Trade prices for dealers.

0

Fuel System: 10,724 Results

In stock
Fuel Cell Return Fitting Kit
  • Maintains consistent fuel pressure
  • Comes with fitting, hose and clamp
  • Pump gas and E85 compatible
Out of Stock
C$60.99Was C$66.48 Save 8%
View
Renew Kit Carburetor Rebuild Kit
  • Step-By-Step Instructions
  • Detailed Tuning Guide
  • Competitively Priced
Out of Stock
C$80.99Was C$88.28 Save 8%
View
460 GPH VR Series Billet Fuel Filter
  • Female 12AN O-ring inlet and outlet
  • 100 micron depth media element
  • Measures 8.75” long and 2” diameter
Out of Stock
C$330.99Was C$360.78 Save 8%
View
Double Pumper Carburetor for 578 vehicles
  • Shiny finish for good looks
  • Optimized street/strip calibration that works out-of-the-box
  • Mechanical secondaries for awesome tire turning performance
Out of Stock
C$1,120.99Was C$1,221.88 Save 8%
View
Fuel Line
  • Genuine Holley Quality Parts
Out of Stock
C$122.99Was C$134.06 Save 8%
View
Fuel Filter Element and O-ring Kit
  • Replacement filter element for 100 GPH Holley billet fuel filter
  • Includes 100 micron stainless steel woven mesh filter element and O-rings
Out of Stock
C$42.99Was C$46.86 Save 8%
View
30 Amp Fuel Pump Relay Kit
  • Can be used with any electric fuel pump, as long as the current load is not above 30 amps
  • Quality insulated crimp connectors are provided to make the necessary splices, where required
  • Detailed instructions included
Out of Stock
C$300.99Was C$328.08 Save 8%
View
Billet Aluminum Throttle Cable Bracket
  • Billet Aluminum
  • Throttle Cable Bracket for GM Style Cable
  • Edelbrock Performer and Carter AFB model carburetors
Out of Stock
C$194.99Was C$212.54 Save 8%
View
Fox Body Fuel System Kits for 1986-1993 Ford Mustang
  • Prepares your 1986-1993 Ford Fox Body Mustangs with a bullet proof fuel system for any engine application
  • Simplifies your fuel system with direct replacement components while still maintaining an OEM-like appearance
  • Highly detailed installation instructions to guide you, step by step, along the installation process
Out of Stock
C$2,400.99Was C$2,617.08 Save 8%
View
Marine Carb Renew Kit
  • Contains all parts and gaskets necessary to restore your marine carburetor to like new performance
  • Detailed instructions included
Out of Stock
C$99.99Was C$108.99 Save 8%
View
Renew Kit Carburetor Rebuild Kit
  • Step-By-Step Instructions
  • Detailed Tuning Guide
  • Competitively Priced
Out of Stock
C$132.99Was C$144.96 Save 8%
View
Marine Renew Kit
  • Contains all parts and gaskets necessary to restore your marine carburetor to like new performance
  • Detailed instructions included
Out of Stock
C$135.99Was C$148.23 Save 8%
View
650 CFM Double Pumper Carburetor
  • Optimized street/strip calibration that works out-of-the-box
  • Mechanical secondaries for awesome tire turning performance
  • Dual feed fuel inlets for constant high volume fuel delivery
Out of Stock
C$1,140.99Was C$1,243.68 Save 8%
View
Aluminum Choke Conversion Kit
  • Electric Choke Conversion Kit Shiny Finish w/External Vacuum Source (0-4412, 0-4776, 0-4777, 0-4778, 0-4779, 0-4780…
  • Hardware included
Out of Stock
C$203.99Was C$222.35 Save 8%
View
DIRECT MOUNT FUEL PULSE DAMPER
  • Fittings included for damper/regulator’s and direct mount dampers
  • Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
  • Assembled and tested in the USA
Out of Stock
C$199.99Was C$217.99 Save 8%
View
Fuel Pump Check Valve Kit
  • Check valve kit for 12-150 fuel pump
  • Includes lower gasket, check valve, spring and inlet screen filter
Out of Stock
C$83.99Was C$91.55 Save 8%
View
15" x 15" HydraMat®, Cross
  • Works with Alcohol, Ethanol, Methanol, and E85 fuels.
  • Works with 2-cycle oil blends as high as 20:1
  • Not for use with diesel fuels
Out of Stock
C$832.99Was C$907.96 Save 8%
View
Base Gasket w/ Studs
  • 1/4" Thick
  • 1 1/2" Throttle Bore
  • Includes Carb Studs
Out of Stock
C$55.99Was C$61.03 Save 8%
View
Choke Conversion Kit
  • Genuine Holley Quality Parts
Out of Stock
C$209.99Was C$228.89 Save 8%
View
Fuel Line
  • The fuel lines are 9.75” long (standard fuel line is 9.50”)
  • Increased fuel volume of each bowl extends length by .125” per bowl (.250” overall).
Out of Stock
C$416.99Was C$454.52 Save 8%
View
Fuel Line
  • Genuine Holley Quality Parts
Out of Stock
C$330.99Was C$360.78 Save 8%
View
SECONDARY DIAPHRAGM KIT
  • Secondary Diaphragm Kit; rod length is 1.97"
Out of Stock
C$47.99Was C$52.31 Save 8%
View
Flexible In Tank Fuel Line
  • 8MM ID
  • 284MM Long
  • Compatible for all fuel types
Out of Stock
C$11.99Was C$13.07 Save 8%
View
Fuel Line Kit - 3X2 Carb set-up
  • Specifically designed for 3X2 Carburetor Set-ups
Out of Stock
C$369.99Was C$403.29 Save 8%
View
Gen 3 Dominator Air Scoop Adapter – Black
  • CNC machined from billet aluminum
  • Available in clear or black anodize for corrosion protection and good looks
  • Includes adapter and carburetor to adapter mounting hardware
Out of Stock
C$408.99Was C$445.80 Save 8%
View
In-Tank RetroFit Fuel Module 525 LPH Return Style
  • Retrofit Fuel Module 525 LPH- Return Style
  • ¼” NPT ports for a wide variety of plumbing options
  • Optional roll over valve available
Out of Stock
C$1,706.99Was C$1,860.62 Save 8%
View
THROTTLE BODY KIT
  • Replacment component for 3310-1; 3310-2; 3310-3; 3310-4
Out of Stock
C$488.99Was C$533.00 Save 8%
View
Billet Regulator Bracket
  • Black anodized billet construction
  • Simplifies mounting Holley fuel pressure regulators
  • Included hardware for easy installation
Out of Stock
C$133.99Was C$146.05 Save 8%
View
Carburetor Throttle Shaft Conversion Kits
  • Kit Contains Primary & Secondary Throttle Shaft Assy. and eight Throttle Plate Mounting Screws.
Out of Stock
C$186.99Was C$203.82 Save 8%
View
Chrome Fuel Filter
  • In-Line fuel filter for carbureted applications
  • Chrome finish
  • designed for 5/16" hose
Out of Stock
C$47.99Was C$52.31 Save 8%
View
Equipped Billet Fill Cap
  • Steel weld bung
  • 0.675" Overall Height of Weld Bung
  • Thread 1-1/2"-12
Out of Stock
C$76.99Was C$83.92 Save 8%
View