Trade prices for dealers.

0

Engine: 147,020 Results

In stock
Adapter
  • Genuine Holley Quality Parts
Out of Stock
C$42.99Was C$46.86 Save 8%
View
Air Cleaner 14" Black
  • Traditional Look open element style
  • Black painted finish
  • Holley logo stamped into the top
Out of Stock
C$148.99Was C$162.40 Save 8%
View
Classic Carburetor for 578 vehicles
  • Calibrated and intended for small V-8 engines
  • Single feed fuel inlet for easy installation
  • Power valve blow-out protection
Out of Stock
C$1,360.99Was C$1,483.48 Save 8%
View
Fuel Cell EFI Pump Module Assembly
  • Update your fuel cell to EFI the easy way!
  • Designed to drop right into your existing 6 bolt flange fuel cell
  • Module with Dual 255 LPH fuel pumps configurations
Out of Stock
C$1,280.99Was C$1,396.28 Save 8%
View
Fuel Line
  • Rugged Billet Construction
  • AN fittings
  • Red and Blue Anodized
Out of Stock
C$422.99Was C$461.06 Save 8%
View
Fuel Rail Kit
  • Genuine Holley Quality Parts
  • 6AN Fuel Rails
Out of Stock
C$257.99Was C$281.21 Save 8%
View
Low-Profile Intake Manifold - Godzilla - Black Powdercoat
  • Removable lower intake panel that can be removed for additional porting, nitrous, etc
  • Compatible with OE or Holley accesory drives and OE or Holley Fuel Rails
  • Includes 3/8 NPT, 1/4 NPT and 1/8 NPT vacuum ports at rear of manifold
Out of Stock
C$1,707.99Was C$1,861.71 Save 8%
View
Marine Renew Kit
  • Contains all parts and gaskets necessary to restore your marine carburetor to like new performance
  • Detailed instructions included
Out of Stock
C$118.99Was C$129.70 Save 8%
View
Perf RPM, Big Block, CNC Chamber, Hyd Flat for 75 vehicles
  • Large 230cc Intake ports for maximum flow from an "as-cast" port
  • CNC combustion chambers for cylinder-to-cylinder consistency and performance
  • Assembled with spring set for Hydraulic Flat Tappet Camshafts
Out of Stock
C$1,978.99Was C$2,157.10 Save 8%
View
Red, Blue, or Black Competition Electric Fuel Pumps Service Kit
  • Service kit for Holley Red, Blue, or Black Competition Electric Fuel Pumps
  • Works for both Automotive and Marine Pumps
  • Full kit including new Rotor, Vanes, Gaskets, Springs, and Diaphragm
Out of Stock
C$65.99Was C$71.93 Save 8%
View
Renew Kit Carburetor Rebuild Kit
  • Step-By-Step Instructions
  • Detailed Tuning Guide
  • Competitively Priced
Out of Stock
C$119.99Was C$130.79 Save 8%
View
Replacement Fuel Bowl Kit
  • Side-hung-float style with provision for transfer tube and accelerator pump
  • Used on model 4160 carburetors
  • accepts the adjustable-style needle and seat assembly
Out of Stock
C$104.99Was C$114.44 Save 8%
View
Replacement Main Body
  • Main bodies are factory assembled and kit includes new gaskets to complete the installation
  • Simple installation with common hand tools that you already have in your shop
  • Main bodies are available for our most popular carburetor models
Out of Stock
C$385.99Was C$420.73 Save 8%
View
Replacement Main Body
  • Main bodies are factory assembled and kit includes new gaskets to complete the installation
  • Simple installation with common hand tools that you already have in your shop
  • Main bodies are available for our most popular carburetor models
Out of Stock
C$407.99Was C$444.71 Save 8%
View
Vintage Finned Valve Cover - "Holley" Script for Chevrolet, GMC and Pontiac
  • Designed to fit all Small Block Chevy applications with center bolt style cylinder heads – polished mounting hardware…
  • Die-cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and…
  • Emissions compliant valve covers include pre-installed internal oil baffles as well as an oil fill plug and PCV grommet
Out of Stock
C$563.99Was C$614.75 Save 8%
