Trade prices for dealers.

0

Engine: 169,504 Results

In stock
Flexible In Tank Fuel Line
  • 8MM ID
  • 284MM Long
  • Compatible for all fuel types
Out of Stock
C$11.99Was C$13.07 Save 8%
View
Fuel Line
  • Genuine Holley Quality Parts
Out of Stock
C$330.99Was C$360.78 Save 8%
View
Fuel Line Kit - 3X2 Carb set-up
  • Specifically designed for 3X2 Carburetor Set-ups
Out of Stock
C$369.99Was C$403.29 Save 8%
View
Fuel Pump Check Valve Kit
  • Check valve kit for 12-150 fuel pump
  • Includes lower gasket, check valve, spring and inlet screen filter
Out of Stock
C$83.99Was C$91.55 Save 8%
View
GEN V COIL SPACERS
  • .575" Height
  • Great for turbo builds or other applications where more ignition coil clearance is needed!
Out of Stock
C$19.99Was C$21.79 Save 8%
View
LS COOLING MANIFOLD BLACK
  • Genuine Holley Quality Parts
Out of Stock
C$832.99Was C$907.96 Save 8%
View
15" x 15" HydraMat®, Cross
  • Works with Alcohol, Ethanol, Methanol, and E85 fuels.
  • Works with 2-cycle oil blends as high as 20:1
  • Not for use with diesel fuels
Out of Stock
C$832.99Was C$907.96 Save 8%
View
Carburetor Adapter Plate
  • Cast aluminum
  • Can also be used in reverse
  • Will allow any 4150 or 4160 carburetor to be mounted on manifolds designed originally for Rochester Quadra-Jet or Carter…
Out of Stock
C$189.99Was C$207.09 Save 8%
View
CARBURETOR LINKAGE KIT FOR 3X2 SBC
  • Specifically designed for 3X2 Carburetor set-up
  • Kit includes 2 linkage arms, 2 nuts, 2 washers, and 2 cotter pins
Out of Stock
C$467.99Was C$510.11 Save 8%
View
Carburetor Throttle Cable Bracket
  • Kit Contains Bracket and Longer Carburetor Mounting Stud.
Out of Stock
C$106.99Was C$116.62 Save 8%
View
Cast Aluminum Timing Chain Cover
  • Accommodates both stock and aftermarket water pumps
  • Includes high quality gasket, corrosion resistant E-coated hardware, and dowel pins
  • Offered in Natural Cast and Satin Black finishes
Out of Stock
C$209.99Was C$228.89 Save 8%
View
Classic Double Pumper Carburetor for 578 vehicles
  • Optimized street/strip calibration that works out-of-the-box
  • Electric choke for precise cold start control
  • Mechanical secondaries for awesome tire turning performance
Out of Stock
C$1,579.99Was C$1,722.19 Save 8%
View
Equipped Billet Fill Cap
  • Steel weld bung
  • 0.675" Overall Height of Weld Bung
  • Thread 1-1/2"-12
Out of Stock
C$76.99Was C$83.92 Save 8%
View
Fuel Line
  • Rugged Billet Construction
  • AN fittings
  • Red and Blue Anodized
Out of Stock
C$360.99Was C$393.48 Save 8%
View
GEN I COIL SPACERS
  • .550" Height
  • Great for turbo builds or other applications where more ignition coil clearance is needed!
Out of Stock
C$16.99Was C$18.52 Save 8%
View
Idler Pulley
  • Genuine Holley Quality Parts
Out of Stock
C$148.99Was C$162.40 Save 8%
View
LS High-Mount A/C Accessory Drive Kit
  • INCLUDES THE FOLLOWING ITEMS
  • 20-134 - LS A/C BRACKET KIT PASSENGER SIDE
  • 97-151 - TENSIONER ASSM W/GROOVED PULLEY
Out of Stock
C$1,707.99Was C$1,861.71 Save 8%
View
Replacement Hardware Kit
  • Replacement Hardware for Gen III Hemi Mid-Mount Accessory Drive System
Out of Stock
C$102.99Was C$112.26 Save 8%
View
Timing Cover - Ford 7.3L Godzilla - Natural
  • Direct replacement for Holley Godzilla accessory drive
  • Cast aluminum
  • Designed with OE-like fitment in mind
Out of Stock
C$512.99Was C$559.16 Save 8%
View
4 Port VR Series Fuel Pressure Regulator
  • EFI regulators are adjustable from 40-100 PSI base pressure
  • Compatible with gasoline, methanol, and E85* (Compatible with
  • 1/8” NPT gauge port
Out of Stock
C$681.99Was C$743.37 Save 8%
View
Accelerator Pump Cover
  • Genuine Holley Quality Parts
Out of Stock
C$65.99Was C$71.93 Save 8%
View
Billet Regulator Bracket
  • Black anodized billet construction
  • Simplifies mounting Holley fuel pressure regulators
  • Included hardware for easy installation
Out of Stock
C$133.99Was C$146.05 Save 8%
View
Carburetor Throttle Shaft Conversion Kits
  • Kit Contains Primary & Secondary Throttle Shaft Assy. and eight Throttle Plate Mounting Screws.
