Trade prices for dealers.

0

Engine: 113,105 Results

In stock
V8 .094in Fiber Valve Cover Gasket for 21 vehicles
  • It has excellent sealability in a variety of environments and flange conditions
  • Fully cured nitrile butadiene rubber binder for maximum fluid resistance
  • Withstands High Vacuum Environments
Out of Stock
C$60.99Was C$66.48 Save 8%
View
V8 .125in Cork Oil Pan Gasket for Ford, Mercury and Toyota
  • All of Cometic's gaskets and seals have been tested on both the street and the track as well as vigorous Dyno shakedowns
  • Designed To Seal The Oil Pan To Engine Block
Out of Stock
C$60.99Was C$66.48 Save 8%
View
V8 .188in Fiber Valve Cover Gasket for Ford, Mercury and Edsel
  • It has excellent sealability in a variety of environments and flange conditions
  • Fully cured nitrile butadiene rubber binder for maximum fluid resistance
  • Steel Torque Limiting Frame
Out of Stock
C$59.99Was C$65.39 Save 8%
View
V8 .188in Fiber Valve Cover Gasket Set for Ford, Mercury and Edsel
  • It has excellent sealability in a variety of environments and flange conditions
  • Fully cured nitrile butadiene rubber binder for maximum fluid resistance
  • Provides Excellent Seal Between The Timing Cover And Block
Out of Stock
C$93.99Was C$102.45 Save 8%
View
V8 2 Piece Rear Main Seal for Ford and Mercury
  • All of Cometic's gaskets and seals have been tested on both the street and the track as well as vigorous Dyno shakedowns
  • Meets Or Exceeds OEM Quality
Out of Stock
C$66.99Was C$73.02 Save 8%
View
V8 4.0L Serpentine Belt Kit for 1995-1997 Lexus LS400
  • NOTE: Kit contents vary depending on specific needs of vehicle kit application
  • Designed for convenience, easy parts sourcing and reduced customer comebacks
  • Meets or exceeds OE standards in form, function and fit
Out of Stock
C$799.00Was C$870.91 Save 8%
View
V-8 4.1L Fan A.P. High Capacity V-Belt (Standard) for Cadillac
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
Out of Stock
C$67.99Was C$74.11 Save 8%
View
V8-4.1L Micro-V Belts 6 Ribs for Polaris and INFINITI
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • EPDM rubber constructions resist cracking on the rib surface
  • Tensioner Replacement is Recommended (if equipped)
Out of Stock
C$82.99Was C$90.46 Save 8%
View
V-8 425 Fan Alt. High Capacity V-Belt (Standard) for 293 vehicles
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
Out of Stock
C$65.99Was C$71.93 Save 8%
View
V-8 425 P.S. A.C. High Capacity V-Belt (Standard) for Cadillac
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
Out of Stock
C$55.99Was C$61.03 Save 8%
View
V-8 425 P.S. To A.P. High Capacity V-Belt (Standard) for Buick
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
Out of Stock
C$40.99Was C$44.68 Save 8%
View
V-8 4.2L Cam. Belt Automotive Timing Belt for Audi
  • High-grade HNBR rubber for superior heat and contamination resistance
  • PTFE-infused jackets to reduce frictional losses and tooth shear
  • Premium tensile members providing maximum strength
Out of Stock
C$123.99Was C$135.15 Save 8%
View
V-8 4.5L P.S. Belt Drive Tensioner for INFINITI
  • Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
  • Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
  • Torsional round spring design provides reliability as well as consistent tension
Out of Stock
C$779.00Was C$849.11 Save 8%
View
V-8 4.6L Accessory Drive Belt Drive Tensioner for 8 vehicles
  • Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
  • Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
  • Torsional round spring design provides reliability as well as consistent tension
Out of Stock
C$192.99Was C$210.36 Save 8%
View
V8 4.6L Micro-V Belts for Ford, Lincoln and Mercury
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • EPDM rubber constructions resist cracking on the rib surface
  • Tensioner Replacement is Recommended (if equipped)
Out of Stock
C$144.99Was C$158.04 Save 8%
View
V8 4.6L Serpentine Belt Kit for 2003-2004 Ford Mustang
  • NOTE: Kit contents vary depending on specific needs of vehicle kit application
