Trade prices for dealers.

0

Engine: 115,361 Results

In stock
Street Avenger - Aluminum Carburetor for 578 vehicles
  • Aluminum construction for maximum weight savings and long lasting shine
  • Optimized street calibration that works-out-of-the-box
  • 36% weight savings
Out of Stock
C$1,259.99Was C$1,373.39 Save 8%
View
Tensioner Cover Polished
  • Genuine Holley Quality Parts
Out of Stock
C$234.99Was C$256.14 Save 8%
View
Vintage Finned Valve Cover - "Holley" Script - SBC for Chevrolet, GMC and Pontiac
  • Designed to fit all Small Block Chevy applications with center bolt style cylinder heads – polished mounting hardware…
  • Die-cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and…
  • Emissions compliant valve covers include pre-installed internal oil baffles as well as an oil fill plug and PCV grommet
Out of Stock
C$440.99Was C$480.68 Save 8%
View
190, 255, and 350 LPH FUEL PUMP - 10 ORB ADAPTER
  • Clamp-on 6160-T6 aluminum adapter attaches directly to fuel pump body with no modification
  • Patented design includes o-ring to seal the fuel pump to the adapter
  • Four sizes available to fit the 255, 340, and 455 lph pumps as well as the VR series pumps
Out of Stock
C$84.99Was C$92.64 Save 8%
View
2 Port VR Series Fuel Pressure Regulator
  • EFI regulators are adjustable from 40-100 PSI base pressure
  • Compatible with gasoline, methanol, and E85*
  • 1/8” NPT gauge port
Out of Stock
C$665.99Was C$725.93 Save 8%
View
3x2 Center Carburetor
  • Electric Choke
  • Center Carburetor for SBC Tri-Power set-up
  • Shiny Finish
Out of Stock
C$700.99Was C$764.08 Save 8%
View
500 CFM Performance 2BBL Carburetor for 117 vehicles
  • Aluminum construction and vibratory polished for good looks
  • 50cc accelerator pump for additional fuel under initial acceleration
  • Power valve blow-out protection
Out of Stock
C$721.99Was C$786.97 Save 8%
View
650CFM Ultra XP Carburetor
  • Aluminum Construction (saves 4.5 lbs - 38% weight savings)
  • Mechanical Secondaries for perfect off the line launches
  • Includes notched float and jet extensions
Out of Stock
C$1,565.99Was C$1,706.93 Save 8%
View
Aluminum Street HP Carburetor for 578 vehicles
  • Screw in air bleeds for precision tuning capabilities
  • Four corner idle for precise idle control
  • Available in 650, 750, 850, and 950 CFM versions
Out of Stock
C$1,280.99Was C$1,396.28 Save 8%
View
Base Gasket
  • Fits Model 4500 Dominator®
  • 2.380" Throttle Bore
  • 1/16" Thick
Out of Stock
C$44.99Was C$49.04 Save 8%
View
Base Gasket
  • 1 3/8" Primary
  • 2" Secondary
  • 1/4" Thick
Out of Stock
C$83.99Was C$91.55 Save 8%
View
Base Gasket
  • 1 13/16" Throttle Bore
  • 1/16" Thick
  • Fits Holley Model 2300™
Out of Stock
C$29.99Was C$32.69 Save 8%
View
Base Insulator
  • 1 3/8" Primary
  • Phenolic
  • 11/16" Thick
Out of Stock
C$138.99Was C$151.50 Save 8%
View
Diecast In-Tank RetroFit Fuel Module w/Return
  • The easiest way to convert your vehicle to an in-tank, EFI fuel system
  • ¼” NPT ports for a wide variety of plumbing options
