Trade prices for dealers.

0

Engine: 113,104 Results

In stock
Twin Cam 3.938in Head & Base Kit .027inMls Air Cooled
  • The center or shim layer is an uncoated stainless steel layer which can be varied to accommodate multiple thickness…
  • Requires less clamp load creating less bore distortion
  • Conforms load distribution across the sealing area
Out of Stock
C$109.99Was C$119.89 Save 8%
View
Twin Cam Cyl Base Locating Dowel O-Ring, Pair
  • All of Cometic's gaskets and seals have been tested on both the street and the track as well as vigorous Dyno shakedowns
Out of Stock
C$27.99Was C$30.51 Save 8%
View
Ultra 310X/LX/R 8.21 CR Piston Kit for Kawasaki
  • Dedicated forgings allow for optimized strength-to-weight ratio
  • Includes high-quality piston rings, wrist pin(s), and circlips
  • Engineered, forged, and machined in the USA in Mentor, OH
Out of Stock
C$359.00Was C$391.31 Save 8%
View
Ultra Series Honda K20A 87.5mm Bore 10.0:1 CR Set of 4 Pistons
  • Designed specifically for Honda and Acura K20a/K24a Engines. To provide optimized performance durability
  • Includes high-quality wrist pins, locks, and JE Pro Seal premium piston rings
  • Made 100% in the USA
Out of Stock
C$1,639.00Was C$1,786.51 Save 8%
View
Ultra Series Honda K20A 87mm Bore 10.0:1 CR Set of 4 Pistons
  • Designed specifically for Honda and Acura K20a/K24a Engines. To provide optimized performance durability
  • Includes high-quality wrist pins, locks, and JE Pro Seal premium piston rings
  • Made 100% in the USA
Out of Stock
C$1,639.00Was C$1,786.51 Save 8%
View
Ultra Series Honda K20A 88mm Bore 10.0:1 CR Set of 4 Pistons
  • Designed specifically for Honda and Acura K20a/K24a Engines. To provide optimized performance durability
  • Includes high-quality wrist pins, locks, and JE Pro Seal premium piston rings
  • Made 100% in the USA
Out of Stock
C$1,639.00Was C$1,786.51 Save 8%
View
Ultra Series Honda K20C 86.5mm Bore 10.0:1 CR Set of 4 Pistons
  • Designed specifically for Honda K20A Engines To provide optimized performance durability
  • Includes high-quality wrist pins, locks, and JE Pro Seal premium piston rings
  • Made 100% in the USA
Out of Stock
C$1,639.00Was C$1,786.51 Save 8%
View
Ultra Series Mitsubishi 4B11T 86mm Bore 10.0:1 CR Set of 4 Pistons
  • Designed specifically for Mitsubishi 4B11T Engines. To provide optimized performance durability
  • Includes high-quality wrist pins, locks, and JE Pro Seal premium piston rings
  • Made 100% in the USA
Out of Stock
C$1,639.00Was C$1,786.51 Save 8%
View
Ultra Series Mitsubishi 4B11T 87mm Bore 10.0:1 CR Set of 4 Pistons
  • Designed specifically for Mitsubishi 4B11T Engines. To provide optimized performance durability
  • Includes high-quality wrist pins, locks, and JE Pro Seal premium piston rings
  • Made 100% in the USA
Out of Stock
C$1,639.00Was C$1,786.51 Save 8%
View
Ultra Series Nissan SR20DET 86.5mm Bore 10.0:1 CR Set of 4 Pistons
  • Designed specifically for Nissan SR20DE Engines. To provide optimized performance durability
  • Includes high-quality wrist pins, locks, and JE Pro Seal premium piston rings
  • Made 100% in the USA
Out of Stock
C$1,639.00Was C$1,786.51 Save 8%
View
Ultra Series Nissan SR20DET 86mm Bore 10.0:1 CR Set of 4 Pistons
  • Designed specifically for Nissan SR20DE Engines. To provide optimized performance durability
  • Includes high-quality wrist pins, locks, and JE Pro Seal premium piston rings
  • Made 100% in the USA
Out of Stock
C$1,639.00Was C$1,786.51 Save 8%
View
Ultra Series Subaru EJ205 92mm Bore 8.5:1 CR Set of 4 Pistons
  • Designed specifically for Subaru WRX EJ205 Engines. To provide optimized performance durability
  • Includes high-quality wrist pins, locks, and JE Pro Seal premium piston rings
  • Made 100% in the USA
Out of Stock
C$1,639.00Was C$1,786.51 Save 8%
View
Ultra Series Subaru FA20DIT 86mm Bore 10.0:1 CR Set of 4 Pistons
  • Designed specifically for Subaru FA20 DIT Engines. To provide optimized performance durability
  • Includes high-quality wrist pins, locks, and JE Pro Seal premium piston rings
  • Made 100% in the USA
Out of Stock
C$1,639.00Was C$1,786.51 Save 8%
View
Universal 160 Degree OE Type Thermostat for 239 vehicles
  • Quality-controlled factory calibration assures accuracy of opening and closing, regardless of pressure changes
  • WARNING: Cancer and Reproductive Harm ? www.P65Warnings.ca.gov
  • OEM fit, function and design for precise engine cooling
Out of Stock
C$43.99Was C$47.95 Save 8%
View
Up to 03 Honda F20C S2000 87mm Bore .120 inch MLS 2.0L Head Gasket
  • The center or shim layer is an uncoated stainless steel layer which can be varied to accommodate multiple thickness…
  • Requires less clamp load creating less bore distortion
  • Conforms load distribution across the sealing area
Out of Stock
C$389.00Was C$424.01 Save 8%
View
USA Standard Bearing Kit 10.25in for Ford
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking…
  • Uses Koyo bearings and races
