Trade prices for dealers.

0

Engine: 169,508 Results

In stock
89-95 Yamaha FZR1000 3.260 Bore Head Gasket
  • Conforms load distribution across the sealing area
  • No sealants or re-torque required
  • Creates less bore distortion
Out of Stock
C$68.99Was C$75.20 Save 8%
View
89-95 Yamaha FZR1000 76.5mm Gasket Kit
  • All of Cometic's gaskets and seals have been tested on both the street and the track as well as vigorous Dyno shakedowns
Out of Stock
C$145.99Was C$159.13 Save 8%
View
89-95 Yamaha FZR1000 78mm Gasket Kit
  • All of Cometic's gaskets and seals have been tested on both the street and the track as well as vigorous Dyno shakedowns
Out of Stock
C$185.99Was C$202.73 Save 8%
View
89-97 Polaris 500 Indy 73.5mm Complete Gasket Set
  • All of Cometic's gaskets and seals have been tested on both the street and the track as well as vigorous Dyno shakedowns
Out of Stock
C$133.99Was C$146.05 Save 8%
View
89-97 Yamaha FZR400 2.565 Bore Head Gasket
  • Conforms load distribution across the sealing area
  • No sealants or re-torque required
  • Creates less bore distortion
Out of Stock
C$72.99Was C$79.56 Save 8%
View
89-97 Yamaha FZR400 58mm .010 Gasket Kit
  • All of Cometic's gaskets and seals have been tested on both the street and the track as well as vigorous Dyno shakedowns
Out of Stock
C$145.99Was C$159.13 Save 8%
View
89-98 BMW M5/320i/520i 81mm Bore .040 inch MLS Head Gasket
  • The center or shim layer is an uncoated stainless steel layer which can be varied to accommodate multiple thickness…
  • Requires less clamp load creating less bore distortion
  • Conforms load distribution across the sealing area
Out of Stock
C$419.00Was C$456.71 Save 8%
View
89 ProLite 2244CS Piston Kit for 1989 Yamaha YZ125
  • Designed and built for each specific 2-stroke powersports engine
  • Includes high-quality piston ring(s), wrist pin(s), and circlips
  • Engineered, forged, and machined in the USA in Mentor, OH
Out of Stock
C$289.00Was C$315.01 Save 8%
View
8x8 748cc Drive G-Force CVT Belt for Argo
  • High tensile aramid cord maximizes acceleration, shock load resistance, and extreme fatigue resistance; great for…
  • Improved durability, crack & wear-resistance provides up to 2x the life of the original G-Force Belt
  • Not for use in turbocharged or heavily modified engine applications
Out of Stock
C$359.00Was C$391.31 Save 8%
View
90-00 Kawasaki ZX11 78mm Bore .018 MLS Head Gasket
  • The center or shim layer is an uncoated stainless steel layer which can be varied to accommodate multiple thickness…
  • Requires less clamp load creating less bore distortion
  • Conforms load distribution across the sealing area
Out of Stock
C$199.99Was C$217.99 Save 8%
View
90-00 Kawasaki ZX11 D1 .010 Head Gasket
  • Conforms load distribution across the sealing area
  • No sealants or re-torque required
  • Creates less bore distortion
Out of Stock
C$68.99Was C$75.20 Save 8%
View
9005 PT-10 PermaTorque Engine Cylinder Head Gasket Set for 2000-2002 Mercury Cougar HS
  • STRONG AND DURABLE -- Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • PROPRIETARY COATING -- Nonstick anti-friction coating seals small surface scratches and imperfections
  • NO RETORQUE DESIGN -- Steel core helps eliminate the need for retorquing head bolts
Out of Stock
C$319.00Was C$347.71 Save 8%
View
9005 PT-1 PermaTorque Engine Cylinder Head Gasket for Ford, Mercury and Mazda
  • UNIQUE COMBUSTION SEAL -- Accommodates high cylinder pressures and head movement encountered with engines
  • PROPRIETARY COATING -- Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
  • SUPERIOR SEAL -- Precise embossed sealing beads at all vital areas to eliminate leak paths
Out of Stock
C$97.99Was C$106.81 Save 8%
View
9005 PT-8 PermaTorque Engine Cylinder Head Gasket Set for 2004 Ford Focus HS
  • STRONG AND DURABLE -- Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • PROPRIETARY COATING -- Nonstick anti-friction coating seals small surface scratches and imperfections
  • NO RETORQUE DESIGN -- Steel core helps eliminate the need for retorquing head bolts
