Trade prices for dealers.

0

Search parts: 574,263 Results

In stock
Helmet Parts Kit with HANS/HNR 6mm Plastic Plugs
  • Instruction & Parts Pack For RaceQuip SA2015 Helmets
  • Also Includes Spare Plastic Pivot Washers, Instruction Sheet, and Decals
  • Nylon Construction
Out of Stock
C$15.36Was C$16.74 Save 8%
View
Manifold Downpipe Kit for Pontiac
  • Flowmaster Quality
  • Includes Hardware
  • Easy Installation
Out of Stock
C$436.73Was C$476.04 Save 8%
View
Manual Crimper Tool
  • Black/Silver
  • For Crimp-On Hose Ends
  • Made In The USA
Out of Stock
C$599.99Was C$653.99 Save 8%
View
Marine Carburetor
  • Performance Marine Calibration
  • J-Style Vent Tubes
  • Power valve blow-out protection
Out of Stock
C$1,407.99Was C$1,534.71 Save 8%
View
Modified PCM for 2019 Dodge Charger
  • Programmed for your vehicle
  • Professionally unlocked
  • Eliminate downtime for tuning!
Out of Stock
C$2,028.99Was C$2,211.60 Save 8%
View
Pro Classic Hose End
  • 37 Deg. AN Flare
  • 6061-T6 Aluminum
  • Positive Anti-Leak Seal
Out of Stock
C$548.99Was C$598.40 Save 8%
View
ProClassic I Hose
  • Easy to Cut And Assemble
  • Lightweight
  • Nylon Fiber Covered
Out of Stock
C$736.99Was C$803.32 Save 8%
View
ProClassic II Hose
  • Available In Sizes -4AN Thru -16AN
  • High-Quality Nylon Fiber Braid
  • Made Of Extruded CPE Synthetic Rubber
Out of Stock
C$3,918.99Was C$4,271.70 Save 8%
View
ProClassic Stainless Hose
  • For use with Fuel, Water, and Oils
  • For use with Russell ProClassic Hose Ends
  • Stainless Steel Covering
Out of Stock
C$509.99Was C$555.89 Save 8%
View
RS tuning module for BMW
  • 6 fine tuning mappings
  • Up to +20% MPG
Out of Stock
C$504.99Was C$550.44 Save 8%
View
Single Spring
  • Ultra-Lightweight for Reduced Unsprung Mass
  • Each Spring Individually Tested
  • Highest Linearity and Guaranteed Consistency
Out of Stock
C$121.99Was C$132.97 Save 8%
View
Single Spring
  • Ultra-Lightweight for Reduced Unsprung Mass
  • Each Spring Individually Tested
  • Highest Linearity and Guaranteed Consistency
Out of Stock
C$127.99Was C$139.51 Save 8%
View
Out of Stock
C$21.99Was C$23.97 Save 8%
View
Twist-Lok Hose
  • Available in several pre-cut lengths
  • Lightweight And Flexible
  • Pressure Rated Up To 250 psi
Out of Stock
C$2,456.99Was C$2,678.12 Save 8%
View
Universal Tunnel Patch for GM Vehicles
  • Over 60 Years of Conversion Experience
  • Simplifies Transmission Conversions
  • Custom Designed
Out of Stock
C$207.99Was C$226.71 Save 8%
View
Valve Covers - Vintage Series - Finned - SBC - Polished
  • Designed to fit all 1958-86 Small Block Chevy engines with perimeter bolt patterns
  • 3.3” tall (3.5" overall) with pre-installed internal oil baffles (oil fill and PCV grommets also included)
  • Offered in natural cast, polished, satin black with machined fins, and factory orange with machined fins
Out of Stock
C$433.99Was C$473.05 Save 8%
View
Vintage Series Oval Air Cleaner - Polished
  • Cast aluminum lid construction with stamped steel baseplate for optimal durability
  • Includes 2.5 inch tall, premium cotton gauze filter element for excellent filtration
  • Includes carburetor gasket and all mounting hardware necessary for installation
Out of Stock
C$289.99Was C$316.09 Save 8%
View
Vintage Series Oval Air Cleaner - Satin Black Machined
  • Cast aluminum lid construction with stamped steel baseplate for optimal durability
  • Includes 2.5 inch tall, premium cotton gauze filter element for excellent filtration
  • Includes carburetor gasket and all mounting hardware necessary for installation
Out of Stock
C$240.99Was C$262.68 Save 8%
View
VR1 Series Brushless Fuel Pump w/Controller Quick Kit
  • High flow and high pressure with low amperage draw
  • Designed to be submerged in your fuel cell for a clean installation
  • Maximum amp draw of the VR1 is 19 AMPS and 38 AMPS for the VR2
Out of Stock
C$1,707.99Was C$1,861.71 Save 8%
View
VR2 Brushless Fuel Pump w/Controller-Dual 10AN Inlet
  • Billet aluminum construction for durability and good looks
  • High flow and high pressure with low amperage draw
  • Maximum amp draw of 38 AMPS for the VR2
Out of Stock
C$5,462.99Was C$5,954.66 Save 8%
View
VR2 Brushless Fuel Pump w/Controller-Single 16AN Inlet
  • Billet aluminum construction for durability and good looks
  • High flow and high pressure with low amperage draw
