Trade prices for dealers.

0

Fuel System: 7,383 Results

In stock
FUEL CELL VENT KIT
  • Complete kit with 6 ft of 10AN Nylon Braided hose, all fittings, rollover valve, bulkhead and breather filter
Out of Stock
C$274.99Was C$299.74 Save 8%
View
Fuel Line
  • The fuel lines are 9.75” long (standard fuel line is 9.50”)
  • Increased fuel volume of each bowl extends length by .125” per bowl (.250” overall).
Out of Stock
C$416.99Was C$454.52 Save 8%
View
IN-LINE FUEL PULSE DAMPER
  • Fittings included for damper/regulator’s and direct mount dampers
  • Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
  • Assembled and tested in the USA
Out of Stock
C$288.99Was C$315.00 Save 8%
View
Float
  • Genuine Holley Quality Parts
Out of Stock
C$34.99Was C$38.14 Save 8%
View
SPE-2955 Spectre Dual Feed Fuel Line Kit
  • Triple chrome plated hose fitting
  • Includes hoses and clamps
  • Engineered for optimum fit and function
Out of Stock
C$194.99Was C$212.54 Save 8%
View
Billet Regulator Bracket
  • Black anodized billet construction
  • Simplifies mounting Holley fuel pressure regulators
  • Included hardware for easy installation
Out of Stock
C$133.99Was C$146.05 Save 8%
View
Billet Regulator Bracket
  • Black anodized billet construction
  • Simplifies mounting Holley fuel pressure regulators
  • Included hardware for easy installation
Out of Stock
C$122.99Was C$134.06 Save 8%
View
CARBURETOR LINKAGE KIT FOR 3X2 SBC
  • Specifically designed for 3X2 Carburetor set-up
  • Kit includes 2 linkage arms, 2 nuts, 2 washers, and 2 cotter pins
Out of Stock
C$467.99Was C$510.11 Save 8%
View
Fuel Cell Rollover Valve
  • 10AN ORB port to 10AN male
  • Low-profile design
  • Pump gas and E85 compatible
Out of Stock
C$69.99Was C$76.29 Save 8%
View
Fuel Filter Element and O-ring Kit
  • Replacement filter element for 100 GPH Holley billet fuel filter
  • Includes 40 micron stainless steel woven mesh filter element and O-rings
Out of Stock
C$29.99Was C$32.69 Save 8%
View
Replacement Main Body
  • Main bodies are factory assembled and kit includes new gaskets to complete the installation
  • Simple installation with common hand tools that you already have in your shop
  • Main bodies are available for our most popular carburetor models
Out of Stock
C$407.99Was C$444.71 Save 8%
View
Replacement Pre-Filter Kit
  • Direct replacement for 50-1000, 50-1200, 50-1215, 50-1220 fuel pump filter
  • Ensures pump does not become contaminated with debris from fuel tank
  • Designed to clamp directly into pump inlet
Out of Stock
C$18.99Was C$20.70 Save 8%
View
SPE-6932 Premium Clear Fuel Filter
  • Clear housing for easy viewing
  • For non-fuel injected applications
  • Filters down to 40 microns
Out of Stock
C$20.99Was C$22.88 Save 8%
View
3" X 8" HydraMat®, Rectangle Center Outlet
  • The outlet has 6 positions to orient the HydraMat for best location in the fuel cell
  • Eliminates the need for specialty reservoirs, sumps and pick up pumps saving cost and greatly reducing complexity
  • Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump
Out of Stock
C$366.99Was C$400.02 Save 8%
View
Carburetor Throttle Shaft Conversion Kits
  • Kit Contains Primary & Secondary Throttle Shaft Assy. and eight Throttle Plate Mounting Screws.
Out of Stock
C$186.99Was C$203.82 Save 8%
View
Diecast In-Tank RetroFit Fuel Module Returnless System
  • The easiest way to convert your vehicle to an in-tank, EFI fuel system
  • ¼” NPT ports for a wide variety of plumbing options
  • Optional roll over valve available
Out of Stock
C$1,360.99Was C$1,483.48 Save 8%
View
Fuel Cell EFI Pump Module Assembly
  • Update your fuel cell to EFI the easy way!
  • Designed to drop right into your existing 12 bolt flange fuel cell
  • Module with Dual 450 LPH fuel pumps configurations
Out of Stock
C$1,360.99Was C$1,483.48 Save 8%
View
Fuel Line
  • Genuine Holley Quality Parts
Out of Stock
C$330.99Was C$360.78 Save 8%
View
Fuel Pump Rotor And Vane Kit
  • Rotor and vane kit for 12-801-1, 12-802-1, 12-812-1 and 12-815-1 fuel pumps
  • Includes lower gasket, rotor and (4) vanes
Out of Stock
C$67.99Was C$74.11 Save 8%
View
Gen 3 Dominator Air Scoop Adapter – Black
  • CNC machined from billet aluminum
  • Available in clear or black anodize for corrosion protection and good looks
  • Includes adapter and carburetor to adapter mounting hardware
Out of Stock
C$408.99Was C$445.80 Save 8%
View
Accelerator Pump Cover
  • Genuine Holley Quality Parts
Out of Stock
C$65.99Was C$71.93 Save 8%
View
Diecast In-Tank RetroFit Fuel Module Returnless System
  • The easiest way to convert your vehicle to an in-tank, EFI fuel system
  • ¼” NPT ports for a wide variety of plumbing options
  • Optional roll over valve available
Out of Stock
C$1,520.99Was C$1,657.88 Save 8%
View
Flexible In Tank Fuel Line
  • 10MM ID
  • 80MM Long
  • Compatible for all fuel types
Out of Stock
C$8.99Was C$9.80 Save 8%
View
Fuel Line Kit - 3X2 Carb set-up
  • Specifically designed for 3X2 Carburetor Set-ups
Out of Stock
C$369.99Was C$403.29 Save 8%
View
Fuel Rail Kit
  • Genuine Holley Quality Parts
  • 6AN Fuel Rails
Out of Stock
C$257.99Was C$281.21 Save 8%
View
HYDRAMAT (3X8) 19MM Center
  • Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions
  • Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump
  • Can be folded and compressed for easy installation through a variety of fuel cell openings
Out of Stock
C$375.99Was C$409.83 Save 8%
View
IN-LINE FUEL PULSE DAMPER
  • Fittings included for damper/regulator’s and direct mount dampers
  • Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
  • Assembled and tested in the USA
Out of Stock
C$288.99Was C$315.00 Save 8%
View