  • Fits Dana Ford 10.25"
Out of Stock
C$529.00Was C$576.61 Save 8%
View
USA Standard Bearing Kit For 09+ GM 8.6in for 16 vehicles
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking…
  • Uses Koyo bearings and races
  • Fits 2009 and up GM 8.6"
Out of Stock
C$409.00Was C$445.81 Save 8%
View
USA Standard Bearing Kit for 1963-1979 Chevrolet Corvette
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking…
  • Uses Koyo bearings and races
  • Fits 1963-1979 Corvette
Out of Stock
C$459.00Was C$500.31 Save 8%
View
USA Standard Bearing Kit for 2011-2014 Ford F-150
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking…
  • Fits 2011 and up Ford 8.8" in F150
  • Uses Koyo bearings and races
Out of Stock
C$309.00Was C$336.81 Save 8%
View
V-10 8L Heavy Duty Thermostat-180 Deg. Weir-Stat w/O-Ring Perimeter Seal for 1992-2010 Dodge Viper
  • Jiggle pins for air venting, seals and gaskets make these thermostats equivalent to the original equipment parts
  • Quality-controlled factory calibration assures accuracy of opening and closing, regardless of pressure changes
  • Heavy-gauge brass and stainless steel construction for corrosion resistance
Out of Stock
C$299.00Was C$325.91 Save 8%
View
V-6 2.5L Alt. Belt Drive Pulley for Mazda and Ford
  • Mounting hardware included for some popular applications
  • Reliable operation under severe conditions
  • Premium bearings eliminate bearing noise
Out of Stock
C$289.00Was C$315.01 Save 8%
View
V-6 2.5L P.S. Belt Drive Pulley for Mazda and Ford
  • Mounting hardware included for some popular applications
  • Reliable operation under severe conditions
  • Premium bearings eliminate bearing noise
Out of Stock
C$279.00Was C$304.11 Save 8%
View
V-6 2.7L Tensioner Assy. Belt Drive Tensioner for Kia and Hyundai
  • Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
  • Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
  • Torsional round spring design provides reliability as well as consistent tension
Out of Stock
C$609.00Was C$663.81 Save 8%
View
V-6 2.8L Idler Belt Drive Pulley for Audi
  • Mounting hardware included for some popular applications
  • Reliable operation under severe conditions
  • Premium bearings eliminate bearing noise
Out of Stock
C$187.99Was C$204.91 Save 8%
View
V-6 3.0L A.C. Belt Drive Pulley for Nissan
  • Mounting hardware included for some popular applications
  • Reliable operation under severe conditions
  • Premium bearings eliminate bearing noise
Out of Stock
C$123.99Was C$135.15 Save 8%
View
V-6 3.0L Air Intake Hose for 2002-2006 Mazda MPV
  • OE-exact and application-specific design ensures an easy fit and installation
  • Designed with high quality materials for a long service life
  • OE quality at a lower price provides excellent value
Out of Stock
C$66.99Was C$73.02 Save 8%
View
V-6 3.0L Air Intake Hose for 2003-2007 Acura TL and Honda Accord
  • OE-exact and application-specific design ensures an easy fit and installation
  • Designed with high quality materials for a long service life
  • OE quality at a lower price provides excellent value
Out of Stock
C$81.99Was C$89.37 Save 8%
View
V-6 3.0L Air Intake Hose for Toyota and Lexus
  • OE-exact and application-specific design ensures an easy fit and installation
  • Designed with high quality materials for a long service life
  • OE quality at a lower price provides excellent value
Out of Stock
C$99.99Was C$108.99 Save 8%
View
V-6 3.0L Alt. A.C. Belt Drive Pulley for Audi
  • Mounting hardware included for some popular applications
  • Reliable operation under severe conditions
  • Premium bearings eliminate bearing noise
Out of Stock
C$124.99Was C$136.24 Save 8%
View
V-6 3.0L Engine Variable Valve Timing Solenoid for 4 vehicles
  • Continuously controls oil flow for precise timing and maximum engine performance
  • Direct replacement ensures exact fit and easy installation
  • Superior construction with exceptional components
Out of Stock
C$187.99Was C$204.91 Save 8%
View
V-6 3.0L Fan Alt. Standard V-Ribbed Belt for 15 vehicles
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • EPDM rubber constructions resist cracking on the rib surface
  • Tensioner Replacement is Recommended (if equipped)
Out of Stock
C$48.99Was C$53.40 Save 8%
View
V-6 3.0L Micro-V Belt for 1989-1995 Ford Taurus
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • EPDM rubber constructions resist cracking on the rib surface
  • Tensioner Replacement is Recommended (if equipped)
Out of Stock
C$84.99Was C$92.64 Save 8%
View
V6 3.0L Oil Filler Cap for Lexus and Toyota
  • Manufactured to meet or exceed OEM specifications in fit, form and performance
  • WARNING: Cancer and Reproductive Harm ? www.P65Warnings.ca.gov
  • Wide range of applications covering all makes and models
Out of Stock
C$34.99Was C$38.14 Save 8%
View
V-6 3.0L P.S. High Capacity V-Belt (Standard) for 57 vehicles
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
Out of Stock
C$56.99Was C$62.12 Save 8%
View