Trade prices for dealers.

0

Engine: 115,363 Results

In stock
SPECIAL ORDER AEM DryFlow Fltr
  • Engineered to deliver enhanced horsepower & acceleration for a more exhilarating driving experience every time you hit…
  • Features a performance-focused filter top that maximizes incoming airflow, helping your engine breathe deeper and run…
  • Supported by AEM’s trusted warranty, providing long-lasting confidence and reliability for enthusiasts who demand…
Out of Stock
C$115.19Was C$125.56 Save 8%
View
Thruster Throttle Booster for Chevrolet and Cadillac
  • Reduce Lag Time And Increase The Vehicle Acceleration
  • Use The Control Knob To Change Performance On The Fly
  • Built For Off Road Fully Waterproof Design
Out of Stock
C$188.99Was C$206.00 Save 8%
View
Diecast In-Tank RetroFit Fuel Module w/Return
  • The easiest way to convert your vehicle to an in-tank, EFI fuel system
  • ¼” NPT ports for a wide variety of plumbing options
  • Optional roll over valve available
Out of Stock
C$1,081.99Was C$1,179.37 Save 8%
View
G-BODY FUEL SYSTEM KIT for 12 vehicles
  • Prepares your 1978-1988 GM G-Body with a bullet proof fuel system for any EFI conversion
  • Contains a wide variety parts and accessories going up to the engine for a complete fuel system kit
  • Highly detailed installation instructions to guide you, step by step, along the installation process
Out of Stock
C$1,536.99Was C$1,675.32 Save 8%
View
Godzilla Oil Pan Baffle - Race
  • Includes baffle only - use w/ Holley Godzilla Oil Pan from Accessory Drive Kits 20-320, 20-320BK, 20-340, and 20-340BK
  • Hinge Door Baffle Design
  • Can be used with factory windage tray
Out of Stock
C$193.99Was C$211.45 Save 8%
View
Replacement Timing Cover
  • Replacement Timing Cover for Mid-Mount Accessory Drive Systems 20-290BK and 20-292BK
Out of Stock
C$1,024.99Was C$1,117.24 Save 8%
View
14" Round Finned Air Cleaner
  • 14” diameter, die-cast aluminum construction
  • Natural Cast finish w/ 3" premium filter element
  • Includes carburetor gasket and all mounting hardware necessary for installation
Out of Stock
C$360.99Was C$393.48 Save 8%
View
G-BODY RETURNLESS FUEL SYSTEM KIT for 12 vehicles
  • Prepares your 1978-1988 GM G-Body with a bullet proof fuel system for conversion to EFI
  • Pump gas and E85 compatible Fuel Plumbing Kit in a box, ready for whatever engine you throw at it
  • Includes 20ft of 6AN nylon braided hose, enough to go from the tank to the fuel rails
Out of Stock
C$1,365.99Was C$1,488.93 Save 8%
View
Replacement Damper - Non VVT
  • Replacement Damper for Mid-Mount Accessory Drive Systems 20-290, 20-290BK, 20-292, and 20-292BK
  • Overall Height: 5.23-inches
  • Fits non-VVT Engines
Out of Stock
C$597.99Was C$651.81 Save 8%
View
Replacement Damper - VVT
  • Replacement Damper for Mid-Mount Accessory Drive Systems 20-291, 20-291BK, 20-293, and 20-293BK
  • Overall Height: 4.76-inches
  • Fits VVT Engines
Out of Stock
C$682.99Was C$744.46 Save 8%
View
Replacement Plug and Adapter Kit
  • Replacement Fittings and Plugs for Gen III Hemi Mid-Mount Accessory Drive System
Out of Stock
C$72.99Was C$79.56 Save 8%
View
3x2 Air Cleaner Gasket
  • 3x2 Carb / Air Cleaner Gasket
Out of Stock
C$49.99Was C$54.49 Save 8%
View
Fox Body Fuel System Kits for 1986-1993 Ford Mustang
  • Prepares your 1986-1993 Ford Fox Body Mustangs with a bullet proof fuel system for any engine application
  • Simplifies your fuel system with direct replacement components while still maintaining an OEM-like appearance
  • Highly detailed installation instructions to guide you, step by step, along the installation process
Out of Stock
C$1,908.99Was C$2,080.80 Save 8%
View
Replacement Damper
  • Holley Replacement Damper
Out of Stock
C$1,280.99Was C$1,396.28 Save 8%
View
8" x 3" HydraMat®, Rectangle