View
Vintage Finned Valve Cover - "Holley" Script for Chevrolet, GMC and Pontiac
  • Designed to fit all Small Block Chevy applications with center bolt style cylinder heads – polished mounting hardware…
  • Die-cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and…
  • Emissions compliant valve covers include pre-installed internal oil baffles as well as an oil fill plug and PCV grommet
Out of Stock
C$472.99Was C$515.56 Save 8%
View
Vintage Series GM Licensed Air Cleaner - Factory Orange Machined
  • 14” diameter die-cast aluminum construction with finned design and an iconic Chevy “Bowtie” logo
  • Available with replacement paper filter or reusable cotton gauze (red) style air filter elements
  • Includes stamped steel color matched SureFlo style base with knock out provisions for fresh air adapter
Out of Stock
C$360.99Was C$393.48 Save 8%
View
Water Pump Assembly
  • Genuine Holley Quality Parts
Out of Stock
C$377.99Was C$412.01 Save 8%
View
SPE-2955 Spectre Dual Feed Fuel Line Kit
  • Triple chrome plated hose fitting
  • Includes hoses and clamps
  • Engineered for optimum fit and function
Out of Stock
C$194.99Was C$212.54 Save 8%
View
1150 CFM Gen 3 Ultra Dominator Carburetor
  • Designed for use on Drag race, Pro Street, or any high horsepower engines
  • Calibrations optimized for today's larger race engines and new fuels
  • Contoured hex head squirter screws for streamlined airflow
Out of Stock
C$2,506.99Was C$2,732.62 Save 8%
View
190, 255, and 350 LPH FUEL PUMP - 10 ORB ADAPTER
  • Clamp-on 6160-T6 aluminum adapter attaches directly to fuel pump body with no modification
  • Patented design includes o-ring to seal the fuel pump to the adapter
  • Four sizes available to fit the 255, 340, and 455 lph pumps as well as the VR series pumps
Out of Stock
C$84.99Was C$92.64 Save 8%
View
3x2 Center Carburetor
  • Electric Choke
  • Center Carburetor for SBC Tri-Power set-up
  • Shiny Finish
Out of Stock
C$700.99Was C$764.08 Save 8%
View
650 CFM Ultra Double Pumper Carburetor
  • Factory preset electric choke for easy startups
  • Mechanical secondaries for awesome tire turning performance
  • Aluminum construction for a 43% weight savings
Out of Stock
C$1,242.99Was C$1,354.86 Save 8%
View
850 CFM Competition Double Pumper Carburetor-Aluminum
  • No choke for maximum airflow
  • Mechanical secondaries for awesome tire turning performance
  • Dual feed fuel inlets for constant high volume fuel delivery
Out of Stock
C$1,205.99Was C$1,314.53 Save 8%
View
8" x 8" HydraMat, Cross
  • Works with Alcohol, Ethanol, Methanol, and E-85 fuels
  • Works with 2-cycle oil blends as high as 20:1
  • Not for use with diesel fuels
Out of Stock
C$526.99Was C$574.42 Save 8%
View
Aluminum Street HP Carburetor for 578 vehicles
  • Screw in air bleeds for precision tuning capabilities
  • Four corner idle for precise idle control
  • Available in 650, 750, 850, and 950 CFM versions
Out of Stock
C$1,280.99Was C$1,396.28 Save 8%
View
Base Gasket
  • Genuine Holley Quality Parts
Out of Stock
C$24.99Was C$27.24 Save 8%
View
Billet Regulator Bracket
  • Clear anodized billet construction
  • Simplifies mounting Holley fuel pressure regulators
  • Included hardware for easy installation
Out of Stock
C$130.99Was C$142.78 Save 8%
View
Billet Regulator Bracket
  • Black anodized billet construction
  • Simplifies mounting Holley fuel pressure regulators
  • Included hardware for easy installation
Out of Stock
C$122.99Was C$134.06 Save 8%
View
Double Adjustable Fuel Regulator
  • Individual adjustment settings, one for idle and wide open throttle.
  • Fuel pressure adjustability at idle can help prevent flooding at low rpms
  • Alcohol and E85 compatible.
