Trade prices for dealers.

0

Engine: 171,105 Results

In stock
Late Model Dual Pump Module Relay Kit for Dodge, Chrysler and Ford
  • Includes essential parts necessary to wire twin pump Mustang (12-153/12-175) or Challenger/Charger (12-154/12-176)…
  • Includes two fuse holders and 30A fuses, one for each pump
  • Includes connector kit composed of heat shrink sealing connectors for all wiring connections
Out of Stock
C$330.99Was C$360.78 Save 8%
View
Marine Carburetor
  • Universal Marine Calibration
  • J-Style Vent Tubes
  • Power valve blow-out protection
Out of Stock
C$1,135.99Was C$1,238.23 Save 8%
View
Pro Flo 4 EFI ECU and Electronics Kit for Ford 351 Windsor Engines
  • Economical EFI System solution for Ford 351W users with existing EFI components Simplified installation, providing all…
  • Simplified installation, providing all existing features of Pro Flo 4 EFI
Out of Stock
C$2,197.99Was C$2,395.81 Save 8%
View
Pro-Flo 4 Standalone ECU and Harness Kit, No Distributor
  • Economical EFI System solution for users with existing EFI system and components.
  • Simplified installation, providing all existing features of Pro Flo 4 EFI
Out of Stock
C$1,797.99Was C$1,959.81 Save 8%
View
Track Warrior Carburetor for 578 vehicles
  • Screw in air bleeds for precision tuning capabilities
  • Four corner idle for precise idle control
  • Available in 650, 750, and 850 CFM versions
Out of Stock
C$1,557.99Was C$1,698.21 Save 8%
View
Tunnel Ram Carburetor
  • Universal Holley 4-Barrel Carburetor
  • Mechanical secondaries
  • Gold dichromate finish resists corrosion
Out of Stock
C$1,088.99Was C$1,187.00 Save 8%
View
Ultra Double Pumper Marine Carburetor
  • Factory preset electric choke for easy startups
  • Mechanical secondaries for awesome performance
  • Aluminum construction for a 43% weight savings
Out of Stock
C$1,213.99Was C$1,323.25 Save 8%
View
Ultra Street Avenger Carburetor for 578 vehicles
  • Factory preset electric choke for easy startups
  • 4 corner idle allows you to precisely control your idle system
  • Aluminum construction for a 43% weight savings
Out of Stock
C$1,574.99Was C$1,716.74 Save 8%
View
Xtreme Energy DLC Solid Flat Tappet Lifters for AMC & Chrysler Applications (No Oil Band, No PR Oiling) .904 Diameter - Set of 12
  • Validated through rigorous endurance and load-cycle testing, these lifters are engineered with geometry and…
  • Delivers sustained, high-stability performance under race-level thermal and mechanical loads.
  • Fully compatible with all cast-iron and steel camshafts, ensuring stable surface interaction, controlled contact stress…
Out of Stock
C$253.99Was C$276.85 Save 8%
View
670 CFM Ultra Street Avenger Carburetor
  • Factory preset electric choke for easy startups
  • 4 corner idle allows you to precisely control your idle system
  • Aluminum construction for a 43% weight savings
Out of Stock
C$1,180.99Was C$1,287.28 Save 8%
View
750CFM Ultra XP Carburetor
  • E85 specific calibration
  • Stainless steel throttle plates
  • Includes notched float and jet extensions
Out of Stock
C$1,740.99Was C$1,897.68 Save 8%
View
850CFM Ultra XP Carburetor
  • Aluminum Construction (saves 4.5 lbs - 38% weight savings)
  • Mechanical Secondaries for perfect off the line launches
  • Includes notched float and jet extensions
Out of Stock
C$1,687.99Was C$1,839.91 Save 8%
View
Accelerator Pump Cover
  • Replacement 30cc accelerator pump cover for Hard Core Gray aluminum carburetors with black hardware
  • Includes mounting screws and lever
Out of Stock
C$33.99Was C$37.05 Save 8%
View
Base Gasket
  • Fit Holley Model 4010™, Model 4150™ and Model 4160™
  • 1 3/4" Throttle Bore
  • 5/16" Thick
Out of Stock
C$67.99Was C$74.11 Save 8%
View
Choke Control Cable Hardware
  • Manual Choke
  • Cable Clamp Kit
  • Vacuum Secondary Mount
Out of Stock
C$51.99Was C$56.67 Save 8%
View
Fueling - Stage 3+ MPI and LPFP - 2.0T EA888 Gen 3 for Audi and Volkswagen
  • More Fuel and More Power: Provides the required fueling to support APR Stage 3+ power levels.
  • Proper MPI/GDI Fuel Distribution: The fuel distribution block ensures fuel is properly delivered to the both sets of…
  • Ethanol Compatible Hardware: Fully Ethanol / E85 compatible injectors, fuel pump and associated hardware.
Out of Stock
C$2,689.99Was C$2,932.09 Save 8%
View
Gen 3 Ultra Dominator Carburetor
  • Designed for use on Drag race, Pro Street, or any high horsepower engines
  • Calibrations optimized for today's larger race engines and new fuels
  • Contoured hex head squirter screws for streamlined airflow
Out of Stock
C$2,641.99Was C$2,879.77 Save 8%
View
Marine Carburetor
  • Performance Marine Calibration
  • J-Style Vent Tubes
  • Power valve blow-out protection
Out of Stock
C$1,407.99Was C$1,534.71 Save 8%
View
Out of Stock
C$21.99Was C$23.97 Save 8%
