Trade prices for dealers.

0

Engine: 169,504 Results

In stock
Out of Stock
C$80.99Was C$88.28 Save 8%
View
Power Steering Add-on System for LT4 Wet Sump Engines
  • Add-on power steering to the OE GM accessory drive systems
  • P/S hard line adapters included
  • Available LT4/5 dry-sump & LT4 wet-sump applications
Out of Stock
C$2,731.99Was C$2,977.87 Save 8%
View
Valve Covers - Muscle Series - Finned - SBC - Factory Orange
  • Designed to fit all 1958-86 Small Block Chevy engines with perimeter bolt patterns
  • Standard height valve cover with pre-installed internal oil baffles
  • Factory style twist-in oil fill cap, round Holley emblem, and square oil fill and PCV grommets included
Out of Stock
C$681.99Was C$743.37 Save 8%
View
VR1 Series Brushless Fuel Pump w/Controller Quick Kit
  • High flow and high pressure with low amperage draw
  • Designed to be submerged in your fuel cell for a clean installation
  • Maximum amp draw of the VR1 is 19 AMPS and 38 AMPS for the VR2
Out of Stock
C$1,707.99Was C$1,861.71 Save 8%
View
Out of Stock
C$27.99Was C$30.51 Save 8%
View
Out of Stock
C$375.99Was C$409.83 Save 8%
View
Fuel Hose Kit
  • Billet Construction
  • Flows Up To 130 Gallons Per Hour
  • Supplied w/.1250 in. NPT Female Port
Out of Stock
C$193.99Was C$211.45 Save 8%
View
Pro Flo 4 EFI ECU and Electronics Kit for Ford 351 Windsor Engines
  • Economical EFI System solution for Ford 351W users with existing EFI components Simplified installation, providing all…
  • Simplified installation, providing all existing features of Pro Flo 4 EFI
Out of Stock
C$2,197.99Was C$2,395.81 Save 8%
View
RZR Replacement Pre-Filter Kit
  • Direct Replacement
  • Ensures pump does not become contaminated with debris from fuel tank
  • Designed to clamp directly into pump inlet
Out of Stock
C$37.99Was C$41.41 Save 8%
View
Out of Stock
C$21.99Was C$23.97 Save 8%
View
Xtreme Energy DLC Hydraulic Flat Tappet Lifters for AMC & Chrysler Applications .904 Diameter - Single
  • Validated through rigorous endurance and load-cycle testing, these lifters are engineered with geometry and…
  • Delivers sustained, high-stability performance under race-level thermal and mechanical loads.
  • Fully compatible with all cast-iron and steel camshafts, ensuring stable surface interaction, controlled contact stress…
Out of Stock
C$15.99Was C$17.43 Save 8%
View
Xtreme Energy DLC Solid Flat Tappet Lifters for AMC & Chrysler Applications (No Oil Band, No PR Oiling) .904 Diameter - Set of 12
  • Validated through rigorous endurance and load-cycle testing, these lifters are engineered with geometry and…
  • Delivers sustained, high-stability performance under race-level thermal and mechanical loads.
  • Fully compatible with all cast-iron and steel camshafts, ensuring stable surface interaction, controlled contact stress…
Out of Stock
C$253.99Was C$276.85 Save 8%
View
Fuel Hose Kit
  • Billet Construction
  • Flows Up To 130 Gallons Per Hour
  • Supplied w/.1250 in. NPT Female Port
Out of Stock
C$157.99Was C$172.21 Save 8%
View
Fuel Hose Kit
  • Designed For 600/660 Series Carbs
  • Includes A Balanced Flow Fuel Block
  • Includes Four Full Flow Hose Ends
Out of Stock
C$104.99Was C$114.44 Save 8%
View
Out of Stock
C$2,994.99Was C$3,264.54 Save 8%
View
Perf RPM, Big Block, CNC Chamber, Hyd Roller for 83 vehicles
  • Large 230cc Intake ports for maximum flow from an "as-cast" port
  • CNC combustion chambers for cylinder-to-cylinder consistency and performance
  • Assembled with spring set for Hydraulic Roller Camshafts
Out of Stock
C$1,945.99Was C$2,121.13 Save 8%
View
Fuel Injector - 15 lb/hr for 45 vehicles
  • Provides precise control of fuel delivery & atomization for improved throttle response
  • All new units; not modified stock units or remanufactured from used cores
  • Operates at higher fuel pressures without loss of metering control
Out of Stock
C$165.99Was C$180.93 Save 8%
View