Trade prices for dealers.

0

Engine: 171,105 Results

In stock
Carburetor Adapter Plate
  • Cast aluminum
  • Can also be used in reverse
  • Will allow any 4150 or 4160 carburetor to be mounted on manifolds designed originally for Rochester Quadra-Jet or Carter…
Out of Stock
C$189.99Was C$207.09 Save 8%
View
Carburetor Throttle Cable Bracket
  • Kit Contains Bracket and Longer Carburetor Mounting Stud.
Out of Stock
C$106.99Was C$116.62 Save 8%
View
Classic Carburetor for 578 vehicles
  • Calibrated and intended for small V-8 engines
  • Single feed fuel inlet for easy installation
  • Power valve blow-out protection
Out of Stock
C$1,360.99Was C$1,483.48 Save 8%
View
DIRECT MOUNT FUEL PULSE DAMPER
  • Fittings included for damper/regulator’s and direct mount dampers
  • Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
  • Assembled and tested in the USA
Out of Stock
C$220.99Was C$240.88 Save 8%
View
Flexible In Tank Fuel Line
  • 8MM ID
  • 160MM Long
  • Compatible for all fuel types
Out of Stock
C$10.99Was C$11.98 Save 8%
View
Fuel Cell EFI Pump Module Assembly
  • Update your fuel cell to EFI the easy way!
  • Designed to drop right into your existing 12 bolt flange fuel cell
  • Module with Dual 255 LPH fuel pumps configurations
Out of Stock
C$1,440.99Was C$1,570.68 Save 8%
View
Fuel Filter Element and O-ring Kit
  • Replacement filter element for 175 GPH Holley billet fuel filter
  • Includes 100 micron stainless steel woven mesh filter element and O-rings
Out of Stock
C$42.99Was C$46.86 Save 8%
View
Fuel Line
  • Rugged Billet Construction
  • AN fittings
  • Red and Blue Anodized
Out of Stock
C$360.99Was C$393.48 Save 8%
View
Hi-Ram Lower Manifold - GM LS3/L92
  • Plenum Top Gasket Type – 3/32” Round O-ring Cord
  • Port Size – 2.49” Height x 1.21” Wide
  • Mounting Flange Gasket Type – Standard LS3 Molded O-Ring
Out of Stock
C$1,451.99Was C$1,582.67 Save 8%
View
Hi-Ram Lower Manifold - GM LS7
  • Mounting Flange Gasket Type – Standard LS3 Molded O-Ring
  • Plenum Top Gasket Type – 3/32” Round O-ring Cord
  • Port Size – 2.49” Height x 1.21” Wide
Out of Stock
C$1,451.99Was C$1,582.67 Save 8%
View
Out of Stock
C$499.99Was C$544.99 Save 8%
View
Replacement Hardware Kit
  • Replacement Hardware for Gen III Hemi Mid-Mount Accessory Drive System
Out of Stock
C$102.99Was C$112.26 Save 8%
View
Replacement Main Body
  • Main bodies are factory assembled and kit includes new gaskets to complete the installation
  • Simple installation with common hand tools that you already have in your shop
  • Main bodies are available for our most popular carburetor models
Out of Stock
C$289.99Was C$316.09 Save 8%
View
RetroFilter Drive-By-Wire Air Cleaner - 16-Inch Diameter - Black
  • Available in Black and Chrome finishes
  • Adapts to LS style drive-by-wire throttle bodies found on the LS2, LS3, LS7, etc.
  • Stamped aluminum lid and base for optimal durability and light weight
Out of Stock
C$346.99Was C$378.22 Save 8%
View
Out of Stock
C$991.99Was C$1,081.27 Save 8%
View
Cold Air Intake for BMW
  • Enjoyably louder, sportier sound.