  • Designed for convenience, easy parts sourcing and reduced customer comebacks
  • Meets or exceeds OE standards in form, function and fit
Out of Stock
C$329.00Was C$358.61 Save 8%
View
V8 4.6L Serpentine Belt Kit for Cadillac and Oldsmobile
  • NOTE: Kit contents vary depending on specific needs of vehicle kit application
  • Designed for convenience, easy parts sourcing and reduced customer comebacks
  • Meets or exceeds OE standards in form, function and fit
Out of Stock
C$329.00Was C$358.61 Save 8%
View
V8 4.6L Serpentine Belt Kit for Cadillac, Oldsmobile and Pontiac
  • NOTE: Kit contents vary depending on specific needs of vehicle kit application
  • Designed for convenience, easy parts sourcing and reduced customer comebacks
  • Meets or exceeds OE standards in form, function and fit
Out of Stock
C$399.00Was C$434.91 Save 8%
View
V8 4.6L Serpentine Belt Kit for Ford, Lincoln and Mercury
  • NOTE: Kit contents vary depending on specific needs of vehicle kit application
  • Designed for convenience, easy parts sourcing and reduced customer comebacks
  • Meets or exceeds OE standards in form, function and fit
Out of Stock
C$269.00Was C$293.21 Save 8%
View
V8 4.6L Serpentine Belt Kit for Ford, Lincoln and Mercury
  • NOTE: Kit contents vary depending on specific needs of vehicle kit application
  • Designed for convenience, easy parts sourcing and reduced customer comebacks
  • Meets or exceeds OE standards in form, function and fit
Out of Stock
C$319.00Was C$347.71 Save 8%
View
V-8 4.6L Serpentine Micro-V Belt for 48 vehicles
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • EPDM rubber constructions resist cracking on the rib surface
  • Tensioner Replacement is Recommended (if equipped)
Out of Stock
C$107.99Was C$117.71 Save 8%
View
V-8 4.6L Tensioner Assy. Belt Drive Tensioner for 1995-2002 Lincoln Continental
  • Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
  • Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
  • Torsional round spring design provides reliability as well as consistent tension
Out of Stock
C$309.00Was C$336.81 Save 8%
View
V-8 4.6L Tensioner Assy. Belt Drive Tensioner for Genesis, Hyundai and Kia
  • Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
  • Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
  • Torsional round spring design provides reliability as well as consistent tension
Out of Stock
C$529.00Was C$576.61 Save 8%
View
V-8 4.6L Tensioner Assy. Belt Drive Tensioner for Mercedes-Benz
  • Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
  • Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
  • Torsional round spring design provides reliability as well as consistent tension
Out of Stock
C$619.00Was C$674.71 Save 8%
View
V-8 4.6L Water Pump Belt Drive Tensioner for 7 vehicles
  • Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
  • Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
  • Torsional round spring design provides reliability as well as consistent tension
Out of Stock
C$199.00Was C$216.91 Save 8%
View
V-8 4.6L Water Pump Standard V-Ribbed Belt for 11 vehicles
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • EPDM rubber constructions resist cracking on the rib surface
  • Tensioner Replacement is Recommended (if equipped)
Out of Stock
C$47.99Was C$52.31 Save 8%
View
V-8 4.6L Water Pump Standard V-Ribbed Belt for Cadillac
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • EPDM rubber constructions resist cracking on the rib surface
  • Tensioner Replacement is Recommended (if equipped)
Out of Stock
C$48.99Was C$53.40 Save 8%
View
V-8 472 P.S. A.C. High Capacity V-Belt (Standard) for 65 vehicles
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
Out of Stock
C$57.99Was C$63.21 Save 8%
View
V8 4.7L Serpentine Belt Kit for 2008-2009 Mercedes-Benz GL450
  • NOTE: Kit contents vary depending on specific needs of vehicle kit application
  • Designed for convenience, easy parts sourcing and reduced customer comebacks
  • Meets or exceeds OE standards in form, function and fit
Out of Stock