Out of Stock
C$186.99Was C$203.82 Save 8%
View
Fuel Line
  • Increased fuel volume of each bowl extends length by .125” per bowl (.250” overall).
  • The fuel lines are 9.75” long (standard fuel line is 9.50”)
Out of Stock
C$448.99Was C$489.40 Save 8%
View
In-Tank RetroFit Fuel Module 525 LPH Return Style
  • Retrofit Fuel Module 525 LPH- Return Style
  • ¼” NPT ports for a wide variety of plumbing options
  • Optional roll over valve available
Out of Stock
C$1,706.99Was C$1,860.62 Save 8%
View
LS Valve Cover Adapter Plates for 64 vehicles
  • Constructed of Cast Aluminum
  • Available in three finishes (Natural Cast, Black Painted, and Polished Finish)
  • Allows installation of LS style valve covers onto Chevy small block engines
Out of Stock
C$496.99Was C$541.72 Save 8%
View
LS Water Pump-Upward Facing Inlet
  • Fits all LS engine blocks
  • Short upward facing water inlet
  • Works with long (truck type) belt spacing
Out of Stock
C$342.99Was C$373.86 Save 8%
View
LT COOLING MANIFOLD BLACK
  • Genuine Holley Quality Parts
Out of Stock
C$1,206.99Was C$1,315.62 Save 8%
View
Marine Carb Renew Kits
  • Contains all parts and gaskets necessary to restore your marine carburetor to like new performance
  • Detailed instructions included
Out of Stock
C$111.99Was C$122.07 Save 8%
View
SPE-4239 Wire Separators
  • Helps prevent burned plug wires
  • ABS construction
  • Made from high quality material
Out of Stock
C$5.99Was C$6.53 Save 8%
View
Ultra XP Carburetor for 578 vehicles
  • Aluminum Construction (saves 4.5 lbs - 38% weight savings)
  • Mechanical Secondaries for perfect off the line launches
  • Includes notched float and jet extensions
Out of Stock
C$2,219.99Was C$2,419.79 Save 8%
View
Float
  • Genuine Holley Quality Parts
Out of Stock
C$34.99Was C$38.14 Save 8%
View
190, 255, and 350 LPH FUEL PUMP - 10 ORB ADAPTER
  • Clamp-on 6160-T6 aluminum adapter attaches directly to fuel pump body with no modification
  • Patented design includes o-ring to seal the fuel pump to the adapter
  • Four sizes available to fit the 255, 340, and 455 lph pumps as well as the VR series pumps
Out of Stock
C$84.99Was C$92.64 Save 8%
View
Aluminum HP Main Body Retro-Fit Kit-750 CFM
  • Simple installation with common hand tools
  • Reduces turbulence and smooths air entry into the venturi
  • Eligible For Holley contingency programs
Out of Stock
C$457.99Was C$499.21 Save 8%
View
Fuel Cell EFI Pump Module Assembly
  • Update your fuel cell to EFI the easy way!
  • Designed to drop right into your existing 12 bolt flange fuel cell
  • Module with Dual 450 LPH fuel pumps configurations
Out of Stock
C$1,360.99Was C$1,483.48 Save 8%
View
FUEL CELL VENT KIT
  • Complete kit with 6 ft of 10AN Nylon Braided hose, all fittings, rollover valve, bulkhead and breather filter
Out of Stock
C$274.99Was C$299.74 Save 8%
View
Fuel Line
  • Rugged Billet Construction
  • AN fittings
  • Red and Blue Anodized
Out of Stock
C$422.99Was C$461.06 Save 8%
View
IN-LINE FUEL PULSE DAMPER
  • Fittings included for damper/regulator’s and direct mount dampers
  • Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
  • Assembled and tested in the USA
Out of Stock
C$288.99Was C$315.00 Save 8%
View
LS Valley Cover - Trussed for 52 vehicles
  • Precision manufactured from billet aluminum with a modern, race inspired, trussed design
  • Available for GM LS1/LS6 (10 bolt) and LS2/LS3/LS7/LSX (11 bolt) engine applications
  • All necessary gaskets and upgraded mounting hardware sold separately
Out of Stock
C$352.99Was C$384.76 Save 8%
View
LS Valley Cover - Trussed for 55 vehicles
  • Precision manufactured from billet aluminum with a modern, race inspired, trussed design
  • Available for GM LS1/LS6 (10 bolt) and LS2/LS3/LS7/LSX (11 bolt) engine applications
  • All necessary gaskets and upgraded mounting hardware sold separately
Out of Stock
C$411.99Was C$449.07 Save 8%
View
LS Valve Cover Adapter Plates for 64 vehicles
  • Constructed of Cast Aluminum
  • Available in three finishes (Natural Cast, Black Painted, and Polished Finish)
  • Allows installation of LS style valve covers onto Chevy small block engines
Out of Stock
C$343.99Was C$374.95 Save 8%
View
MANIFOLD-BRACKET KIT, LT4 WET-NATURAL