  • HydraMats are also available in other sizes and shapes to fit a variety of stock fuel tanks and/or race fuel cells
Out of Stock
C$385.99Was C$420.73 Save 8%
View
Diecast In-Tank RetroFit Fuel Module w/Return
  • The easiest way to convert your vehicle to an in-tank, EFI fuel system
  • ¼” NPT ports for a wide variety of plumbing options
  • Optional roll over valve available
Out of Stock
C$1,064.99Was C$1,160.84 Save 8%
View
Replacement Hardware Kit
  • Genuine Holley Quality Parts
  • Replacement Hardware for SBF 302 Hi-Ram Manifolds
Out of Stock
C$139.99Was C$152.59 Save 8%
View
Flat Base Air Cleaner 10" Black
  • Traditional Look open element style
  • Black reusable gauze filter element
  • Holley logo stamped into the top
Out of Stock
C$114.99Was C$125.34 Save 8%
View
Oil Pan Kit- Fabricated
  • Trap door baffles keep oil under control during hard acceleration
  • Pans available in additional finishes
  • Kit includes Pan, Pump Pickup, Pan Gasket, and pan mounting bolt kit
Out of Stock
C$368.99Was C$402.20 Save 8%
View
SPE-2369 Premium Clear Fuel Filter
  • Clear housing for easy viewing
  • For non-fuel injected applications
  • Filters down to 40 microns
Out of Stock
C$25.99Was C$28.33 Save 8%
View
Oil Dipstick - Ford 7.3L Godzilla Engine
  • Tucked in tighter than OE dipstick for cleaner look
  • Can be used with other oil pans (but not recommended) - be sure to measure and mark to ensure correct oil level
  • Will not interfere with low hood clearance like the stock dipstick and tube.
Out of Stock
C$86.99Was C$94.82 Save 8%
View
SPE-8756 Coupler Reducer
  • Coupler is 3 inches long
  • Made from blue PVC
  • Reducer, PVC, blue
Out of Stock
C$14.99Was C$16.34 Save 8%
View
Regulator Rebuild Kit
  • Fuel Pressure regulator rebuild kit for Holley 12-840 regulator
  • Includes diaphragm and spring
Out of Stock
C$83.99Was C$91.55 Save 8%
View
Renew Kit Carburetor Rebuild Kit
  • Step-By-Step Instructions
  • Detailed Tuning Guide
  • Competitively Priced
Out of Stock
C$80.99Was C$88.28 Save 8%
View
Fuel Pressure Gauge
  • 1.5 in. Diameter
  • Chromed Steel Case
  • 0.125 in. NPT Brass Fitting
Out of Stock
C$99.99Was C$108.99 Save 8%
View
Fuel Pressure Gauge
  • 1.5 in. Diameter
  • Chromed Steel Case
  • 0.125 in. NPT Brass Fitting
Out of Stock
C$160.99Was C$175.48 Save 8%
View
Fuel Pump Check Valve Kit
  • Check valve kit for 12-150 fuel pump
  • Includes lower gasket, check valve, spring and inlet screen filter
Out of Stock
C$83.99Was C$91.55 Save 8%
View
GM Muscle Series Air Cleaner - Satin Black Machined
  • Features clean, modern styling with high definition “Chevrolet and Bowtie” logo
  • Fits Holley 4150 and 4160 and other carburetors with 5.125” diameter neck
  • Die-cast aluminum lid construction
Out of Stock
C$330.99Was C$360.78 Save 8%
View
Oil Pump Assembly - 7.3L Ford Godzilla
  • Higher spring pressure available
  • Replaces damaged oil pump when using Holley's Godzilla accessory drive
  • For your convenience, 302-86 has been preinstalled
Out of Stock
C$274.99Was C$299.74 Save 8%
View
P.C.V. Grommet
  • Genuine Holley Quality Parts
Out of Stock
C$21.99Was C$23.97 Save 8%
View
Replacement Damper
  • Holley Replacement Damper
Out of Stock
C$1,280.99Was C$1,396.28 Save 8%
View
Billet Aluminum Throttle Cable Bracket
  • Billet Aluminum
  • Throttle Cable Bracket for LOKAR Style Cable
  • 4500 Series Carburetors
Out of Stock
C$313.99Was C$342.25 Save 8%
View
Double Pumper Carburetor for 578 vehicles
  • Shiny finish for good looks
  • Optimized street/strip calibration that works out-of-the-box
  • Mechanical secondaries for awesome tire turning performance
Out of Stock
C$1,120.99Was C$1,221.88 Save 8%
View
LS COOLING MANIFOLD RAW
  • Genuine Holley Quality Parts
Out of Stock
C$768.99Was C$838.20 Save 8%
View
15" x 15" HydraMat®, Cross
  • Works with Alcohol, Ethanol, Methanol, and E85 fuels.