C$399.00Was C$434.91 Save 8%
View
V-8 4.7L Serpentine Standard V-Ribbed Belt for 17 vehicles
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • EPDM rubber constructions resist cracking on the rib surface
  • Tensioner Replacement is Recommended (if equipped)
Out of Stock
C$79.99Was C$87.19 Save 8%
View
V-8 4.7L Tensioner Assy. Belt Drive Tensioner for Lexus and Toyota
  • Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
  • Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
  • Torsional round spring design provides reliability as well as consistent tension
Out of Stock
C$143.99Was C$156.95 Save 8%
View
V-8 4.8L A.C. Stretch Fit V-Ribbed Belt for BMW
  • Gates engineered tensile cord has the needed combination of strength and flexibility using advanced polyamide tensile…
  • Patented highly engineered EPDM belt ribs are extremely resistant to contamination, wear and pilling
  • NOTE: Stretch Fit belts are single-use only and must be replaced if removed
Out of Stock
C$48.99Was C$53.40 Save 8%
View
V-8 4.8L Alt. W.P. P.S. Belt Drive Tensioner for BMW and Rolls-Royce
  • Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
  • Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
  • Torsional round spring design provides reliability as well as consistent tension
Out of Stock
C$539.00Was C$587.51 Save 8%
View
V-8 4.9L Tensioner Assy. Belt Drive Tensioner for Cadillac
  • Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
  • Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
  • Torsional round spring design provides reliability as well as consistent tension
Out of Stock
C$269.00Was C$293.21 Save 8%
View
V-8 5.0L Accessory Drive Belt Drive Tensioner for 2018-2024 Ford Mustang
  • Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
  • Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
  • Torsional round spring design provides reliability as well as consistent tension
Out of Stock
C$219.00Was C$238.71 Save 8%
View
V-8 5.0L A.C. Stretch Fit V-Ribbed Belt for 2011-2024 Ford F-150 and Mustang
  • Gates engineered tensile cord has the needed combination of strength and flexibility using advanced polyamide tensile…
  • Patented highly engineered EPDM belt ribs are extremely resistant to contamination, wear and pilling
  • NOTE: Stretch Fit belts are single-use only and must be replaced if removed
Out of Stock
C$51.99Was C$56.67 Save 8%
View
V8 5.0L DriveAlign Automatic Belt Tensioner for Ford and Mercury
  • Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
  • Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
  • Torsional round spring design provides reliability as well as consistent tension
Out of Stock
C$469.00Was C$511.21 Save 8%
View
V-8 5.0L Eng. To Fan Stretch Fit V-Ribbed Belt for Land Rover
  • Gates engineered tensile cord has the needed combination of strength and flexibility using advanced polyamide tensile…
  • Patented highly engineered EPDM belt ribs are extremely resistant to contamination, wear and pilling
  • NOTE: Stretch Fit belts are single-use only and must be replaced if removed
Out of Stock
C$51.99Was C$56.67 Save 8%
View
V-8 5.0L Fan P.S. High Capacity V-Belt (Standard) for 234 vehicles
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
Out of Stock
C$50.99Was C$55.58 Save 8%
View
V8 5.0L Micro-V Serpentine Belt for Ford and BMW
  • Engineered to save your fleet money and reduce downtime
  • Problem solver designed for the toughest applications
  • Tensioner Replacement is Recommended (if equipped)
Out of Stock
C$92.99Was C$101.36 Save 8%
View
V8 5.0L Serpentine Belt Kit for 1988-1993 Ford Mustang
  • NOTE: Kit contents vary depending on specific needs of vehicle kit application
  • Designed for convenience, easy parts sourcing and reduced customer comebacks
  • Meets or exceeds OE standards in form, function and fit
Out of Stock
C$289.00Was C$315.01 Save 8%
View
V8 5.0L Serpentine Belt Kit for Ford and Mercury
  • NOTE: Kit contents vary depending on specific needs of vehicle kit application
  • Designed for convenience, easy parts sourcing and reduced customer comebacks