Out of Stock
C$366.99Was C$400.02 Save 8%
View
Emulsion Jet
  • 2 per Package
  • 6/32 Thread
  • .036" Jet Size
Out of Stock
C$32.99Was C$35.96 Save 8%
View
Equipped Billet Fuel Cell Cap
  • Features 5.343'' 12-bolt flange
  • Large 3'' opening
  • Stainless steel hardware included
Out of Stock
C$307.99Was C$335.71 Save 8%
View
Fuel Bowl Kit
  • Replacement Fuel Bowl Kit
  • Used on model 4160 carburetors
  • Accepts the adjustable-style needle and seat assembly
Out of Stock
C$112.99Was C$123.16 Save 8%
View
Fuel Bowl Plug Gasket
  • Fits All Holley Quick Change Fuel Bowls
  • 10 Pack
Out of Stock
C$18.99Was C$20.70 Save 8%
View
Fuel Cell Rollover Valve
  • 10AN ORB port to 10AN male
  • Low-profile design
  • Pump gas and E85 compatible
Out of Stock
C$69.99Was C$76.29 Save 8%
View
Gerotor Replacement Kit
  • Gerotor kit for 12125 and 12-150 fuel pumps
  • Includes lower gasket, wear plate, wear plate O-ring and geroter set
Out of Stock
C$262.99Was C$286.66 Save 8%
View
GM Muscle Series Air Cleaner - Satin Black Machined
  • Features clean, modern styling with high definition “Chevrolet and Bowtie” logo
  • Fits Holley 4150 and 4160 and other carburetors with 5.125” diameter neck
  • Die-cast aluminum lid construction
Out of Stock
C$400.99Was C$437.08 Save 8%
View
Hi-Ram Intake Plenum Top, 2 x 4150 - Big Block Chevy / Small Block Chevy
  • The Big Block Chevy Hi-Ram manifold is available in either a traditional Hi-Ram 105mm plenum top or with a 2 x 4150…
  • Requires the use of early type GM or small cap MSD or Holley Distributors. Not compatible with HEI distributors
  • Cast 356-T6 Aluminum Construction, Natural, Satin As-Cast Aluminum Finish
Out of Stock
C$374.99Was C$408.74 Save 8%
View
IN-LINE FUEL PULSE DAMPER
  • Fittings included for damper/regulator’s and direct mount dampers
  • Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
  • Assembled and tested in the USA
Out of Stock
C$288.99Was C$315.00 Save 8%
View
LS Carbureted Manifold 2x4 Dual Plane LS3/L92
  • Perfect for any street/performance, muscle car or street rod enthusiast
  • Power band from 1500-7000rpm
  • Cast aluminum construction
Out of Stock
C$977.99Was C$1,066.01 Save 8%
View
LS Valley Cover with Oil Fill - Natural Billet for 55 vehicles
  • Precision manufactured from billet aluminum with a modern, race inspired, trussed design
  • Available for GM LS1/LS6 (10 bolt) and LS2/LS3/LS7/LSX (11 bolt) engine applications
  • All necessary gaskets and upgraded mounting hardware sold separately
Out of Stock
C$465.99Was C$507.93 Save 8%
View
MANIFOLD-BRACKET KIT, LT4 WET-Black
  • Cast aluminum water pump manifold used in LT4 kit 20-220BK
  • Genuine Holley Quality Parts
Out of Stock
C$798.99Was C$870.90 Save 8%
View
Mid-Mount Complete Accessory System for 37 vehicles
  • SD7 A/C Compressor – Small Compact Compressor
  • Type II Power Steering Pump with Baffled Reservoir
  • No Adapters or Spacers Needed – for Easy Installation
Out of Stock
C$5,636.99Was C$6,144.32 Save 8%
View
Needle & Seat Assembly
  • Adjustable
  • 0.110" Seat Size
  • Viton tip
Out of Stock
C$337.99Was C$368.41 Save 8%
View
Off-Road Truck Avenger Carburetor for 578 vehicles
  • Gold Dichromate finish for extreme off road environments
  • Single feed fuel inlet for ease of installation
  • Factory preset electric choke for easy startups
Out of Stock
C$1,451.99Was C$1,582.67 Save 8%
View
Pro-Flo 4 EFI Upgrade Kit (from Legacy Pro-Flo to Pro-Flo 4)
  • Economical EFI System solution for users with existing legacy Edelbrock Pro Flo 1,2 or 3 EFI systems and components.
  • Simplified installation, providing all existing features of Pro Flo 4 EFI
Out of Stock
C$1,943.99Was C$2,118.95 Save 8%
View
Renew Kit Carburetor Rebuild Kit
  • Step-By-Step Instructions
  • Detailed Tuning Guide
  • Competitively Priced
Out of Stock
C$135.99Was C$148.23 Save 8%
View
SPE-42869 Breather Filter
  • Triple chrome-plated steel top and base
  • Includes grommet for quick installation
  • Includes heat shield
Out of Stock
C$35.99Was C$39.23 Save 8%
View
SPE-6932 Premium Clear Fuel Filter
  • Clear housing for easy viewing
  • For non-fuel injected applications
  • Filters down to 40 microns
Out of Stock
C$20.99Was C$22.88 Save 8%
View
SPECIAL ORDER AEM DryFlow Fltr for Jeep and Chevrolet
  • Engineered to boost horsepower and sharpen throttle response, giving your vehicle stronger, more immediate performance.
  • Proudly manufactured in the USA with high-quality materials and precision standards.
  • Will NOT void your vehicle’s warranty, performance you can install with total confidence.
