Trade prices for dealers.

0

Engine: 148,601 Results

In stock
Gerotor Replacement Kit
  • Gerotor kit for 12125 and 12-150 fuel pumps
  • Includes lower gasket, wear plate, wear plate O-ring and geroter set
Out of Stock
C$262.99Was C$286.66 Save 8%
View
GM Muscle Series Air Cleaner - Satin Black Machined
  • Features clean, modern styling with high definition “Chevrolet and Bowtie” logo
  • Fits Holley 4150 and 4160 and other carburetors with 5.125” diameter neck
  • Die-cast aluminum lid construction
Out of Stock
C$400.99Was C$437.08 Save 8%
View
Hi-Ram Intake Plenum Top, 2 x 4150 - Big Block Chevy / Small Block Chevy
  • The Big Block Chevy Hi-Ram manifold is available in either a traditional Hi-Ram 105mm plenum top or with a 2 x 4150…
  • Requires the use of early type GM or small cap MSD or Holley Distributors. Not compatible with HEI distributors
  • Cast 356-T6 Aluminum Construction, Natural, Satin As-Cast Aluminum Finish
Out of Stock
C$374.99Was C$408.74 Save 8%
View
IN-LINE FUEL PULSE DAMPER
  • Fittings included for damper/regulator’s and direct mount dampers
  • Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
  • Assembled and tested in the USA
Out of Stock
C$288.99Was C$315.00 Save 8%
View
LS Carbureted Manifold 2x4 Dual Plane LS3/L92
  • Perfect for any street/performance, muscle car or street rod enthusiast
  • Power band from 1500-7000rpm
  • Cast aluminum construction
Out of Stock
C$977.99Was C$1,066.01 Save 8%
View
LS Valley Cover with Oil Fill - Natural Billet for 55 vehicles
  • Precision manufactured from billet aluminum with a modern, race inspired, trussed design
  • Available for GM LS1/LS6 (10 bolt) and LS2/LS3/LS7/LSX (11 bolt) engine applications
  • All necessary gaskets and upgraded mounting hardware sold separately
Out of Stock
C$465.99Was C$507.93 Save 8%
View
MANIFOLD-BRACKET KIT, LT4 WET-Black
  • Cast aluminum water pump manifold used in LT4 kit 20-220BK
  • Genuine Holley Quality Parts
Out of Stock
C$798.99Was C$870.90 Save 8%
View
Mid-Mount Complete Accessory System for 37 vehicles
  • SD7 A/C Compressor – Small Compact Compressor
  • Type II Power Steering Pump with Baffled Reservoir
  • No Adapters or Spacers Needed – for Easy Installation
Out of Stock
C$5,636.99Was C$6,144.32 Save 8%
View
Needle & Seat Assembly
  • Adjustable
  • 0.110" Seat Size
  • Viton tip
Out of Stock
C$337.99Was C$368.41 Save 8%
View
Off-Road Truck Avenger Carburetor for 578 vehicles
  • Gold Dichromate finish for extreme off road environments
  • Single feed fuel inlet for ease of installation
  • Factory preset electric choke for easy startups
Out of Stock
C$1,451.99Was C$1,582.67 Save 8%
View
Pro-Flo 4 EFI Upgrade Kit (from Legacy Pro-Flo to Pro-Flo 4)
  • Economical EFI System solution for users with existing legacy Edelbrock Pro Flo 1,2 or 3 EFI systems and components.
  • Simplified installation, providing all existing features of Pro Flo 4 EFI
Out of Stock
C$1,943.99Was C$2,118.95 Save 8%
View
Renew Kit Carburetor Rebuild Kit
  • Step-By-Step Instructions
  • Detailed Tuning Guide
  • Competitively Priced
Out of Stock
C$135.99Was C$148.23 Save 8%
View
SPE-42869 Breather Filter
  • Triple chrome-plated steel top and base
  • Includes grommet for quick installation
  • Includes heat shield
Out of Stock
C$35.99Was C$39.23 Save 8%
View
SPE-6932 Premium Clear Fuel Filter
  • Clear housing for easy viewing
  • For non-fuel injected applications
  • Filters down to 40 microns
Out of Stock
C$20.99Was C$22.88 Save 8%
View
SPECIAL ORDER AEM DryFlow Fltr for Jeep and Chevrolet
  • Engineered to boost horsepower and sharpen throttle response, giving your vehicle stronger, more immediate performance.
  • Proudly manufactured in the USA with high-quality materials and precision standards.
  • Will NOT void your vehicle’s warranty, performance you can install with total confidence.
