Trade prices for dealers.

0

Engine: 137,175 Results

In stock
GM Licensed Valve Cover - Muscle Series - SBC - Center Bolt for Chevrolet, GMC and Pontiac
  • Features clean, modern styling with high definition “Chevrolet and Bowtie” logo
  • Die-cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and…
  • Emissions compliant valve covers include pre-installed internal oil baffles as well as an oil fill plug and PCV grommet
Out of Stock
C$663.99Was C$723.75 Save 8%
View
Godzilla High-Mount Accessory Drive
  • New oil pan hardware and dipstick included
  • Includes new front main seal and installation tool
  • Choose from natural as-cast aluminum or black finish
Out of Stock
C$5,066.99Was C$5,523.02 Save 8%
View
Marine Carburetor
  • J-Style Vent Tubes
  • Meets Coast Guard Specifications
  • Power valve blow-out protection
Out of Stock
C$1,951.99Was C$2,127.67 Save 8%
View
Marine Carburetor - Aluminum
  • J-Style Vent Tubes
  • Meets Coast Guard Specifications
  • Power valve blow-out protection
Out of Stock
C$1,672.99Was C$1,823.56 Save 8%
View
METERING BLOCK KIT
  • Replacement Primary Metering Block for Holley 2300 Series 4412 Carburetors
  • Constructed of Cast Zinc for increased durability
Out of Stock
C$135.99Was C$148.23 Save 8%
View
Mid-Mount Race Accessory System
  • Steam tube input port
  • No adapters/spacers required!
  • Works with VVT applications
Out of Stock
C$3,483.99Was C$3,797.55 Save 8%
View
Precision-Flow LS7 style Fuel Injectors (90 lb/hr) - Set of 8
  • Flow matched to 2%/Consistent fueling from cylinder to cylinder
  • Multi-point Dynamic Flow Testing/Ensures that the injectors deliver the required fuel flow throughout their operating…
  • Excellent Fuel Atomization/Maximizes fuel efficiency for clean, complete combustion
Out of Stock
C$915.99Was C$998.43 Save 8%
View
Replacement Fuel Bowl Kit (Aluminum)
  • Replacement Fuel Bowl Kit
  • Used on model 4160 carburetors
  • Accepts the adjustable-style needle and seat assembly
Out of Stock
C$172.99Was C$188.56 Save 8%
View
Replacement Windage Tray for Gen III Oil Pans
  • Replacement Windage Tray for 302-60, 302-60BK, 302-61, 302-61BK, 302-63, 302-63BK, 302-75, 302-75BK, 302-76, and…
Out of Stock
C$5.99Was C$6.53 Save 8%
View
RetroFilter Drive-By-Wire Air Cleaner - 14-Inch Diameter
  • Available in Black and Chrome finishes
  • Adapts to LS style drive-by-wire throttle bodies found on the LS2, LS3, LS7, etc.
  • Stamped aluminum lid and base for optimal durability and light weight
Out of Stock
C$418.99Was C$456.70 Save 8%
View
Stock Placement Adaptor - Godzilla 7.3L Ford Intake Manifold
  • Adapts the horizontal throttle body positioning of the PN 7483 Godzilla manifold to the stock upward facing angle.
  • Includes mounting and vacuum routing hardware.
  • Durable black powder coat finish matches the PN 7483 manifold.
Out of Stock
C$349.99Was C$381.49 Save 8%
View
Track Warrior Carburetor for 578 vehicles
  • Screw in air bleeds for precision tuning capabilities
  • Four corner idle for precise idle control
  • Available in 650, 750, and 850 CFM versions
Out of Stock
C$1,557.99Was C$1,698.21 Save 8%
View
Ultra Double Pumper Carburetor for 578 vehicles
  • Factory preset electric choke for easy startups
  • Mechanical secondaries for awesome tire turning performance
  • Aluminum construction for a 43% weight savings
Out of Stock
C$1,574.99Was C$1,716.74 Save 8%
View
Ultra XP 2BBL Carburetor
  • E85 Fuel Compatible
  • No choke tower for unobstructed airflow
  • Down-leg boosters for improved fuel signal
Out of Stock
C$1,241.99Was C$1,353.77 Save 8%
View
Valve Covers - Vintage Series - Finned - SBC - Polished
  • Designed to fit all 1958-86 Small Block Chevy engines with perimeter bolt patterns
  • 3.3” tall (3.5" overall) with pre-installed internal oil baffles (oil fill and PCV grommets also included)
  • Offered in natural cast, polished, satin black with machined fins, and factory orange with machined fins
Out of Stock
C$433.99Was C$473.05 Save 8%
View
Out of Stock
C$229.99Was C$250.69 Save 8%
View
Out of Stock
C$1,074.99Was C$1,171.74 Save 8%
View
Out of Stock
C$1,140.99Was C$1,243.68 Save 8%
View
Out of Stock
C$994.99Was C$1,084.54 Save 8%
View
1050 CFM Dominator Carburetor
  • Race only calibration
  • Screw in air bleeds offer precision tuning capabilities
  • Includes notched float and jet extensions
Out of Stock
C$1,911.99Was C$2,084.07 Save 8%
View
1350 CFM Gen 3 Ultra Dominator Carburetor
  • Designed for use on Drag race, Pro Street, or any high horsepower engines
  • Calibrations optimized for today's larger race engines and new fuels
  • Contoured hex head squirter screws for streamlined airflow
Out of Stock
C$2,624.99Was C$2,861.24 Save 8%
View
65 GPH HP In-line Fuel Pump
  • Weighs only 3.1 lbs.