Out of Stock
C$67.69Was C$73.78 Save 8%
View
Vintage Finned Valve Cover - "Holley" Script - SBC for Chevrolet, GMC and Pontiac
  • Designed to fit all Small Block Chevy applications with center bolt style cylinder heads – polished mounting hardware…
  • Die-cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and…
  • Emissions compliant valve covers include pre-installed internal oil baffles as well as an oil fill plug and PCV grommet
Out of Stock
C$440.99Was C$480.68 Save 8%
View
Out of Stock
C$991.99Was C$1,081.27 Save 8%
View
11" x 11" HydraMat®, Cross
  • Works with Alcohol, Ethanol, Methanol, and E-85 fuels
  • Works with 2-cycle oil blends as high as 20:1
  • Not for use with diesel fuels
Out of Stock
C$681.99Was C$743.37 Save 8%
View
30" x 14" HydraMat®, Rectangle
  • Works with Alcohol, Ethanol, Methanol, and E-85 fuels
  • Works with 2-cycle oil blends as high as 20:1
  • Not for use with diesel fuels
Out of Stock
C$2,000.99Was C$2,181.08 Save 8%
View
30" x 14" HydraMat®, Rectangle
  • Works with Alcohol, Ethanol, Methanol, and E-85 fuels
  • Works with 2-cycle oil blends as high as 20:1
  • Not for use with diesel fuels
Out of Stock
C$1,792.99Was C$1,954.36 Save 8%
View
770 CFM Street Avenger Carburetor
  • Vibratory polished for good looks
  • Optimized street calibration that works-out-of-the-box
  • Manual choke (Cable driven, hand operated) for precise cold start control
Out of Stock
C$904.99Was C$986.44 Save 8%
View
Alternator Relocation Kit (150amp Alternator w/bracket kit)
  • Design allows more chassis clearance for swap applications
  • Original equipment look and reliability
  • LT4 style standard 105 amp and premium 150 amp model alternator options available
Out of Stock
C$2,770.99Was C$3,020.38 Save 8%
View
Analog Style Fuel Pressure Gauge
  • LED dimmable backlit design with red pointers makes them easy to read day or night
  • All gauges are electric style and include sending units depending on gauge type
  • Spin lock ring threads to back of gauge case for simple and secure gauge mounting
Out of Stock
C$597.99Was C$651.81 Save 8%
View
Base Insulator
  • 1 3/8" Primary
  • Phenolic
  • 11/16" Thick
Out of Stock
C$138.99Was C$151.50 Save 8%
View
Diecast In-Tank RetroFit Fuel Module Returnless System
  • The easiest way to convert your vehicle to an in-tank, EFI fuel system
  • ¼” NPT ports for a wide variety of plumbing options
  • Optional roll over valve available
Out of Stock
C$1,520.99Was C$1,657.88 Save 8%
View
Diecast In-Tank RetroFit Fuel Module w/Return
  • The easiest way to convert your vehicle to an in-tank, EFI fuel system
  • ¼” NPT ports for a wide variety of plumbing options
  • Optional roll over valve available
Out of Stock
C$1,440.99Was C$1,570.68 Save 8%
View
Diecast In-Tank RetroFit Fuel Module w/Return
  • The easiest way to convert your vehicle to an in-tank, EFI fuel system
  • ¼” NPT ports for a wide variety of plumbing options
  • Optional roll over valve available
Out of Stock
C$880.99Was C$960.28 Save 8%
View
Emulsion Jet
  • .020" Jet Size
  • 6/32 Thread
  • 2 per Package
Out of Stock
C$20.99Was C$22.88 Save 8%
View
Fuel Cell EFI Pump Module Assembly
  • Update your fuel cell to EFI the easy way!
  • Designed to drop right into your existing 6 bolt flange fuel cell
  • Supports up to 875 EFI or 1100 Carb HP (@ 60 PSI at 13.5 Volts / 16.9 AMP Draw)
Out of Stock
C$1,081.99Was C$1,179.37 Save 8%
View
Fuel Pressure Gauge
  • 1.5 in. Diameter
  • Chromed Steel Case
  • Includes Elbow Fitting
Out of Stock
C$130.99Was C$142.78 Save 8%
View
Hi-Ram Lower Manifold - GM LS3/L92
  • Plenum Top Gasket Type – 3/32” Round O-ring Cord
  • Port Size – 2.49” Height x 1.21” Wide
  • Mounting Flange Gasket Type – Standard LS3 Molded O-Ring
Out of Stock
C$1,451.99Was C$1,582.67 Save 8%
View
Hi-Ram Lower Manifold - GM LS7
  • Mounting Flange Gasket Type – Standard LS3 Molded O-Ring
  • Plenum Top Gasket Type – 3/32” Round O-ring Cord
  • Port Size – 2.49” Height x 1.21” Wide
Out of Stock
C$1,451.99Was C$1,582.67 Save 8%
View
HP Main Body Retro Fit Kit
  • All Necessary Parts Are Included
  • Simple Installation With Common Hand Tools
  • Eligible For Holley Contingency Programs
Out of Stock
C$480.99Was C$524.28 Save 8%
View
LS/LT High-Mount Accessory Drive Bracket
  • The most cost effective LS bracket solution on the market!
  • Simple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets
  • A/C bracket accepts GM R4 compressor (Sanden version now available)
Out of Stock
C$1,040.99Was C$1,134.68 Save 8%
View