  • Improved throttle response
  • Quick and easy installation
Out of Stock
C$858.99Was C$936.30 Save 8%
View
11" x 11" HydraMat®, Cross
  • Works with Alcohol, Ethanol, Methanol, and E-85 fuels
  • Works with 2-cycle oil blends as high as 20:1
  • Not for use with diesel fuels
Out of Stock
C$681.99Was C$743.37 Save 8%
View
4 Port VR Series Fuel Pressure Regulator
  • EFI regulators are adjustable from 40-100 PSI base pressure
  • Compatible with gasoline, methanol, and E85* (Compatible with
  • 1/8” NPT gauge port
Out of Stock
C$681.99Was C$743.37 Save 8%
View
650 CFM Ultra Double Pumper Carburetor
  • Factory preset electric choke for easy startups
  • Mechanical secondaries for awesome tire turning performance
  • Aluminum construction for a 43% weight savings
Out of Stock
C$1,242.99Was C$1,354.86 Save 8%
View
850 CFM Competition Double Pumper Carburetor-Aluminum
  • No choke for maximum airflow
  • Mechanical secondaries for awesome tire turning performance
  • Dual feed fuel inlets for constant high volume fuel delivery
Out of Stock
C$1,205.99Was C$1,314.53 Save 8%
View
8" x 8" HydraMat, Cross
  • Works with Alcohol, Ethanol, Methanol, and E-85 fuels
  • Works with 2-cycle oil blends as high as 20:1
  • Not for use with diesel fuels
Out of Stock
C$526.99Was C$574.42 Save 8%
View
Alternator Relocation Kit (150amp Alternator w/bracket kit)
  • Design allows more chassis clearance for swap applications
  • Original equipment look and reliability
  • LT4 style standard 105 amp and premium 150 amp model alternator options available
Out of Stock
C$2,770.99Was C$3,020.38 Save 8%
View
Analog Style Fuel Pressure Gauge
  • LED dimmable backlit design with red pointers makes them easy to read day or night
  • All gauges are electric style and include sending units depending on gauge type
  • Spin lock ring threads to back of gauge case for simple and secure gauge mounting
Out of Stock
C$597.99Was C$651.81 Save 8%
View
Billet Regulator Bracket
  • Clear anodized billet construction
  • Simplifies mounting Holley fuel pressure regulators
  • Included hardware for easy installation
Out of Stock
C$130.99Was C$142.78 Save 8%
View
Cable Bracket
  • Light-Weight Billet Aluminum
  • Black Anodized For Long Lasting Good Looks
  • For Lokar Style cable
Out of Stock
C$89.99Was C$98.09 Save 8%
View
DryFlow Air Filter for 2010-2012 Hyundai Genesis Coupe
  • Engineered to boost horsepower and sharpen throttle response, giving your vehicle stronger, more immediate performance.
  • Proudly manufactured in the USA with high-quality materials and precision standards.
  • Will NOT void your vehicle’s warranty, performance you can install with total confidence.
Out of Stock
C$71.99Was C$78.47 Save 8%
View
Equipped Billet Fuel Cell Cap
  • Features 5.343'' 12-bolt flange
  • Large 3'' opening
  • Stainless steel hardware included
Out of Stock
C$307.99Was C$335.71 Save 8%
View
Flexible In Tank Fuel Line
  • 8MM ID
  • 120MM Long
  • Compatible for all fuel types
Out of Stock
C$7.99Was C$8.71 Save 8%
View
Fuel Bowl Plug Gasket
  • Fits All Holley Quick Change Fuel Bowls
  • 10 Pack
Out of Stock
C$18.99Was C$20.70 Save 8%
View
Fuel Cell EFI Pump Module Assembly
  • Update your fuel cell to EFI the easy way!