  • Works with 2-cycle oil blends as high as 20:1
  • Not for use with diesel fuels
Out of Stock
C$832.99Was C$907.96 Save 8%
View
Cast Aluminum Rear Sump Oil Pan - Ford Coyote Swap - Black
  • Oil pan fits 2011-2017 Gen I and II Coyote engines.
  • Provides 2 Bosses for drain-back for turbo applications (Unmachined)
  • Traditional high-quality cast aluminum appearance with clean exterior styling
Out of Stock
C$977.99Was C$1,066.01 Save 8%
View
Complete GM Gen V LT, L83, L84, L86, and L87 Accessory Drive System
  • Works with LT Truck Harmonic Balancer (often already on donor engine)
  • Cost Effective and Proven Solution
  • Includes Water Pump, Installation Kit, Water Pump Spacers, Bracket Spacers, Wiring Harness, and Accessories
Out of Stock
C$3,800.99Was C$4,143.08 Save 8%
View
GEN I COIL SPACERS
  • .550" Height
  • Great for turbo builds or other applications where more ignition coil clearance is needed!
Out of Stock
C$16.99Was C$18.52 Save 8%
View
GM Licensed Valve Cover - Muscle Series - SBC - Center Bolt for Chevrolet, GMC and Pontiac
  • Features clean, modern styling with high definition “Chevrolet and Bowtie” logo
  • Die-cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and…
  • Emissions compliant valve covers include pre-installed internal oil baffles as well as an oil fill plug and PCV grommet
Out of Stock
C$681.99Was C$743.37 Save 8%
View
Powercharger Air Cleaner
  • Air Cleaner Assembly
  • Highly polished aluminum
  • Includes POWER SHOT filters
Out of Stock
C$717.99Was C$782.61 Save 8%
View
Renew Kit Carburetor Rebuild Kit
  • Step-By-Step Instructions
  • Detailed Tuning Guide
  • Competitively Priced
Out of Stock
C$132.99Was C$144.96 Save 8%
View
Replacement Timing Cover
  • Replacement Timing Cover for Mid-Mount Accessory Drive Systems 20-291 and 20-293
Out of Stock
C$1,043.99Was C$1,137.95 Save 8%
View
Fuel Filter Element and O-ring Kit
  • Replacement filter element for 100 GPH Holley billet fuel filter
  • Includes 100 micron stainless steel woven mesh filter element and O-rings
Out of Stock
C$42.99Was C$46.86 Save 8%
View
Valve Covers - Muscle Series - Finned - SBC - Natural
  • Designed to fit all 1958-86 Small Block Chevy engines with perimeter bolt patterns
  • Standard height valve cover with pre-installed internal oil baffles
  • Factory style twist-in oil fill cap, round Holley emblem, and square oil fill and PCV grommets included
Out of Stock
C$606.99Was C$661.62 Save 8%
View
460 GPH VR Series Billet Fuel Filter
  • Female 12AN O-ring inlet and outlet
  • 100 micron depth media element
  • Measures 8.75” long and 2” diameter
Out of Stock
C$330.99Was C$360.78 Save 8%
View
650 CFM Double Pumper Carburetor
  • Optimized street/strip calibration that works out-of-the-box
  • Mechanical secondaries for awesome tire turning performance
  • Dual feed fuel inlets for constant high volume fuel delivery
Out of Stock
C$1,140.99Was C$1,243.68 Save 8%
View
Cast Aluminum Timing Chain Cover
  • Accommodates both stock and aftermarket water pumps
  • Includes high quality gasket, corrosion resistant E-coated hardware, and dowel pins
  • Offered in Natural Cast and Satin Black finishes
Out of Stock
C$198.99Was C$216.90 Save 8%
View
Fuel Cell Return Fitting Kit
  • Maintains consistent fuel pressure
  • Comes with fitting, hose and clamp
  • Pump gas and E85 compatible
Out of Stock
C$60.99Was C$66.48 Save 8%
View
Fuel Line
  • Black
  • AN fittings
  • Braided Stainless Hose
Out of Stock
C$302.99Was C$330.26 Save 8%
View
LS Steam Tube Kit for Chevrolet, GMC and Pontiac
  • Eliminates trapped air, hot spots, and overheating
  • Adjustable pivoting steam vent adapters
  • Available in front or four corner pumbing options
Out of Stock
C$300.99Was C$328.08 Save 8%
View
Marine Renew Kit
  • Contains all parts and gaskets necessary to restore your marine carburetor to like new performance
  • Detailed instructions included
Out of Stock
C$135.99Was C$148.23 Save 8%
View
Replacement Radiator, 2.0L for Subaru and Saab
  • Ideal replacement for an aged, clogged, or leaking stock radiator
  • Functions with all stock engine bay equipment
  • Mishimoto Lifetime Warranty
Out of Stock
C$365.99Was C$398.93 Save 8%
View
Base Gasket w/ Studs
  • 1/4" Thick
  • 1 1/2" Throttle Bore
  • Includes Carb Studs
Out of Stock
C$55.99Was C$61.03 Save 8%
View
Carburetor Throttle Lever Extension
  • For Accelerator Cable
  • Relocates Mounting Point
  • For Square Flange Carburetors
Out of Stock
C$103.99Was C$113.35 Save 8%
View
GEN V COIL SPACERS
  • .575" Height
  • Great for turbo builds or other applications where more ignition coil clearance is needed!