Out of Stock
C$67.69Was C$73.78 Save 8%
View
Vintage Finned Valve Cover - "Holley" Script - SBC for Chevrolet, GMC and Pontiac
  • Designed to fit all Small Block Chevy applications with center bolt style cylinder heads – polished mounting hardware…
  • Die-cast aluminum construction ensures high detail and reduces the opportunity for warping of the valve cover flange and…
  • Emissions compliant valve covers include pre-installed internal oil baffles as well as an oil fill plug and PCV grommet
Out of Stock
C$440.99Was C$480.68 Save 8%
View
Out of Stock
C$991.99Was C$1,081.27 Save 8%
View
11" x 11" HydraMat®, Cross
  • Works with Alcohol, Ethanol, Methanol, and E-85 fuels
  • Works with 2-cycle oil blends as high as 20:1
  • Not for use with diesel fuels
Out of Stock
C$681.99Was C$743.37 Save 8%
View
30" x 14" HydraMat®, Rectangle
  • Works with Alcohol, Ethanol, Methanol, and E-85 fuels
  • Works with 2-cycle oil blends as high as 20:1
  • Not for use with diesel fuels
Out of Stock
C$2,000.99Was C$2,181.08 Save 8%
View
30" x 14" HydraMat®, Rectangle
  • Works with Alcohol, Ethanol, Methanol, and E-85 fuels
  • Works with 2-cycle oil blends as high as 20:1
  • Not for use with diesel fuels
Out of Stock
C$1,792.99Was C$1,954.36 Save 8%
View
770 CFM Street Avenger Carburetor
  • Vibratory polished for good looks
  • Optimized street calibration that works-out-of-the-box
  • Manual choke (Cable driven, hand operated) for precise cold start control
Out of Stock
C$904.99Was C$986.44 Save 8%
View
Alternator Relocation Kit (150amp Alternator w/bracket kit)
  • Design allows more chassis clearance for swap applications
  • Original equipment look and reliability
  • LT4 style standard 105 amp and premium 150 amp model alternator options available
Out of Stock
C$2,770.99Was C$3,020.38 Save 8%
View
Analog Style Fuel Pressure Gauge
  • LED dimmable backlit design with red pointers makes them easy to read day or night
  • All gauges are electric style and include sending units depending on gauge type
  • Spin lock ring threads to back of gauge case for simple and secure gauge mounting
Out of Stock
C$597.99Was C$651.81 Save 8%
View
Base Insulator
  • 1 3/8" Primary
  • Phenolic
  • 11/16" Thick
Out of Stock
C$138.99Was C$151.50 Save 8%
View
Diecast In-Tank RetroFit Fuel Module Returnless System
  • The easiest way to convert your vehicle to an in-tank, EFI fuel system
  • ¼” NPT ports for a wide variety of plumbing options
  • Optional roll over valve available
Out of Stock
C$1,520.99Was C$1,657.88 Save 8%
View
Diecast In-Tank RetroFit Fuel Module w/Return
  • The easiest way to convert your vehicle to an in-tank, EFI fuel system
  • ¼” NPT ports for a wide variety of plumbing options
  • Optional roll over valve available
Out of Stock
C$1,440.99Was C$1,570.68 Save 8%
View
Diecast In-Tank RetroFit Fuel Module w/Return
  • The easiest way to convert your vehicle to an in-tank, EFI fuel system
  • ¼” NPT ports for a wide variety of plumbing options
  • Optional roll over valve available
Out of Stock
C$880.99Was C$960.28 Save 8%
View
Emulsion Jet
  • .020" Jet Size
  • 6/32 Thread
  • 2 per Package
Out of Stock
C$20.99Was C$22.88 Save 8%
View
Fuel Cell EFI Pump Module Assembly
  • Update your fuel cell to EFI the easy way!
  • Designed to drop right into your existing 6 bolt flange fuel cell
  • Supports up to 875 EFI or 1100 Carb HP (@ 60 PSI at 13.5 Volts / 16.9 AMP Draw)
Out of Stock
C$1,081.99Was C$1,179.37 Save 8%
View
Fuel Pressure Gauge
  • 1.5 in. Diameter
  • Chromed Steel Case
  • Includes Elbow Fitting
Out of Stock
C$130.99Was C$142.78 Save 8%
View
Hi-Ram Lower Manifold - GM LS3/L92
  • Plenum Top Gasket Type – 3/32” Round O-ring Cord
  • Port Size – 2.49” Height x 1.21” Wide
  • Mounting Flange Gasket Type – Standard LS3 Molded O-Ring
Out of Stock
C$1,451.99Was C$1,582.67 Save 8%
View
Hi-Ram Lower Manifold - GM LS7
  • Mounting Flange Gasket Type – Standard LS3 Molded O-Ring
  • Plenum Top Gasket Type – 3/32” Round O-ring Cord
  • Port Size – 2.49” Height x 1.21” Wide
Out of Stock
C$1,451.99Was C$1,582.67 Save 8%
View
HP Main Body Retro Fit Kit
  • All Necessary Parts Are Included
  • Simple Installation With Common Hand Tools
  • Eligible For Holley Contingency Programs
Out of Stock
C$480.99Was C$524.28 Save 8%
View
LS/LT High-Mount Accessory Drive Bracket
  • The most cost effective LS bracket solution on the market!