Out of Stock
C$279.00Was C$304.11 Save 8%
View
9005 PT PermaTorque Engine Cylinder Head Gasket for Ford, Mercury and Mazda
  • UNIQUE COMBUSTION SEAL -- Accommodates high cylinder pressures and head movement encountered with engines
  • PROPRIETARY COATING -- Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
  • SUPERIOR SEAL -- Precise embossed sealing beads at all vital areas to eliminate leak paths
Out of Stock
C$102.99Was C$112.26 Save 8%
View
900ACE EXP./REN/Touring OEM42089 Piston Kit for Ski-Doo
  • Dedicated forgings allow for optimized strength-to-weight ratio
  • Includes high-quality piston rings, wrist pin(s), and circlips
  • Engineered, forged, and machined in the USA in Mentor, OH
Out of Stock
C$359.00Was C$391.31 Save 8%
View
9014 PT PermaTorque Engine Cylinder Head Gasket for Pontiac, Buick and Oldsmobile
  • STRONG AND DURABLE -- Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • PROPRIETARY COATING -- Nonstick anti-friction coating seals small surface scratches and imperfections
  • NO RETORQUE DESIGN -- Steel core helps eliminate the need for retorquing head bolts
Out of Stock
C$58.99Was C$64.30 Save 8%
View
9036 PT PermaTorque Engine Cylinder Head Gasket for Dodge, Plymouth and Chrysler
  • UNIQUE COMBUSTION SEAL -- Accommodates high cylinder pressures and head movement encountered with engines
  • PROPRIETARY COATING -- Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
  • SUPERIOR SEAL -- Precise embossed sealing beads at all vital areas to eliminate leak paths
Out of Stock
C$98.99Was C$107.90 Save 8%
View
9038 PT PermaTorque Engine Cylinder Head Gasket for Mercury, Ford and Mazda
  • UNIQUE COMBUSTION SEAL -- Accommodates high cylinder pressures and head movement encountered with engines
  • PROPRIETARY COATING -- Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
  • SUPERIOR SEAL -- Precise embossed sealing beads at all vital areas to eliminate leak paths
Out of Stock
C$125.99Was C$137.33 Save 8%
View
9039 PT PermaTorque Engine Cylinder Head Gasket for Mercury, Ford and Mazda
  • UNIQUE COMBUSTION SEAL -- Accommodates high cylinder pressures and head movement encountered with engines
  • PROPRIETARY COATING -- Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
  • SUPERIOR SEAL -- Precise embossed sealing beads at all vital areas to eliminate leak paths
Out of Stock
C$124.99Was C$136.24 Save 8%
View
904cc Diesel Drive G-Force RedLine CVT Belt for Polaris
  • Optimized, patented Ethylene Elastomeric (EE) compound maximizes axial stiffness enabling belts to run at higher…
  • Tested under extreme conditions in controlled environments as well as on race vehicles
  • Greater heat resistance and recovery, even under severe duty cycles
Out of Stock
C$299.00Was C$325.91 Save 8%
View
904cc Diesel G-Force CVT Drive Belt for Polaris
  • Advanced aramid tensile cords and reinforced fiber-loaded undercord for durability and dependability
  • Flexible, high-performance materials enable grab-and-go mobility and responsive acceleration
  • Tested under extreme conditions in controlled environments as well as on race vehicles
Out of Stock
C$239.00Was C$260.51 Save 8%
View
9059 PT PermaTorque Engine Cylinder Head Gasket for Chevrolet, Pontiac and Oldsmobile
  • SUPERIOR SEAL -- Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
  • PROPRIETARY COATING -- Nonstick anti-friction coating seals small surface imperfections
  • NO RETORQUE DESIGN -- Steel core helps eliminate the need for retorquing head bolts
Out of Stock
C$52.99Was C$57.76 Save 8%
View
9071 PT PermaTorque Engine Cylinder Head Gasket for 13 vehicles
  • STRONG AND DURABLE -- Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • PROPRIETARY COATING -- Nonstick anti-friction coating seals small surface scratches and imperfections
  • NO RETORQUE DESIGN -- Steel core helps eliminate the need for retorquing head bolts
Out of Stock
C$66.99Was C$73.02 Save 8%
View
9071 PT PermaTorque Engine Cylinder Head Gasket Set for Pontiac, Chevrolet and Oldsmobile
