rod ends are easily greasable and rebuildable for maximum…
  • Added strength: Billet double-shear knuckle bracket for outer tie rod drastically improves strength against breakage.
  • Improved geometry: less thank HALF the toe change of the factory tie rod through the extended travel range
In US Warehouse stock, Ships Nov 24
C$2,189.00Was C$2,386.01 Save 8%
View
Tie Rod End For Replacement on rancho Lift Kit Only for Ram and Dodge
  • COMPATIBILITY -- Designed for 2002-2016 Ram 1500 4WD; doesn’t fit V6 diesel or vehicles equipped with air ride
  • GREASEABLE SOCKET -- Zerk fitting allows for easy maintenance by allowing new lubricant to flush contaminants
  • STRONG AND DURABLE -- Ball stud is heat treated to inhibit premature failure and improve fatigue strength
In US Warehouse stock, Ships Nov 24
C$188.99Was C$206.00 Save 8%
View
4x4 Outer Tie Rod End Kit for Polaris
  • Kit includes 2 tie rod ends and jam nuts (1 LH thread & 1 RH thread)
  • Housings have been strengthened in critical areas
In US Warehouse stock, Ships Nov 27
C$87.99Was C$95.91 Save 8%
View
Front Right Outer Right Outer Tie Rod End for 2000-2002 Toyota Sequoia and Tundra
  • ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
  • GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
In US Warehouse stock, Ships Nov 24
C$82.99Was C$90.46 Save 8%
View
Maverick X3 Outer Tie Rod End Kit for Can-Am
  • Kit includes 2 tie rod ends and jam nuts (1 LH thread & 1 RH thread)
  • Housings have been strengthened in critical areas
In US Warehouse stock, Ships Nov 27
C$76.99Was C$83.92 Save 8%
View
99-08 Honda TRX400EX Tie Rod Upgrade Kit
  • Tie rods are manufactured from seamless steel tubing or heavy-duty rods
  • Upgraded failure prone 10mm tie rod ends to heavy duty 12mm ends
In US Warehouse stock, Ships Nov 27
C$269.00Was C$293.21 Save 8%
View
Front Outer Outer Tie Rod End for Subaru and Saab
  • ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
  • GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
In US Warehouse stock, Ships Nov 24
C$90.99Was C$99.18 Save 8%
View
Tie Rod Upgrade Kit for Arctic Cat and Honda
  • Tie rods are manufactured from seamless steel tubing or heavy-duty rods
  • Upgraded failure prone 10mm tie rod ends to heavy duty 12mm ends
In US Warehouse stock, Ships Nov 27
C$269.00Was C$293.21 Save 8%
View
01-14 Honda TRX500FA Tie Rod Upgrade Kit
  • Tie rods are manufactured from seamless steel tubing or heavy-duty rods
  • Upgraded failure prone 10mm tie rod ends to heavy duty 12mm ends
In US Warehouse stock, Ships Nov 27
C$249.00Was C$271.41 Save 8%
View
400 4x4 w/AT Tie Rod Upgrade Kit for Arctic Cat
  • Tie rods are manufactured from seamless steel tubing or heavy-duty rods
  • Upgraded failure prone 10mm tie rod ends to heavy duty 12mm ends
In US Warehouse stock, Ships Nov 27
C$269.00Was C$293.21 Save 8%
View