View
Valve Covers - Vintage Series - Finned - SBC - Polished
  • Designed to fit all 1958-86 Small Block Chevy engines with perimeter bolt patterns
  • 3.3” tall (3.5" overall) with pre-installed internal oil baffles (oil fill and PCV grommets also included)
  • Offered in natural cast, polished, satin black with machined fins, and factory orange with machined fins
Out of Stock
C$433.99Was C$473.05 Save 8%
View
Vintage Series Oval Air Cleaner - Polished
  • Cast aluminum lid construction with stamped steel baseplate for optimal durability
  • Includes 2.5 inch tall, premium cotton gauze filter element for excellent filtration
  • Includes carburetor gasket and all mounting hardware necessary for installation
Out of Stock
C$289.99Was C$316.09 Save 8%
View
Vintage Series Oval Air Cleaner - Satin Black Machined
  • Cast aluminum lid construction with stamped steel baseplate for optimal durability
  • Includes 2.5 inch tall, premium cotton gauze filter element for excellent filtration
  • Includes carburetor gasket and all mounting hardware necessary for installation
Out of Stock
C$240.99Was C$262.68 Save 8%
View
VR1 Series Brushless Fuel Pump w/Controller Quick Kit
  • High flow and high pressure with low amperage draw
  • Designed to be submerged in your fuel cell for a clean installation
  • Maximum amp draw of the VR1 is 19 AMPS and 38 AMPS for the VR2
Out of Stock
C$1,707.99Was C$1,861.71 Save 8%
View
VR2 Brushless Fuel Pump w/Controller-Dual 10AN Inlet
  • Billet aluminum construction for durability and good looks
  • High flow and high pressure with low amperage draw
  • Maximum amp draw of 38 AMPS for the VR2
Out of Stock
C$5,462.99Was C$5,954.66 Save 8%
View
VR2 Brushless Fuel Pump w/Controller-Single 16AN Inlet
  • Billet aluminum construction for durability and good looks
  • High flow and high pressure with low amperage draw
  • Maximum amp draw of 38 AMPS for the VR2
Out of Stock
C$4,829.99Was C$5,264.69 Save 8%
View
Xtreme Energy DLC Hydraulic Flat Tappet Lifters for AMC & Chrysler Applications .904 Diameter - Single
  • Validated through rigorous endurance and load-cycle testing, these lifters are engineered with geometry and…
  • Delivers sustained, high-stability performance under race-level thermal and mechanical loads.
  • Fully compatible with all cast-iron and steel camshafts, ensuring stable surface interaction, controlled contact stress…
Out of Stock
C$15.99Was C$17.43 Save 8%
View
1350 CFM Gen 3 Ultra Dominator Carburetor
  • Designed for use on Drag race, Pro Street, or any high horsepower engines
  • Calibrations optimized for today's larger race engines and new fuels
  • Contoured hex head squirter screws for streamlined airflow
Out of Stock
C$2,624.99Was C$2,861.24 Save 8%
View
950 CFM Gen 3 Ultra Dominator Carburetor
  • Designed for use on Drag race, Pro Street, or any high horsepower engines
  • Calibrations optimized for today's larger race engines and new fuels
  • Contoured hex head squirter screws for streamlined airflow
Out of Stock
C$2,034.99Was C$2,218.14 Save 8%
View
950 CFM Gen 3 Ultra Dominator Carburetor
  • Designed for use on Drag race, Pro Street, or any high horsepower engines
  • Calibrations optimized for today's larger race engines and new fuels
  • Contoured hex head squirter screws for streamlined airflow
Out of Stock
C$2,234.99Was C$2,436.14 Save 8%
View
Out of Stock
C$33.99Was C$37.05 Save 8%
View
Fuel Hose Kit
  • Billet Construction
  • Flows Up To 130 Gallons Per Hour
  • Supplied w/.1250 in. NPT Female Port
Out of Stock
C$157.99Was C$172.21 Save 8%
View
Gen 3 Marine Ultra Dominator Carburetor
  • Designed for use on Marine high horsepower engines
  • Contoured hex head squirter screws for streamlined airflow
  • J-Style vent tubes
Out of Stock
C$3,043.99Was C$3,317.95 Save 8%
View
Heat Shield Kit
  • Fits Holley Model 4010™, Model 4150™, and Model 4160™
Out of Stock
C$108.99Was C$118.80 Save 8%
View
Out of Stock
C$2,122.99Was C$2,314.06 Save 8%
View
Out of Stock
C$2,961.99Was C$3,228.57 Save 8%
View
Turbocharger for Ford
  • Turbocharger
Out of Stock
C$3,144.99Was C$3,428.04 Save 8%
View
Valve Covers - Muscle Series - Finned - SBC - Factory Orange
  • Designed to fit all 1958-86 Small Block Chevy engines with perimeter bolt patterns
  • Standard height valve cover with pre-installed internal oil baffles
  • Factory style twist-in oil fill cap, round Holley emblem, and square oil fill and PCV grommets included
Out of Stock
C$681.99Was C$743.37 Save 8%
View
Vintage Series GM Licensed Air Cleaner - Satin Black Machined
  • 14” diameter die-cast aluminum construction with finned design and an iconic Chevy “Bowtie” logo
  • Available with replacement paper filter or reusable cotton gauze (red) style air filter elements
  • Licensed by GM
Out of Stock
C$366.99Was C$400.02 Save 8%
View