  • Designed to drop right into your existing 6 bolt flange fuel cell
  • Module with Dual 255 LPH fuel pumps configurations
Out of Stock
C$1,280.99Was C$1,396.28 Save 8%
View
Gerotor Replacement Kit
  • Gerotor kit for 12125 and 12-150 fuel pumps
  • Includes lower gasket, wear plate, wear plate O-ring and geroter set
Out of Stock
C$262.99Was C$286.66 Save 8%
View
GM Muscle Series Air Cleaner - Satin Black Machined
  • Features clean, modern styling with high definition “Chevrolet and Bowtie” logo
  • Fits Holley 4150 and 4160 and other carburetors with 5.125” diameter neck
  • Die-cast aluminum lid construction
Out of Stock
C$400.99Was C$437.08 Save 8%
View
Out of Stock
C$2,762.99Was C$3,011.66 Save 8%
View
HYDRAMAT (3X8) 19MM Offset
  • Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions
  • Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump
  • Can be folded and compressed for easy installation through a variety of fuel cell openings
Out of Stock
C$239.99Was C$261.59 Save 8%
View
Marine Fuel Line
  • Genuine Holley Quality Parts
Out of Stock
C$198.99Was C$216.90 Save 8%
View
Marine Renew Kit
  • Contains all parts and gaskets necessary to restore your marine carburetor to like new performance
  • Detailed instructions included
Out of Stock
C$118.99Was C$129.70 Save 8%
View
PEX Intake - B9 2.0T for Audi
  • Turbo spool faster
  • Incredible value
  • Emissions friendly
Out of Stock
C$702.99Was C$766.26 Save 8%
View
Power Steering Add-on System for LT4 Wet Sump Engines
  • Add-on power steering to the OE GM accessory drive systems
  • P/S hard line adapters included
  • Available LT4/5 dry-sump & LT4 wet-sump applications
Out of Stock
C$2,560.99Was C$2,791.48 Save 8%
View
Regulator Rebuild Kit
  • Fuel Pressure regulator rebuild kit for Holley 12-846, and 12846ERL regulators
  • Includes diaphragm and spring
Out of Stock
C$99.99Was C$108.99 Save 8%
View
Regulator Rebuild Kit
  • Fuel Pressure regulator rebuild kit for Holley 12-848 & 12848ERL regulators
  • Includes diaphragm and spring
Out of Stock
C$103.99Was C$113.35 Save 8%
View
Regulator Rebuild Kit
  • Fuel Pressure regulator rebuild kit for Holley 12-879 and 12-880 regulator
  • Includes diaphragm and spring
Out of Stock
C$106.99Was C$116.62 Save 8%
View
Renew Kit Carburetor Rebuild Kit
  • Step-By-Step Instructions
  • Detailed Tuning Guide
  • Competitively Priced
Out of Stock
C$119.99Was C$130.79 Save 8%
View
Replacement Fuel Bowl Kit
  • Side-hung-float style with provision for transfer tube and accelerator pump
  • Used on model 4160 carburetors
  • accepts the adjustable-style needle and seat assembly
Out of Stock
C$104.99Was C$114.44 Save 8%
View
Replacement Main Body
  • Main bodies are factory assembled and kit includes new gaskets to complete the installation
  • Simple installation with common hand tools that you already have in your shop
  • Main bodies are available for our most popular carburetor models
Out of Stock
C$426.99Was C$465.42 Save 8%
View
SPE-2435 Throttle Cable & Bracket Kit
  • Includes universal throttle bracket
  • Fully adjustable throttle bracket
  • 3 foot long throttle cable
Out of Stock
C$122.99Was C$134.06 Save 8%
View
Tensioner Assembly
  • Genuine Holley Quality Parts
Out of Stock
C$1,024.99Was C$1,117.24 Save 8%
View
Timing Cover - Ford 7.3L Godzilla - Natural
  • Direct replacement for Holley Godzilla accessory drive
  • Cast aluminum
  • Designed with OE-like fitment in mind
Out of Stock
C$512.99Was C$559.16 Save 8%
View
Ultra XP Carburetor for 578 vehicles
  • Aluminum Construction (saves 4.5 lbs - 38% weight savings)
  • Mechanical Secondaries for perfect off the line launches
  • Includes notched float and jet extensions
Out of Stock
C$2,219.99Was C$2,419.79 Save 8%
View