  • Cast aluminum water pump manifold used in LT4 kit 20-220
  • Genuine Holley Quality Parts
Out of Stock
C$747.99Was C$815.31 Save 8%
View
Oval Red Washable Gauze Filter
  • Replacement Oval Air Filter
  • Washable Red Gauze Element
Out of Stock
C$132.99Was C$144.96 Save 8%
View
Regulator Rebuild Kit
  • Fuel Pressure regulator rebuild kit for Holley 12-879 and 12-880 regulator
  • Includes diaphragm and spring
Out of Stock
C$106.99Was C$116.62 Save 8%
View
Replacement Hardware Kit
  • Genuine Holley Quality Parts
  • Replacement Hardware for GEN 3 Hemi Hi-Ram Manifolds
Out of Stock
C$97.99Was C$106.81 Save 8%
View
Vintage Finned Valve Cover - "Holley" Script for Chevrolet, GMC and Pontiac
  • Designed to fit all Small Block Chevy applications with center bolt style cylinder heads – polished mounting hardware…
  • Die-cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and…
  • Emissions compliant valve covers include pre-installed internal oil baffles as well as an oil fill plug and PCV grommet
Out of Stock
C$563.99Was C$614.75 Save 8%
View
Windage Tray - Ford 7.3L Godzilla
  • Used with Holley Godzilla Oil Pan from Accessory Drive Kits 20-320, 20-320BK, 20-340, and 20-340BK
Out of Stock
C$95.99Was C$104.63 Save 8%
View
Air Cleaner Replacement Element
  • Replacment "Filter" for Custom Air Cleaner Assembly 120-141
Out of Stock
C$93.99Was C$102.45 Save 8%
View
Base Gasket
  • 1 1/2" Primary
  • 2" Secondary
  • 1/4" Thick
Out of Stock
C$66.99Was C$73.02 Save 8%
View
Billet Regulator Bracket
  • Clear anodized billet construction
  • Simplifies mounting Holley fuel pressure regulators
  • Included hardware for easy installation
Out of Stock
C$130.99Was C$142.78 Save 8%
View
DIRECT MOUNT FUEL PULSE DAMPER
  • Fittings included for damper/regulator’s and direct mount dampers
  • Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
  • Assembled and tested in the USA
Out of Stock
C$220.99Was C$240.88 Save 8%
View
Flexible In Tank Fuel Line
  • 10MM ID
  • 80MM Long
  • Compatible for all fuel types
Out of Stock
C$8.99Was C$9.80 Save 8%
View
Fuel Filter Element and O-ring Kit
  • Replacement filter element for 100 GPH Holley billet fuel filter
  • Includes 40 micron stainless steel woven mesh filter element and O-rings
Out of Stock
C$29.99Was C$32.69 Save 8%
View
Fuel Rail Kit
  • Genuine Holley Quality Parts
  • 6AN Fuel Rails
Out of Stock
C$257.99Was C$281.21 Save 8%
View
LS Valley Cover - Trussed for 55 vehicles
  • Precision manufactured from billet aluminum with a modern, race inspired, trussed design
  • Available for GM LS1/LS6 (10 bolt) and LS2/LS3/LS7/LSX (11 bolt) engine applications
  • All necessary gaskets and upgraded mounting hardware sold separately
Out of Stock
C$359.99Was C$392.39 Save 8%
View
Out of Stock
C$499.99Was C$544.99 Save 8%
View
Mid-Rise Plenum Base Adapter Kit - Black
  • Great for supercharged or turbocharged engines
  • Power band from 1500-6500 rpm
  • Cast aluminum construction
Out of Stock
C$567.99Was C$619.11 Save 8%
View
Renew Kit Carburetor Rebuild Kit
  • Step-By-Step Instructions
  • Detailed Tuning Guide
  • Competitively Priced
Out of Stock
C$119.99Was C$130.79 Save 8%
View
Stealthram Gasket
  • 2 Per Package
Out of Stock
C$70.99Was C$77.38 Save 8%
View
Tensioner Assembly
  • Genuine Holley Quality Parts
Out of Stock
C$1,024.99Was C$1,117.24 Save 8%
View
Vintage Finned Valve Cover - "Holley" Script for Chevrolet, GMC and Pontiac
  • Designed to fit all Small Block Chevy applications with center bolt style cylinder heads – polished mounting hardware…
  • Die-cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and…
  • Emissions compliant valve covers include pre-installed internal oil baffles as well as an oil fill plug and PCV grommet
Out of Stock
C$472.99Was C$515.56 Save 8%
View
Vintage Series GM Licensed Air Cleaner - Polished
  • 14” diameter die-cast aluminum construction with finned design and an iconic Chevy “Bowtie” logo
  • Available with replacement paper filter or reusable cotton gauze (red) style air filter elements
  • Includes stamped steel color matched SureFlo style base with knock out provisions for fresh air adapter
Out of Stock
C$427.99Was C$466.51 Save 8%
View