Trade prices for dealers.

0

Engine: 146,977 Results

In stock
Aluminum Radiator - 3 Row for Chevrolet
  • 100% TIG Welded (Brazed) seams
  • Polished Top and tanks for custom show appearance
  • Applications supporting up to 1000+ horsepower
Out of Stock
C$520.99Was C$567.88 Save 8%
View
Billet Electric Water Pump for 74 vehicles
  • Available in Billet aluminum housings
  • Available applications rated at 50gpm flow rate
  • Applications available for popular performance engines
Out of Stock
C$569.99Was C$621.29 Save 8%
View
Billet Fuel Filter
  • Recommended as a post filter (after the pump) in EFI applications
Out of Stock
C$308.99Was C$336.80 Save 8%
View
Breather Tank / Catch Can
  • Welded Construction
  • Capacity: 0.75L
  • Weight: 1.5 LB
Out of Stock
C$234.99Was C$256.14 Save 8%
View
Chevrolet Small Block Exhaust Valve Kit - 1.500in Head Dia. 4.911in O/A Length, 0.3415in Stem
  • Swirl Polished and Fully Machined: The under head areas are meticulously swirl polished, and the combustion faces are…
  • Chrome Stems and Hard Tips: These valves feature chrome stems and hard tips for increased durability and wear…
  • Variety of Shapes: Choose from the Street Master (Straight Stem) or Street Flo shapes, allowing you to customize your…
Out of Stock
C$299.00Was C$325.91 Save 8%
View
Dist Billet I3 V8 400-455 Non/Vac Blk Male Cap for Buick
  • Plug n' Play billet distributors are designed for maximum ignition performance at a price you can afford
  • Our Billet I3 distributors ship with Ignitor III multi-spark rev limiting modules.
  • Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
Out of Stock
C$723.99Was C$789.15 Save 8%
View
Fuel Level Sender
  • Includes cork gasket, float assembly, mounting screws and instructions.
Out of Stock
C$95.99Was C$104.63 Save 8%
View
Fuel Level Sender
  • 240 ohms empty, 33 ohms full
  • Allow at least 1/4" clearance from end of tube to bottom of tank
Out of Stock
C$201.99Was C$220.17 Save 8%
View
High Performance Fan/Shroud Package for GMC and Chevrolet
  • Aircraft quality aluminum shroud material make to form fit to your specific radiator
  • Fan configuration (2x14”) based on CFM draw and optimal shroud coverage
  • Applications for GM, Ford, Dodge/Chrysler/Jeep
Out of Stock
C$781.99Was C$852.37 Save 8%
View
Ignition Coil, 4.7L for Lexus and Toyota
  • Designed and tested to meet or exceed OEM performance specifications
  • Improves engine startup, idle, and restores performance
  • Refreshes ignition system, ensuring strong spark for stock and modified vehicles
Out of Stock
C$59.99Was C$65.39 Save 8%
View
Intake Manifold Gasket
  • Hi-Ram Intake Gasket
Out of Stock
C$38.99Was C$42.50 Save 8%
View
Oil Filler Cap, Hoonigan for 68 vehicles
  • Billet CNC-machined aluminum for optimal fit and finish
  • Included O-ring ensures a perfect seal
  • Available in silver and red
Out of Stock
C$94.99Was C$103.54 Save 8%
View
Oil Pan Kit- Fabricated
  • Trap door baffles keep oil under control during hard acceleration
  • Available in fold iridite or black finish
  • Popular applications for drag race, road race, and circle track applications
Out of Stock
C$531.99Was C$579.87 Save 8%
View
Oil Pan Kit- Fabricated
  • Trap door baffles keep oil under control during hard acceleration
  • Available in Gold Iridite or Black Finish
  • Popular applications for drag race applications
Out of Stock
C$531.99Was C$579.87 Save 8%
View
Oil Pan Kit- Fabricated for 1962-1967 Chevrolet Chevy II