  • Maximum amp draw of 38 AMPS for the VR2
Out of Stock
C$4,829.99Was C$5,264.69 Save 8%
View
Xtreme Energy DLC Hydraulic Flat Tappet Lifters for AMC & Chrysler Applications .904 Diameter - Single
  • Validated through rigorous endurance and load-cycle testing, these lifters are engineered with geometry and…
  • Delivers sustained, high-stability performance under race-level thermal and mechanical loads.
  • Fully compatible with all cast-iron and steel camshafts, ensuring stable surface interaction, controlled contact stress…
Out of Stock
C$15.99Was C$17.43 Save 8%
View
Z17 Evolution Coated Front and Rear Brake Kit for 2014-2015 INFINITI Q60
  • Includes Stainless-Steel Installation Hardware And High-Temperature Ceramic brake Lubricant
  • Multi-Layer Rubberized Shims Provide Virtually Noise-Free Braking
  • Buy With Confidence From The Originator Industry Leader Of Brake Kits
Out of Stock
C$718.00Was C$782.62 Save 8%
View
B8 5160 Rear Suspension Shock Absorber for 2014-2026 Ram 2500
  • 46mm monotube design ensures consistent, fade-free performance in all conditions
  • Self-adjusting deflective disc valving reacts immediately to surface changes enabling maximum vehicle control
  • Remote reservoir increases shock oil capacity for greater heat dissipation
Out of Stock
C$413.99Was C$451.25 Save 8%
View
1000 Universal
  • Limited Lifetime Warranty
  • Tough Molded Polyurethane
  • 3.00 Min. Diameter And 9.00 Max. Length
Out of Stock
C$206.99Was C$225.62 Save 8%
View
B12 (Pro-Kit) Front and Rear Suspension Kit for 2001-2009 Saab 9-5
  • Precise response, excellent driving dynamics and high reserves of safety
  • Offers even lowering between 25-40mm, depending on application
  • Eibach Pro-Kit performance suspension spring with progressive characteristics
Out of Stock
C$1,792.99Was C$1,954.36 Save 8%
View
Front Sway Bar Kit Only for Volkswagen
  • Precision-Tuned for Balance and Control:
  • Increased Vehicle Stability:
  • Made by Eibach in the USA
Out of Stock
C$427.99Was C$466.51 Save 8%
View
1350 CFM Gen 3 Ultra Dominator Carburetor
  • Designed for use on Drag race, Pro Street, or any high horsepower engines
  • Calibrations optimized for today's larger race engines and new fuels
  • Contoured hex head squirter screws for streamlined airflow
Out of Stock
C$2,624.99Was C$2,861.24 Save 8%
View
8-Button CAN Keypad
  • Can be mounted vertically or horizontally
  • Backlighting color customizable
  • Fully programmable via AEMcal software
Out of Stock
C$769.93Was C$839.22 Save 8%
View
950 CFM Gen 3 Ultra Dominator Carburetor
  • Designed for use on Drag race, Pro Street, or any high horsepower engines
  • Calibrations optimized for today's larger race engines and new fuels
  • Contoured hex head squirter screws for streamlined airflow
Out of Stock
C$2,034.99Was C$2,218.14 Save 8%
View
950 CFM Gen 3 Ultra Dominator Carburetor
  • Designed for use on Drag race, Pro Street, or any high horsepower engines
  • Calibrations optimized for today's larger race engines and new fuels
  • Contoured hex head squirter screws for streamlined airflow
Out of Stock
C$2,234.99Was C$2,436.14 Save 8%
View
Accessory for 2015-2018 Ford Mustang
  • Cleanest Install For PMT
  • Very Simple Installation
  • Can Be Matched To Any Interior Color
Out of Stock
C$104.99Was C$114.44 Save 8%
View
Accessory for Dodge
  • Cleanest Install For PMT
  • Very Simple Installation
  • Can Be Matched To Any Interior Color
Out of Stock
C$104.99Was C$114.44 Save 8%
View
Adapter Fitting
  • 37 Deg. Sealing Angle
  • Ensures Precise Thread Engagement
  • Precision Machined
Out of Stock
C$399.99Was C$435.99 Save 8%
View
B12 (Pro-Kit) Front and Rear Suspension Kit for 1992-1995 Honda Civic
  • Precise response, excellent driving dynamics and high reserves of safety
  • Offers even lowering between 25-40mm, depending on application
  • Eibach Pro-Kit performance suspension spring with progressive characteristics
Out of Stock
C$1,254.99Was C$1,367.94 Save 8%
View
B12 (Pro-Kit) Front and Rear Suspension Kit for 2010-2013 Mazda 3
  • Precise response, excellent driving dynamics and high reserves of safety
  • Offers even lowering between 25-40mm, depending on application
  • Eibach Pro-Kit performance suspension spring with progressive characteristics
Out of Stock
C$1,621.99Was C$1,767.97 Save 8%
View