  • 10 AMP maximum amp draw
  • Not designed for use on aircraft of any type.
Out of Stock
C$715.99Was C$780.43 Save 8%
View
850CFM Ultra XP Carburetor
  • E85 specific calibration
  • Stainless steel throttle plates
  • Includes notched float and jet extensions
Out of Stock
C$1,826.99Was C$1,991.42 Save 8%
View
950 CFM Gen 3 Ultra Dominator Carburetor
  • Designed for use on Drag race, Pro Street, or any high horsepower engines
  • Calibrations optimized for today's larger race engines and new fuels
  • Contoured hex head squirter screws for streamlined airflow
Out of Stock
C$2,234.99Was C$2,436.14 Save 8%
View
950CFM Ultra XP Carburetor
  • Aluminum Construction (saves 4.5 lbs - 38% weight savings)
  • Mechanical Secondaries for perfect off the line launches
  • Includes notched float and jet extensions
Out of Stock
C$1,762.99Was C$1,921.66 Save 8%
View
Base Gasket
  • Fit Holley Model 4010™, Model 4150™ and Model 4160™
  • 1 3/4" Throttle Bore
  • 5/16" Thick
Out of Stock
C$67.99Was C$74.11 Save 8%
View
Choke Control Cable Hardware
  • Manual Choke
  • Cable Clamp Kit
  • Vacuum Secondary Mount
Out of Stock
C$51.99Was C$56.67 Save 8%
View
DryFlow Air Filter for 2010-2012 Hyundai Genesis Coupe
  • Engineered to boost horsepower and sharpen throttle response, giving your vehicle stronger, more immediate performance.
  • Proudly manufactured in the USA with high-quality materials and precision standards.
  • Will NOT void your vehicle’s warranty, performance you can install with total confidence.
Out of Stock
C$71.99Was C$78.47 Save 8%
View
Emulsion Jet
  • .0225" Jet Size
  • 6/32 Thread
  • 2 per Package
Out of Stock
C$20.99Was C$22.88 Save 8%
View
Fuel Filter
  • Bi-Directional Filters
  • Made Of Billet Aluminum
  • Sintered-Bronze 40 Micron Element
Out of Stock
C$14.99Was C$16.34 Save 8%
View
Late Model Dual Pump Module Relay Kit for Dodge, Chrysler and Ford
  • Includes essential parts necessary to wire twin pump Mustang (12-153/12-175) or Challenger/Charger (12-154/12-176)…
  • Includes two fuse holders and 30A fuses, one for each pump
  • Includes connector kit composed of heat shrink sealing connectors for all wiring connections
Out of Stock
C$330.99Was C$360.78 Save 8%
View
Marine Carburetor - Aluminum
  • Universal Marine Calibration
  • Meets Coast Guard Specifications
  • Power valve blow-out protection
Out of Stock
C$1,195.99Was C$1,303.63 Save 8%
View
Tunnel Ram Carburetor
  • Universal Holley 4-Barrel Carburetor
  • Mechanical secondaries
  • Gold dichromate finish resists corrosion
Out of Stock
C$1,088.99Was C$1,187.00 Save 8%
View
Ultra Double Pumper Carburetor for 578 vehicles
  • Factory preset electric choke for easy startups
  • Mechanical secondaries for awesome tire turning performance
  • Aluminum construction for a 43% weight savings
Out of Stock
C$1,574.99Was C$1,716.74 Save 8%
View
Ultra Double Pumper Marine Carburetor
  • Factory preset electric choke for easy startups
  • Mechanical secondaries for awesome performance
  • Aluminum construction for a 43% weight savings
Out of Stock
C$1,213.99Was C$1,323.25 Save 8%
View
Valve Covers - Vintage Series - Finned - SBC - Natural
  • Designed to fit all 1958-86 Small Block Chevy engines with perimeter bolt patterns
  • 3.3” tall (3.5" overall) with pre-installed internal oil baffles (oil fill and PCV grommets also included)