  • Trap door baffles keep oil under control during hard acceleration and cornering
  • Pans available in additional finishes
  • Kit includes Pan, Pump Pickup, Pan Gasket, and pan mounting bolt kit
Out of Stock
C$462.99Was C$504.66 Save 8%
View
Onyx Series Turbo Shield/Blanket GEN-3 T4 Shield
  • Silicone coated Onyx Black outer shell.
  • Silica inner insulation layer.
  • Barrier layer of fine stainless mesh.
Out of Stock
C$499.99Was C$544.99 Save 8%
View
Performance Air Intake System for Polaris
  • Improved air flow for engine performance
  • K& N 10-Year/Million Mile Limited Warranty™
  • 50 State legal
Out of Stock
C$755.99Was C$824.03 Save 8%
View
Pro Wire, SBC, Skt. Cap, over VC
  • 8mm red silicon jacket withstands temperatures up to 550°F
  • Direct fit, no cutting or splicing required
  • Red spark plug wire with Black plug boots
Out of Stock
C$167.99Was C$183.11 Save 8%
View
Replacement Air Filter
  • Designed to increase horsepower
  • Emissions legal in all 50 States
  • Will not void vehicle warranty
Out of Stock
C$83.49Was C$91.00 Save 8%
View
Standard Engine Overhaul Gasket Kit for Chevrolet
  • Designed For OE Replacement Engine Rebuilds
  • Gasket Kit Includes Premium-Quality Parts
  • Everything Required For A Complete Engine Rebuild
Out of Stock
C$82.99Was C$90.46 Save 8%
View
Thermostat Gasket - Molded Rubber on Aluminum Carrier
  • Seals surface irregularities between intake manifold and water outlet/thermostat housing
  • Compatible with all intake manifold materials
  • Does not require gasket sealer for installation
Out of Stock
C$60.99Was C$66.48 Save 8%
View
Titanium Turbo Blanket for 2013-2018 Ford Focus ST
  • Insulates turbo hot side to reduce engine bay temperatures and maintain turbocharger efficiency
  • Protects vital cooling components from excessive heat
  • Interior layer is rated to withstand 2,300F
Out of Stock
C$316.99Was C$345.52 Save 8%
View
Titanium Turbo Shield/Blanket T4 Shield 010144
  • Custom Fit For Easy Install
  • Hi-Tech Custom Carbon Fiber Look
  • Double Reinforced Seams Inside/Outside
Out of Stock
C$384.99Was C$419.64 Save 8%
View
Tuner Series D-Series Stage 2 Camshaft for Honda
  • Valve Clearance (Intake/Exhaust) .008 in./.010 in.
  • Exhaust Duration Lift 225 Degrees/10.8mm
  • Intake Duration/Lift 266 Degrees/13.5mm
Out of Stock
C$669.00Was C$729.21 Save 8%
View
Unilite Dist., 332- 428 FE Ford
  • Quick and simple 3 wire hookup
  • Fully adjustable mechanical advance
  • Classic Mallory look and styling
Out of Stock
C$909.93Was C$991.82 Save 8%
View
Universal 100 Gallon In-Bed Transfer Tank
  • Strength Channels Around Transfer Pump Fitting For Extra Rigidity
  • 2 in. NPT Fitting For Transfer Pump
  • Made In The U.S.A.
Out of Stock
C$2,389.00Was C$2,604.01 Save 8%
View
Universal Clamp-On Air Filter
  • ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as…
  • UNIVERSAL FITMENT: Designed for use on a variety of applications
  • NO-HASSLE WARRANTY: 1-Year Limited Warranty
Out of Stock
C$83.49Was C$91.00 Save 8%
View
V-6 2.7L Idler Belt Drive Pulley for 33 vehicles
  • Mounting hardware included for some popular applications
  • Reliable operation under severe conditions
  • Premium bearings eliminate bearing noise
Out of Stock
C$62.99Was C$68.66 Save 8%
View
Vapor Guard™ Hose
  • Carburetion Hose – Rated Maximum 50 PSI (not for use with fuel injection systems)
Out of Stock
C$224.99Was C$245.24 Save 8%
View
WIRING HARNESS
  • TI Automotive component for TI Automotive fuel pumps and modules
Out of Stock
C$40.99Was C$44.68 Save 8%
View