  • Simple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets
  • A/C bracket accepts GM R4 compressor (Sanden version now available)
Out of Stock
C$1,040.99Was C$1,134.68 Save 8%
View
LS Valley Cover with Oil Fill - Black Billet for 55 vehicles
  • Precision manufactured from billet aluminum with a modern, race inspired, trussed design
  • Available for GM LS1/LS6 (10 bolt) and LS2/LS3/LS7/LSX (11 bolt) engine applications
  • All necessary gaskets and upgraded mounting hardware sold separately
Out of Stock
C$488.99Was C$533.00 Save 8%
View
Power Steering Add-on System for LT4 Wet Sump Engines
  • Add-on power steering to the OE GM accessory drive systems
  • P/S hard line adapters included
  • Available LT4/5 dry-sump & LT4 wet-sump applications
Out of Stock
C$2,560.99Was C$2,791.48 Save 8%
View
Regulator Rebuild Kit
  • Fuel Pressure regulator rebuild kit for Holley 12-846, and 12846ERL regulators
  • Includes diaphragm and spring
Out of Stock
C$99.99Was C$108.99 Save 8%
View
Replacement Fuel Bowl Kit
  • shiny finish
  • externally adjusted floats
Out of Stock
C$129.99Was C$141.69 Save 8%
View
RetroFilter Drive-By-Wire Air Cleaner - 14-Inch Diameter
  • Available in Black and Chrome finishes
  • Adapts to LS style drive-by-wire throttle bodies found on the LS2, LS3, LS7, etc.
  • Stamped aluminum lid and base for optimal durability and light weight
Out of Stock
C$418.99Was C$456.70 Save 8%
View
RetroFit 525 LPH Fuel Pump Kit
  • Genuine Holley Quality Parts
  • Flows 525 liters per hour
  • New line included
Out of Stock
C$532.99Was C$580.96 Save 8%
View
SPE-9519 Spectre Universal Tube
  • Many applications have a polished aluminum finish
  • Several applications are mandrel bent
  • Grade 6063 polished aluminum
Out of Stock
C$27.99Was C$30.51 Save 8%
View
Tensioner Cover Black
  • Genuine Holley Quality Parts
Out of Stock
C$222.99Was C$243.06 Save 8%
View
Ultra Double Pumper Carburetor for 578 vehicles
  • Factory preset electric choke for easy startups
  • Mechanical secondaries for awesome tire turning performance
  • Aluminum construction for a 43% weight savings
Out of Stock
C$1,574.99Was C$1,716.74 Save 8%
View
Ultra HP Mechanical Fuel Pump Replacement Gasket Kit
  • Complete gasket kit for Holley -30,-35 and -40 Ultra HP mechanical fuel pumps
  • Replacement gaskets for Ultra HP mechanical fuel pumps 12-327-30, 12-327-35, 12-454-30, 12-454-35, 12-454-40, 12-289-30…
  • Kit includes valve body to bottom gasket, rubber pulsator, engine mounting gasket, breather vent, and hose barb.