  • Offered in natural cast, polished, satin black with machined fins, and factory orange with machined fins
Out of Stock
C$312.99Was C$341.16 Save 8%
View
Vintage Series GM Licensed Air Cleaner - Satin Black Machined
  • 14” diameter die-cast aluminum construction with finned design and an iconic Chevy “Bowtie” logo
  • Available with replacement paper filter or reusable cotton gauze (red) style air filter elements
  • Licensed by GM
Out of Stock
C$366.99Was C$400.02 Save 8%
View
XP Fuel Bowl Jet Extension Kit
  • Unrestricted fuel flow to the jet
  • Easy installation
  • Comes in pairs
Out of Stock
C$58.99Was C$64.30 Save 8%
View
450 CFM Marine Carburetor
  • J-Style Vent Tubes
  • Meets Coast Guard Specifications
  • Power valve blow-out protection
Out of Stock
C$1,594.99Was C$1,738.54 Save 8%
View
600 CFM Marine Carburetor-Aluminum
  • Universal Marine Calibration
  • J-Style Vent Tubes
  • Power valve blow-out protection
Out of Stock
C$1,383.99Was C$1,508.55 Save 8%
View
Emulsion Jet
  • .0465" Jet Size
  • 6/32 Thread
  • 2 per Package
Out of Stock
C$20.99Was C$22.88 Save 8%
View
Gen 3 Ultra Dominator Carburetor
  • Designed for use on Drag race, Pro Street, or any high horsepower engines
  • Calibrations optimized for today's larger race engines and new fuels
  • Contoured hex head squirter screws for streamlined airflow
Out of Stock
C$2,641.99Was C$2,879.77 Save 8%
View
GM Licensed Valve Cover - Muscle Series - SBC - Center Bolt - Natural for Chevrolet, GMC and Pontiac
  • Features clean, modern styling with high definition “Chevrolet and Bowtie” logo
  • Die-cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and…
  • Emissions compliant valve covers include pre-installed internal oil baffles as well as an oil fill plug and PCV grommet
Out of Stock
C$606.99Was C$661.62 Save 8%
View
LS Carbureted Manifold 2x4 Dual Plane LS3/L92 - Black
  • Cast aluminum construction with Black Ceramic Coating
  • Perfect for any street/performance, muscle car or street rod enthusiast
  • Power band from 1500-7000rpm
Out of Stock
C$707.99Was C$771.71 Save 8%
View
Pro-Flo 4 Standalone ECU and Harness Kit, No Distributor
  • Economical EFI System solution for users with existing EFI system and components.
  • Simplified installation, providing all existing features of Pro Flo 4 EFI
Out of Stock
C$1,797.99Was C$1,959.81 Save 8%
View
SPE-9409 Spectre Universal Tube
  • Polished aluminum finish
  • Grade 6063 aluminum
  • Can extend intake as far as needed
Out of Stock
C$21.99Was C$23.97 Save 8%
View
Ultra XP Carburetor
  • Aluminum Construction (saves 4.5 lbs - 38% weight savings)
  • Mechanical Secondaries for perfect off the line launches
  • Includes notched float and jet extensions
Out of Stock
C$1,565.99Was C$1,706.93 Save 8%
View
VR1 Series Brushless Fuel Pump w/Controller Quick Kit
  • High flow and high pressure with low amperage draw
  • Designed to be submerged in your fuel cell for a clean installation
  • Maximum amp draw of the VR1 is 19 AMPS and 38 AMPS for the VR2
Out of Stock
C$1,707.99Was C$1,861.71 Save 8%
View
VR2 Brushless Fuel Pump w/Controller-Single 16AN Inlet
  • Billet aluminum construction for durability and good looks
  • High flow and high pressure with low amperage draw
  • Maximum amp draw of 38 AMPS for the VR2
Out of Stock
C$4,829.99Was C$5,264.69 Save 8%
View