Out of Stock
C$19.99Was C$21.79 Save 8%
View
LS Valley Cover with Oil Fill - Black Billet for 52 vehicles
  • Precision manufactured from billet aluminum with a modern, race inspired, trussed design
  • Available for GM LS1/LS6 (10 bolt) and LS2/LS3/LS7/LSX (11 bolt) engine applications
  • All necessary gaskets and upgraded mounting hardware sold separately
Out of Stock
C$510.99Was C$556.98 Save 8%
View
LT COOLING MANIFOLD BLACK
  • Genuine Holley Quality Parts
Out of Stock
C$1,206.99Was C$1,315.62 Save 8%
View
SECONDARY DIAPHRAGM KIT
  • Secondary Diaphragm Kit; rod length is 1.97"
Out of Stock
C$47.99Was C$52.31 Save 8%
View
Billet Aluminum Throttle Cable Bracket
  • Billet Aluminum
  • Throttle Cable Bracket for GM Style Cable
  • Edelbrock Performer and Carter AFB model carburetors
Out of Stock
C$194.99Was C$212.54 Save 8%
View
Cast Aluminum Timing Chain Cover
  • Accommodates both stock and aftermarket water pumps
  • Includes high quality gasket, corrosion resistant E-coated hardware, and dowel pins
  • Offered in Natural Cast and Satin Black finishes
Out of Stock
C$157.99Was C$172.21 Save 8%
View
Classic Double Pumper Carburetor for 578 vehicles
  • Optimized street/strip calibration that works out-of-the-box
  • Electric choke for precise cold start control
  • Mechanical secondaries for awesome tire turning performance
Out of Stock
C$1,579.99Was C$1,722.19 Save 8%
View
DIRECT MOUNT FUEL PULSE DAMPER
  • Fittings included for damper/regulator’s and direct mount dampers
  • Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
  • Assembled and tested in the USA
Out of Stock
C$199.99Was C$217.99 Save 8%
View
Fox Body Fuel System Kits for 1986-1993 Ford Mustang
  • Prepares your 1986-1993 Ford Fox Body Mustangs with a bullet proof fuel system for any engine application
  • Simplifies your fuel system with direct replacement components while still maintaining an OEM-like appearance
  • Highly detailed installation instructions to guide you, step by step, along the installation process
Out of Stock
C$2,400.99Was C$2,617.08 Save 8%
View
GM Gen V LT Road-Race Oil Pan Baffle
  • Includes baffle only - use w/ Holley Oil Pans 302-20, 302-20BK, or 302-21BK
  • Hinge Door Baffle Design
Out of Stock
C$532.99Was C$580.96 Save 8%
View
LS COOLING MANIFOLD BLACK
  • Genuine Holley Quality Parts
Out of Stock
C$832.99Was C$907.96 Save 8%
View
Marine Carb Renew Kit
  • Contains all parts and gaskets necessary to restore your marine carburetor to like new performance
  • Detailed instructions included
Out of Stock
C$99.99Was C$108.99 Save 8%
View
Tensioner Assembly
  • Genuine Holley Quality Parts
Out of Stock
C$300.99Was C$328.08 Save 8%
View