  • STRONG AND DURABLE -- Severe duty steel core gaskets designed slightly thicker to accommodate for machined surfaces
  • DESIGNED FOR THE TOUGHEST CONDITIONS -- Engineered for hardworking vehicles that operate in severe conditions
  • SUPERIOR SEAL -- Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
Out of Stock
C$329.00Was C$358.61 Save 8%
View
90738 Engine Intake Manifold Gasket Set for 1981-1982 Toyota Corolla MS
  • ENGINEERING EXPERTISE -- Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous…
  • EVERY PART FOR THE REPAIR -- Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED -- Parts are tested on-vehicle and validated to ensure optimal performance on the road
Out of Stock
C$33.99Was C$37.05 Save 8%
View
9076 PT-1 PermaTorque Engine Cylinder Head Gasket for Jeep
  • STRONG AND DURABLE -- Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • PROPRIETARY COATING -- Nonstick anti-friction coating seals small surface scratches and imperfections
  • NO RETORQUE DESIGN -- Steel core helps eliminate the need for retorquing head bolts
Out of Stock
C$71.99Was C$78.47 Save 8%
View
90812 Fuel Injection Plenum Gasket Set for 1999-2003 Ford Windstar MS
  • ENGINEERING EXPERTISE -- Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous…
  • EVERY PART FOR THE REPAIR -- Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED -- Parts are tested on-vehicle and validated to ensure optimal performance on the road
Out of Stock
C$78.99Was C$86.10 Save 8%
View
9085 PT PermaTorque Engine Cylinder Head Gasket Set for 1994-1996 Chevrolet Caprice HS
  • STRONG AND DURABLE -- Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • PROPRIETARY COATING -- Nonstick anti-friction coating seals small surface scratches and imperfections
  • NO RETORQUE DESIGN -- Steel core helps eliminate the need for retorquing head bolts
Out of Stock
C$279.00Was C$304.11 Save 8%
View
9090 PT PermaTorque Engine Cylinder Head Gasket for Volkswagen and Audi
  • SUPERIOR SEAL -- Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
  • PROPRIETARY COATING -- Nonstick anti-friction coating seals small surface imperfections
  • NO RETORQUE DESIGN -- Steel core helps eliminate the need for retorquing head bolts
Out of Stock
C$89.99Was C$98.09 Save 8%
View
90-94 Honda VFR750F 72mm Bore .043 Head Gasket
  • Conforms load distribution across the sealing area
  • No sealants or re-torque required
  • Creates less bore distortion
Out of Stock
C$94.99Was C$103.54 Save 8%
View
90-94 Nissan SR20DET AWD 87mm Bore .045in MLS Cylinder Head Gasket
  • The center or shim layer is an uncoated stainless steel layer which can be varied to accommodate multiple thickness…
  • Requires less clamp load creating less bore distortion
  • Conforms load distribution across the sealing area
Out of Stock
C$209.00Was C$227.81 Save 8%
View
90-94 Nissan SR20DET AWD 88mm Bore .045in MLS Cylinder Head Gasket
  • The center or shim layer is an uncoated stainless steel layer which can be varied to accommodate multiple thickness…
  • Requires less clamp load creating less bore distortion
  • Conforms load distribution across the sealing area
Out of Stock
C$209.00Was C$227.81 Save 8%
View
90-95 Nissan VG30DE .060in AFM Intake Manifold Gasket
  • AFM material has an 85 percent recovery while maintaining strong torque retention
  • AFM material has a temperature resistance of over 205 Degrees Fahrenheit
  • AFM does not require sealants or re-torquing
Out of Stock
C$41.99Was C$45.77 Save 8%
View
90-97 Kawasaki ZX11 .018 Head Gasket
  • Conforms load distribution across the sealing area
  • No sealants or re-torque required
  • Creates less bore distortion
Out of Stock
C$199.99Was C$217.99 Save 8%
View
90-97 Kawasaki ZX11 .030 Head Gasket
  • Conforms load distribution across the sealing area
  • No sealants or re-torque required
  • Creates less bore distortion
Out of Stock
C$145.99Was C$159.13 Save 8%
View
90-97 Kawasaki ZX11 76mm Bore .030 Head Gasket
  • Conforms load distribution across the sealing area
  • No sealants or re-torque required
  • Creates less bore distortion
Out of Stock
C$145.99Was C$159.13 Save 8%
View