Vintage Finned Valve Cover - "Holley" Script for Chevrolet, GMC and Pontiac
  • Designed to fit all Small Block Chevy applications with center bolt style cylinder heads – polished mounting hardware…
  • Die-cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and…
  • Emissions compliant valve covers include pre-installed internal oil baffles as well as an oil fill plug and PCV grommet
Out of Stock
C$472.99Was C$515.56 Save 8%
View
Windage Tray - Ford 7.3L Godzilla
  • Used with Holley Godzilla Oil Pan from Accessory Drive Kits 20-320, 20-320BK, 20-340, and 20-340BK
Out of Stock
C$95.99Was C$104.63 Save 8%
View
1150 CFM Gen 3 Ultra Dominator Carburetor
  • Designed for use on Drag race, Pro Street, or any high horsepower engines
  • Calibrations optimized for today's larger race engines and new fuels
  • Contoured hex head squirter screws for streamlined airflow
Out of Stock
C$2,506.99Was C$2,732.62 Save 8%
View
14" Round Finned Air Cleaner
  • 14” diameter, die-cast aluminum construction
  • Black finish w/ 3" paper element
  • Includes carburetor gasket and all mounting hardware necessary for installation
Out of Stock
C$360.99Was C$393.48 Save 8%
View
30" x 14" HydraMat®, Rectangle
  • Works with Alcohol, Ethanol, Methanol, and E-85 fuels
  • Works with 2-cycle oil blends as high as 20:1
  • Not for use with diesel fuels
Out of Stock
C$2,000.99Was C$2,181.08 Save 8%
View
350 CFM Performance 2BBL Carburetor
  • Manual (Cable driven, hand operated) choke for precise cold start control
  • 30cc accelerator pump for additional fuel under initial acceleration
  • Power valve blow-out protection
Out of Stock
C$1,179.99Was C$1,286.19 Save 8%
View
Air Cleaner 14" Black
  • Traditional Look open element style
  • Black painted finish
  • Holley logo stamped into the top
Out of Stock
C$148.99Was C$162.40 Save 8%
View
Double Adjustable Fuel Regulator
  • Individual adjustment settings, one for idle and wide open throttle.
  • Fuel pressure adjustability at idle can help prevent flooding at low rpms
  • Alcohol and E85 compatible.
Out of Stock
C$366.99Was C$400.02 Save 8%
View
ECU and Electronics Kit, Pro Flo4, Chevy SB/BB
  • Economical EFI System solution for Chevrolet SB and BB Engines with existing EFI Manifold Assembly
  • Simplified installation, providing all existing features of Pro Flo 4 EFI
  • Alternative for complete Pro Flo 4 EFI System
Out of Stock
C$2,176.99Was C$2,372.92 Save 8%
View
Equipped Billet Fuel Cell Cap
  • Features 4.438'' diameter flange
  • Large 3'' opening
  • Stainless steel hardware included
Out of Stock
C$247.99Was C$270.31 Save 8%
View
Flexible In Tank Fuel Line
  • 10MM ID
  • 180MM Long
  • Compatible for all fuel types
Out of Stock
C$9.99Was C$10.89 Save 8%
View
Fuel Filter
  • Bi-Directional Filters
  • Made Of Billet Aluminum
  • Sintered-Bronze 40 Micron Element
Out of Stock
C$14.99Was C$16.34 Save 8%
View
Fuel Pressure Gauge
  • 1.5 in. Diameter
  • Chromed Steel Case
  • Includes Elbow Fitting
Out of Stock
C$130.99Was C$142.78 Save 8%
View
Fuel Supply System
  • Includes Edelbrock Electric Fuel Pump PN" "1792" "
  • Includes Edelbrock Fuel Pressure Regulator PN" "1727
Out of Stock
C$1,358.99Was C$1,481.30 Save 8%
View
HP Copper Spark Plug
  • Copper dissipates heat much better than other materials
  • C" - Cut Design un-shrouds the spark kernel for a better burn
  • Machine rolled threads for precise thread engagement
Out of Stock
C$83.99Was C$91.55 Save 8%
View
HYDRAMAT (3X15) RECT - 19MM OUTLET OFFSET
  • Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions
  • Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump
  • Can be folded and compressed for easy installation through a variety of fuel cell openings
Out of Stock
C$454.99Was C$495.94 Save 8%
View