  • Optional roll over valve available
Out of Stock
C$1,440.99Was C$1,570.68 Save 8%
View
Emulsion Jet
  • 2 per Package
  • 6/32 Thread
  • .036" Jet Size
Out of Stock
C$32.99Was C$35.96 Save 8%
View
Fuel Supply System
  • Incl. Edelbrock Fuel Pressure Regulator PN" "1727" "
  • Includes Edelbrock Electric Fuel Pump PN" "1792" "
Out of Stock
C$1,152.99Was C$1,256.76 Save 8%
View
Gen 3 Ultra Dominator Carburetor for 578 vehicles
  • Designed for use on Drag race, Pro Street, or any high horsepower engines
  • Calibrations optimized for today's larger race engines and new fuels
  • Contoured hex head squirter screws for streamlined airflow
Out of Stock
C$2,646.99Was C$2,885.22 Save 8%
View
Gen 3 Ultra Dominator Carburetor for 578 vehicles
  • Designed for use on Drag race, Pro Street, or any high horsepower engines
  • Calibrations optimized for today's larger race engines and new fuels
  • Contoured hex head squirter screws for streamlined airflow
Out of Stock
C$2,646.99Was C$2,885.22 Save 8%
View
Godzilla High-Mount Accessory Drive
  • New oil pan hardware and dipstick included
  • Includes new front main seal and installation tool
  • Choose from natural as-cast aluminum or black finish
Out of Stock
C$5,066.99Was C$5,523.02 Save 8%
View
Hi-Ram EFI Intake Manifold Kit - Big Block Chevy
  • Power Band: 1500-8000 RPM
  • Plenum Top Gasket Type – 3/32” Round O-ring Cord
  • Throttle Cable Bracket is supplied in the kit
Out of Stock
C$1,908.99Was C$2,080.80 Save 8%
View
Hi-Ram Lower Manifold - GM LS1/LS2/LS6-Black
  • Port Size – 2.49” Height x 1.21” Wide
  • Plenum Top Gasket Type – 3/32” Round O-ring Cord
  • Mounting Flange Gasket Type – Standard LS3 Molded O-Ring
Out of Stock
C$1,360.99Was C$1,483.48 Save 8%
View
HP Main Body Retro Fit Kit
  • All Necessary Parts Are Included
  • Simple Installation With Common Hand Tools
  • Eligible For Holley Contingency Programs
Out of Stock
C$480.99Was C$524.28 Save 8%
View
LS High-Mount A/C Accessory Drive Kit
  • INCLUDES THE FOLLOWING ITEMS
  • 97-151 - TENSIONER ASSEMBLEY, LS
  • 20-133 - LS A/C BRACKET KIT PASSENGER SIDE
Out of Stock
C$1,707.99Was C$1,861.71 Save 8%
View
LS High-Mount A/C Accessory Drive Kit
  • INCLUDES THE FOLLOWING ITEMS
  • 20-134 - LS A/C BRACKET KIT PASSENGER SIDE
  • 97-151 - TENSIONER ASSM W/GROOVED PULLEY
Out of Stock
C$1,963.99Was C$2,140.75 Save 8%
View
LS Valve Cover Adapter Plates for 64 vehicles
  • Constructed of Cast Aluminum
  • Available in three finishes (Natural Cast, Black Painted, and Polished Finish)
  • Allows installation of LS style valve covers onto Chevy small block engines
Out of Stock
C$343.99Was C$374.95 Save 8%
View
Replacement Windage Tray for Gen III Oil Pans
  • Replacement Windage Tray for 302-60, 302-60BK, 302-61, 302-61BK, 302-63, 302-63BK, 302-75, 302-75BK, 302-76, and…
Out of Stock
C$5.99Was C$6.53 Save 8%
View
RetroFilter Drive-By-Wire Air Cleaner - 14-Inch Diameter
  • Available in Black and Chrome finishes
  • Adapts to LS style drive-by-wire throttle bodies found on the LS2, LS3, LS7, etc.