Out of Stock
C$94.99Was C$103.54 Save 8%
View
Ultra XP Carburetor for 578 vehicles
  • Aluminum Construction (saves 4.5 lbs - 38% weight savings)
  • Mechanical Secondaries for perfect off the line launches
  • Includes notched float and jet extensions
Out of Stock
C$2,219.99Was C$2,419.79 Save 8%
View
Windage Tray - Ford 7.3L Godzilla
  • Used with Holley Godzilla Oil Pan from Accessory Drive Kits 20-320, 20-320BK, 20-340, and 20-340BK
Out of Stock
C$95.99Was C$104.63 Save 8%
View
350 CFM Performance 2BBL Carburetor
  • Manual (Cable driven, hand operated) choke for precise cold start control
  • 30cc accelerator pump for additional fuel under initial acceleration
  • Power valve blow-out protection
Out of Stock
C$1,179.99Was C$1,286.19 Save 8%
View
500 CFM Performance 2BBL Carburetor for 117 vehicles
  • Aluminum construction and vibratory polished for good looks
  • 50cc accelerator pump for additional fuel under initial acceleration
  • Power valve blow-out protection
Out of Stock
C$721.99Was C$786.97 Save 8%
View
Base Gasket
  • 1 3/8" Primary
  • 2" Secondary
  • 1/4" Thick
Out of Stock
C$83.99Was C$91.55 Save 8%
View
Base Gasket
  • 1 13/16" Throttle Bore
  • 1/16" Thick
  • Fits Holley Model 2300™
Out of Stock
C$29.99Was C$32.69 Save 8%
View
Carbureted Fuel Pressure Regulator
  • Adjustable fuel regulation from 4-1/2 to 9 psi
  • .437" (7/16") restriction
  • Alcohol compatible
Out of Stock
C$320.99Was C$349.88 Save 8%
View
Classic HP Carburetor - Aluminum
  • Optimized race calibration
  • Stainless steel throttle plates
  • Calibrated for gasoline
Out of Stock
C$1,732.99Was C$1,888.96 Save 8%
View
Emulsion Jet
  • .000" Jet Size
  • 6/32 Thread
  • 2 per Package
Out of Stock
C$32.99Was C$35.96 Save 8%
View
Emulsion Jet
  • 2 per Package
  • 6/32 Thread
  • .052" Jet Size
Out of Stock
C$20.99Was C$22.88 Save 8%
View
Fuel Bowl Screw & Gasket Kit
  • One 8R1908-1 Secondary Metering Plate Gasket
  • Four Secondary Fuel Bowl Screws
  • 4 Nylon Bowl Screw Gaskets
Out of Stock
C$31.99Was C$34.87 Save 8%
View
Fuel Cell EFI Pump Module Assembly
  • Update your fuel cell to EFI the easy way!
  • Designed to drop right into your existing 6 bolt flange fuel cell
  • Modules are available with 255 or 450 LPH fuel pumps in single pump configurations
Out of Stock
C$960.99Was C$1,047.48 Save 8%
View
Fuel Filter
  • Bi-Directional Filters
  • Made Of Billet Aluminum
  • Sintered-Bronze 40 Micron Element
Out of Stock
C$14.99Was C$16.34 Save 8%
View
Hi-Ram Lower Manifold - GM LS1/LS2/LS6-Black
  • Port Size – 2.49” Height x 1.21” Wide
  • Plenum Top Gasket Type – 3/32” Round O-ring Cord
  • Mounting Flange Gasket Type – Standard LS3 Molded O-Ring
Out of Stock
C$1,360.99Was C$1,483.48 Save 8%
View
Out of Stock
C$2,762.99Was C$3,011.66 Save 8%
View
HYDRAMAT (3X15) RECT - 19MM OUTLET OFFSET
  • Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions
  • Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump
  • Can be folded and compressed for easy installation through a variety of fuel cell openings
Out of Stock
C$454.99Was C$495.94 Save 8%
View
Inlet Needle Steel
  • Adjustable
  • Steel Inlet Needle
  • Operation Is Simple
Out of Stock
C$154.99Was C$168.94 Save 8%
View
LS High-Mount A/C Accessory Drive Kit
  • INCLUDES THE FOLLOWING ITEMS
  • 97-151 - TENSIONER ASSEMBLEY, LS
  • 20-133 - LS A/C BRACKET KIT PASSENGER SIDE
Out of Stock
C$1,878.99Was C$2,048.10 Save 8%
View
LS Valve Cover Adapter Plates for 64 vehicles
  • Constructed of Cast Aluminum
  • Available in three finishes (Natural Cast, Black Painted, and Polished Finish)
  • Allows installation of LS style valve covers onto Chevy small block engines
Out of Stock
C$343.99Was C$374.95 Save 8%
View
Mid-Mount Complete Accessory System for 37 vehicles
  • SD7 A/C Compressor – Small Compact Compressor
  • Type II Power Steering Pump with Baffled Reservoir
  • No Adapters or Spacers Needed – for Easy Installation
Out of Stock
C$5,131.99Was C$5,593.87 Save 8%
View
Regulator Rebuild Kit
  • Fuel Pressure regulator rebuild kit for Holley 12-848 & 12848ERL regulators
  • Includes diaphragm and spring
Out of Stock
C$103.99Was C$113.35 Save 8%
View
Replacement Main Body
  • Main bodies are factory assembled and kit includes new gaskets to complete the installation
  • Simple installation with common hand tools that you already have in your shop
  • Main bodies are available for our most popular carburetor models
Out of Stock
C$426.99Was C$465.42 Save 8%
View