Trade prices for dealers.

0

AN Fittings, Hose & Clamps: 13,649 Results

In stock
Auto-Fit Hose End
  • Suitable For Most Applications
Out of Stock
C$285.99Was C$311.73 Save 8%
View
Auto-Fit Hose End
  • Easy To Assemble
  • Barbed Nipple
  • No Spiral Leak Path
Out of Stock
C$374.99Was C$408.74 Save 8%
View
Auto-Fit Hose End
  • Easy To Assemble
  • Barbed Nipple
  • No Spiral Leak Path
Out of Stock
C$560.99Was C$611.48 Save 8%
View
Female DIN 24 Cone Swivel Light Series to Male JIC 37 Male M22x1.5 to 3/4-16 Hydraulic Adapter
  • Available in the following configuration: SAE to SAE, British to SAE, Metric to SAE, International to International…
  • Flange adapters rated to 6000 psi for replacing bent tube assemblies with standard stock couplings
  • Conforms to SAE and ASME specifications (rated to SAE 100R2 pressure maximum)
Out of Stock
C$149.99Was C$163.49 Save 8%
View
Female Inverted Flare to Male Pipe - 45 Deg - 4MP-5FI45 352x5x4
  • Underwriters Laboratories listed (available special order only) for fuel equipment and gas
  • Temperature Range: -65 Deg. F to +250 Deg. F (-53 Deg. C to +121 Deg. C)
  • Used with copper, brass, aluminum and steel tubing that can be flared
Out of Stock
C$44.99Was C$49.04 Save 8%
View
Hydraulic Adapter Male Metric O-Ring Plug M30x2.0 Thread
  • Available in the following configuration: SAE to SAE, British to SAE, Metric to SAE, International to International…
  • Flange adapters rated to 6000 psi for replacing bent tube assemblies with standard stock couplings
  • Conforms to SAE and ASME specifications (rated to SAE 100R2 pressure maximum)
Out of Stock
C$97.99Was C$106.81 Save 8%
View
Hydraulic GlobalSpiral MAX Pressure Code 62 O-Ring Flange Heavy - 90 Bent Tube
  • A flexible, easier-to-route hose assembly to replace 2 in. rigid pipe on crowded equipment platforms
  • Greater power and capacity from existing equipment by replacing 2 in., 5000 psi hose assemblies
  • A stem machined from a single piece of solid steel for greater strength and integrity
Out of Stock
C$579.00Was C$631.11 Save 8%
View
Male Inverted Flare Plug - 3/16in A1 OD 3/8-24in T1 Thread
  • Underwriters Laboratories listed (available special order only) for fuel equipment and gas
  • Temperature Range: -65 Deg. F to +250 Deg. F (-53 Deg. C to +121 Deg. C)
  • Used with copper, brass, aluminum and steel tubing that can be flared
Out of Stock
C$26.99Was C$29.42 Save 8%
View
Straight 3/8" Hose Barb to 3/8" NPT (ANOTUFF)
  • Must use PTFE tape or sealing compound during assembly. Hose side to be used with hose clamp. DO NOT overtorque.
Out of Stock
C$37.99Was C$41.41 Save 8%
View
Swivel-Seal® Hose End
  • Stainless Retention Pins Allow 360° Adjustment After Installation
Out of Stock
C$94.99Was C$103.54 Save 8%
View
Swivel-Seal® Hose End
  • Dual Plane Anti-Seepage Seal
  • Low Progile Design
  • Precision Machined
Out of Stock
C$45.99Was C$50.13 Save 8%
View
Swivel-Seal® Hose End
  • Stainless Retention Pins Allow 360° Adjustment After Installation
Out of Stock
C$141.99Was C$154.77 Save 8%
View
Tee Connector 5/16in (Plastic)
  • Using straight, elbow and tee shapes almost any hose configuration can be constructed
  • Anti-rotation device prevents hose twisting
  • Bulkheads assure proper insertion depths
Out of Stock
C$31.99Was C$34.87 Save 8%
View
V-8 5.0L Upper Molded Coolant Hose for 2015-2017 Ford Mustang
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Specifically-engineered materials resist collapse under vacuum
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$289.00Was C$315.01 Save 8%
View
V-8 5.0L Upper Molded Coolant Hose for 29 vehicles
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$60.99Was C$66.48 Save 8%
View
V-8 5.0L Upper Molded Coolant Hose for 9 vehicles
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$52.99Was C$57.76 Save 8%
View
V-8 5.2L Lower Molded Coolant Hose for 123 vehicles
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$80.99Was C$88.28 Save 8%
View
V-8 5.3L Coolant Air Bleed Crossover Pipe Heater Hose for 32 vehicles
  • Heavy-gauge steel tubing, superior welds and a high quality tube coating provide resistance to corrosion, rust and…
  • Designed and constructed for long service life in tough environmental conditions
  • Includes everything necessary for a complete assembly repair
Out of Stock
C$229.00Was C$249.61 Save 8%
View
V-8 5.3L Coolant Air Bleed Crossover Pipe Heater Hose for 41 vehicles
  • Heavy-gauge steel tubing, superior welds and a high quality tube coating provide resistance to corrosion, rust and…
  • Designed and constructed for long service life in tough environmental conditions
  • Includes everything necessary for a complete assembly repair
Out of Stock
C$147.99Was C$161.31 Save 8%
View
V-8 5.3L Upper Molded Coolant Hose for 23 vehicles
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$51.99Was C$56.67 Save 8%
View
V-8 5.7L Valve To Eng. Molded Heater Hose for 4 vehicles
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Caution: Do not use for fuel or oil transfer applications
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Out of Stock
C$116.99Was C$127.52 Save 8%
View
V-8 6.0L Lower Molded Coolant Hose for 2003-2007 Hummer H2
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$239.00Was C$260.51 Save 8%
View
V-8 6.0L Lower Molded Coolant Hose for 2008-2009 Pontiac G8
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$128.99Was C$140.60 Save 8%
View
V-8 6.0L Lower Molded Coolant Hose for Chevrolet and GMC
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$192.99Was C$210.36 Save 8%
View
V-8 6.0L Upper Molded Coolant Hose for Chevrolet and GMC
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$75.99Was C$82.83 Save 8%
View
V-8 6.0L Upper Molded Coolant Hose for GMC and Chevrolet
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$209.00Was C$227.81 Save 8%
View