  • Stamped aluminum lid and base for optimal durability and light weight
Out of Stock
C$418.99Was C$456.70 Save 8%
View
RetroFit 525 LPH Fuel Pump Kit
  • Genuine Holley Quality Parts
  • Flows 525 liters per hour
  • New line included
Out of Stock
C$532.99Was C$580.96 Save 8%
View
RZR Replacement Pre-Filter Kit
  • Direct Replacement
  • Ensures pump does not become contaminated with debris from fuel tank
  • Designed to clamp directly into pump inlet
Out of Stock
C$37.99Was C$41.41 Save 8%
View
Single Plane EFI Intake - GM LS7
  • Weight - 11.5 lbs.
  • 4150 Square bore flange
  • 2500-7000 RPM power band
Out of Stock
C$681.99Was C$743.37 Save 8%
View
Ultra Double Pumper Carburetor for 578 vehicles
  • Factory preset electric choke for easy startups
  • Mechanical secondaries for awesome tire turning performance
  • Aluminum construction for a 43% weight savings
Out of Stock
C$1,574.99Was C$1,716.74 Save 8%
View
Vintage Finned Valve Cover - "Holley" Script for Chevrolet, GMC and Pontiac
  • Designed to fit all Small Block Chevy applications with center bolt style cylinder heads – polished mounting hardware…
  • Die-cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and…
  • Emissions compliant valve covers include pre-installed internal oil baffles as well as an oil fill plug and PCV grommet
Out of Stock
C$563.99Was C$614.75 Save 8%
View
Marine Avenger Carburetor
  • All aluminum construction
  • J-Style Vent Tubes
  • Meets Coast Guard Specifications
Out of Stock
C$1,040.99Was C$1,134.68 Save 8%
View
24" x 15" HydraMat®, Rectangle
  • Works with Alcohol, Ethanol, Methanol, and E-85 fuels
  • Works with 2-cycle oil blends as high as 20:1
  • Not for use with diesel fuels
Out of Stock
C$1,241.99Was C$1,353.77 Save 8%
View
850CFM Ultra XP Carburetor
  • E85 specific calibration
  • Stainless steel throttle plates
  • Includes notched float and jet extensions
Out of Stock
C$1,826.99Was C$1,991.42 Save 8%
View
Accelerator Pump Cover
  • Genuine Holley Quality Parts
Out of Stock
C$101.99Was C$111.17 Save 8%
View
Base Gasket
  • Fits Holley Model 4150™ and Model 4160™
  • 1 9/16" Throttle Bore
  • 1/4" Thick
Out of Stock
C$77.99Was C$85.01 Save 8%
View
De-choke Linkage
  • Genuine Holley Quality Parts
Out of Stock
C$13.99Was C$15.25 Save 8%
View
Diecast In-Tank RetroFit Fuel Module Returnless System
  • The easiest way to convert your vehicle to an in-tank, EFI fuel system
  • ¼” NPT ports for a wide variety of plumbing options
  • Optional roll over valve available
Out of Stock
C$1,200.99Was C$1,309.08 Save 8%
View
Fuel Hose Kit
  • Billet Construction
  • Flows Up To 130 Gallons Per Hour
  • Supplied w/.1250 in. NPT Female Port
Out of Stock
C$157.99Was C$172.21 Save 8%
View
Fuel Hose Kit
  • Billet Construction
  • Flows Up To 130 Gallons Per Hour
  • Supplied w/.1250 in. NPT Female Port
Out of Stock
C$193.99Was C$211.45 Save 8%
View
Gen 3 Ultra Dominator Carburetor for 578 vehicles
  • Designed for use on Drag race, Pro Street, or any high horsepower engines
  • Calibrations optimized for today's larger race engines and new fuels
  • Contoured hex head squirter screws for streamlined airflow
Out of Stock
C$2,770.99Was C$3,020.38 Save 8%
View
GM Licensed Valve Cover - Muscle Series - SBC - Center Bolt for Chevrolet, GMC and Pontiac
  • Features clean, modern styling with high definition “Chevrolet and Bowtie” logo
  • Die-cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and…
  • Emissions compliant valve covers include pre-installed internal oil baffles as well as an oil fill plug and PCV grommet
Out of Stock
C$663.99Was C$723.75 Save 8%
View
LS Carbureted Manifold 2x4 Dual Plane LS3/L92
  • Perfect for any street/performance, muscle car or street rod enthusiast
  • Power band from 1500-7000rpm
  • Cast aluminum construction
Out of Stock
C$977.99Was C$1,066.01 Save 8%
View
LS/LT High-Mount Accessory Drive Bracket
  • The most cost effective LS bracket solution on the market!