  • Meets or exceeds OE standards in form, function and fit
Out of Stock
C$289.00Was C$315.01 Save 8%
View
V8 5.0L Serpentine Belt Kit for Ford, Lincoln and Mercury
  • NOTE: Kit contents vary depending on specific needs of vehicle kit application
  • Designed for convenience, easy parts sourcing and reduced customer comebacks
  • Meets or exceeds OE standards in form, function and fit
Out of Stock
C$289.00Was C$315.01 Save 8%
View
V8 5.0L Serpentine Belt Kit for Lincoln, Ford and Mercury
  • NOTE: Kit contents vary depending on specific needs of vehicle kit application
  • Designed for convenience, easy parts sourcing and reduced customer comebacks
  • Meets or exceeds OE standards in form, function and fit
Out of Stock
C$309.00Was C$336.81 Save 8%
View
V-8 5.0L Tensioner Assy. Belt Drive Tensioner for 1996-2001 Ford Explorer and Mercury Mountaineer
  • Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
  • Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
  • Torsional round spring design provides reliability as well as consistent tension
Out of Stock
C$239.00Was C$260.51 Save 8%
View
V-8 5.3L A.C. Belt Drive Tensioner for 47 vehicles
  • Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
  • Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
  • Torsional round spring design provides reliability as well as consistent tension
Out of Stock
C$107.99Was C$117.71 Save 8%
View
V-8 5.3L A.C. HD V-Ribbed Belt for 40 vehicles
  • Engineered to save your fleet money and reduce downtime
  • Problem solver designed for the toughest applications
  • Tensioner Replacement is Recommended (if equipped)
Out of Stock
C$89.99Was C$98.09 Save 8%
View
V-8 5.3L A.C. Stretch Fit V-Ribbed Belt for 30 vehicles
  • Gates engineered tensile cord has the needed combination of strength and flexibility using advanced polyamide tensile…
  • Patented highly engineered EPDM belt ribs are extremely resistant to contamination, wear and pilling
  • NOTE: Stretch Fit belts are single-use only and must be replaced if removed
Out of Stock
C$54.99Was C$59.94 Save 8%
View
V8 5.3L Serpentine Belt Kit for 20 vehicles
  • NOTE: Kit contents vary depending on specific needs of vehicle kit application
  • Designed for convenience, easy parts sourcing and reduced customer comebacks
  • Meets or exceeds OE standards in form, function and fit
Out of Stock
C$279.00Was C$304.11 Save 8%
View
V-8 5.3L Serpentine Standard V-Ribbed Belt for 67 vehicles
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • EPDM rubber constructions resist cracking on the rib surface
  • Tensioner Replacement is Recommended (if equipped)
Out of Stock
C$66.99Was C$73.02 Save 8%
View
V-8 5.3L Serpentine Stretch Fit V-Ribbed Belt for Chevrolet, GMC and Cadillac
  • Gates engineered tensile cord has the needed combination of strength and flexibility using advanced polyamide tensile…
  • Patented highly engineered EPDM belt ribs are extremely resistant to contamination, wear and pilling
  • NOTE: Stretch Fit belts are single-use only and must be replaced if removed
Out of Stock
C$69.99Was C$76.29 Save 8%
View
V-8 5.3L Tensioner Assy. Belt Drive Tensioner for 30 vehicles
  • Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
  • Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
  • Torsional round spring design provides reliability as well as consistent tension
Out of Stock
C$209.00Was C$227.81 Save 8%
View
V-8 5.3L Tensioner Assy. Belt Drive Tensioner for 30 vehicles
  • Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
  • Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
  • Torsional round spring design provides reliability as well as consistent tension
Out of Stock
C$229.00Was C$249.61 Save 8%
View
V-8 5.3L Tensioner Assy. Belt Drive Tensioner for Chevrolet, GMC and Cadillac
  • Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
  • Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
  • Torsional round spring design provides reliability as well as consistent tension
Out of Stock
C$142.99Was C$155.86 Save 8%
View