  • Simple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets
  • A/C bracket accepts GM R4 compressor (Sanden version now available)
Out of Stock
C$1,040.99Was C$1,134.68 Save 8%
View
LS Valley Cover with Oil Fill - Natural Billet for 55 vehicles
  • Precision manufactured from billet aluminum with a modern, race inspired, trussed design
  • Available for GM LS1/LS6 (10 bolt) and LS2/LS3/LS7/LSX (11 bolt) engine applications
  • All necessary gaskets and upgraded mounting hardware sold separately
Out of Stock
C$465.99Was C$507.93 Save 8%
View
Marine Carb Renew Kits
  • Contains all parts and gaskets necessary to restore your marine carburetor to like new performance
  • Detailed instructions included
Out of Stock
C$106.99Was C$116.62 Save 8%
View
Marine Carburetor - Aluminum
  • J-Style Vent Tubes
  • Meets Coast Guard Specifications
  • Power valve blow-out protection
Out of Stock
C$1,205.99Was C$1,314.53 Save 8%
View
METERING BLOCK KIT
  • Replacement Primary Metering Block for Holley 2300 Series 4412 Carburetors
  • Constructed of Cast Zinc for increased durability
Out of Stock
C$135.99Was C$148.23 Save 8%
View
Precision-Flow LS7 style Fuel Injectors (90 lb/hr) - Set of 8
  • Flow matched to 2%/Consistent fueling from cylinder to cylinder
  • Multi-point Dynamic Flow Testing/Ensures that the injectors deliver the required fuel flow throughout their operating…
  • Excellent Fuel Atomization/Maximizes fuel efficiency for clean, complete combustion
Out of Stock
C$915.99Was C$998.43 Save 8%
View
Red, Blue, or Black Competition Electric Fuel Pumps Service Kit
  • Service kit for Holley Red, Blue, or Black Competition Electric Fuel Pumps
  • Works for both Automotive and Marine Pumps
  • Full kit including new Rotor, Vanes, Gaskets, Springs, and Diaphragm
Out of Stock
C$65.99Was C$71.93 Save 8%
View
Replacement Main Body
  • Main bodies are factory assembled and kit includes new gaskets to complete the installation
  • Simple installation with common hand tools that you already have in your shop
  • Main bodies are available for our most popular carburetor models
Out of Stock
C$80.99Was C$88.28 Save 8%
View
Replacement Main Body
  • Main bodies are factory assembled and kit includes new gaskets to complete the installation
  • Simple installation with common hand tools that you already have in your shop
  • Main bodies are available for our most popular carburetor models
Out of Stock
C$334.99Was C$365.14 Save 8%
View
RetroFit 255 LPH Fuel Pump Kit
  • Genuine Holley Quality Parts
  • Hose included
  • Perfect fit
Out of Stock
C$416.99Was C$454.52 Save 8%
View
Secondary Metering Plate
  • Genuine Holley Quality Parts
Out of Stock
C$63.99Was C$69.75 Save 8%
View
SPE-9409 Spectre Universal Tube
  • Polished aluminum finish
  • Grade 6063 aluminum
  • Can extend intake as far as needed
Out of Stock
C$21.99Was C$23.97 Save 8%
View