Trade prices for dealers.

0

Fuel System: 12,983 Results

In stock
650 CFM Double Pumper Carburetor
  • Optimized street/strip calibration that works out-of-the-box
  • Mechanical secondaries for awesome tire turning performance
  • Dual feed fuel inlets for constant high volume fuel delivery
Out of Stock
C$1,140.99Was C$1,243.68 Save 8%
View
Fuel Cell Return Fitting Kit
  • Maintains consistent fuel pressure
  • Comes with fitting, hose and clamp
  • Pump gas and E85 compatible
Out of Stock
C$60.99Was C$66.48 Save 8%
View
Fuel Line
  • Black
  • AN fittings
  • Braided Stainless Hose
Out of Stock
C$302.99Was C$330.26 Save 8%
View
Marine Renew Kit
  • Contains all parts and gaskets necessary to restore your marine carburetor to like new performance
  • Detailed instructions included
Out of Stock
C$135.99Was C$148.23 Save 8%
View
Base Gasket w/ Studs
  • 1/4" Thick
  • 1 1/2" Throttle Bore
  • Includes Carb Studs
Out of Stock
C$55.99Was C$61.03 Save 8%
View
Carburetor Throttle Lever Extension
  • For Accelerator Cable
  • Relocates Mounting Point
  • For Square Flange Carburetors
Out of Stock
C$103.99Was C$113.35 Save 8%
View
SECONDARY DIAPHRAGM KIT
  • Secondary Diaphragm Kit; rod length is 1.97"
Out of Stock
C$47.99Was C$52.31 Save 8%
View
Billet Aluminum Throttle Cable Bracket
  • Billet Aluminum
  • Throttle Cable Bracket for GM Style Cable
  • Edelbrock Performer and Carter AFB model carburetors
Out of Stock
C$194.99Was C$212.54 Save 8%
View
Classic Double Pumper Carburetor for 578 vehicles
  • Optimized street/strip calibration that works out-of-the-box
  • Electric choke for precise cold start control
  • Mechanical secondaries for awesome tire turning performance
Out of Stock
C$1,579.99Was C$1,722.19 Save 8%
View
DIRECT MOUNT FUEL PULSE DAMPER
  • Fittings included for damper/regulator’s and direct mount dampers
  • Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
  • Assembled and tested in the USA
Out of Stock
C$199.99Was C$217.99 Save 8%
View
Fox Body Fuel System Kits for 1986-1993 Ford Mustang
  • Prepares your 1986-1993 Ford Fox Body Mustangs with a bullet proof fuel system for any engine application
  • Simplifies your fuel system with direct replacement components while still maintaining an OEM-like appearance
  • Highly detailed installation instructions to guide you, step by step, along the installation process
Out of Stock
C$2,400.99Was C$2,617.08 Save 8%
View
Marine Carb Renew Kit
  • Contains all parts and gaskets necessary to restore your marine carburetor to like new performance
  • Detailed instructions included
Out of Stock
C$99.99Was C$108.99 Save 8%
View
30 Amp Fuel Pump Relay Kit
  • Can be used with any electric fuel pump, as long as the current load is not above 30 amps
  • Quality insulated crimp connectors are provided to make the necessary splices, where required
  • Detailed instructions included
Out of Stock
C$300.99Was C$328.08 Save 8%
View
Aluminum Choke Conversion Kit
  • Electric Choke Conversion Kit Shiny Finish w/External Vacuum Source (0-4412, 0-4776, 0-4777, 0-4778, 0-4779, 0-4780…
  • Hardware included
Out of Stock
C$203.99Was C$222.35 Save 8%
View
Choke Conversion Kit
  • Genuine Holley Quality Parts
Out of Stock
C$209.99Was C$228.89 Save 8%
View
Chrome Fuel Filter
  • In-Line fuel filter for carbureted applications
  • Chrome finish
  • designed for 5/16" hose
Out of Stock
C$47.99Was C$52.31 Save 8%
View
Equipped Billet Fill Cap
  • Steel weld bung
  • 0.675" Overall Height of Weld Bung
  • Thread 1-1/2"-12
Out of Stock
C$76.99Was C$83.92 Save 8%
View
Side Hung Float
  • Genuine Holley Quality Parts
Out of Stock
C$36.99Was C$40.32 Save 8%
View
Base Gasket
  • 1 1/2" Primary
  • 2" Secondary
  • 1/4" Thick
Out of Stock
C$66.99Was C$73.02 Save 8%
View
Flexible In Tank Fuel Line
  • 8MM ID
  • 284MM Long
  • Compatible for all fuel types
Out of Stock
C$11.99Was C$13.07 Save 8%
View
Fuel Injection O-Ring Kit
  • Kit contains 4 small and 4 large O-Rings
Out of Stock
C$52.99Was C$57.76 Save 8%
View
Fuel Line
  • Genuine Holley Quality Parts
Out of Stock
C$122.99Was C$134.06 Save 8%
View
In-Tank RetroFit Fuel Module 525 LPH Return Style
  • Retrofit Fuel Module 525 LPH- Return Style
  • ¼” NPT ports for a wide variety of plumbing options
  • Optional roll over valve available
Out of Stock
C$1,706.99Was C$1,860.62 Save 8%
View
THROTTLE BODY KIT
  • Replacment component for 3310-1; 3310-2; 3310-3; 3310-4
Out of Stock
C$488.99Was C$533.00 Save 8%
View
FUEL CELL VENT KIT
  • Complete kit with 6 ft of 10AN Nylon Braided hose, all fittings, rollover valve, bulkhead and breather filter
Out of Stock
C$274.99Was C$299.74 Save 8%
View
Fuel Line
  • The fuel lines are 9.75” long (standard fuel line is 9.50”)
  • Increased fuel volume of each bowl extends length by .125” per bowl (.250” overall).
Out of Stock
C$416.99Was C$454.52 Save 8%
View
IN-LINE FUEL PULSE DAMPER
  • Fittings included for damper/regulator’s and direct mount dampers
  • Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
  • Assembled and tested in the USA
Out of Stock
C$288.99Was C$315.00 Save 8%
View
Float
  • Genuine Holley Quality Parts
Out of Stock
C$34.99Was C$38.14 Save 8%
View
SPE-2955 Spectre Dual Feed Fuel Line Kit
  • Triple chrome plated hose fitting
  • Includes hoses and clamps
  • Engineered for optimum fit and function
Out of Stock
C$194.99Was C$212.54 Save 8%
View
Billet Regulator Bracket
  • Black anodized billet construction
  • Simplifies mounting Holley fuel pressure regulators
  • Included hardware for easy installation
Out of Stock
C$133.99Was C$146.05 Save 8%
View
Billet Regulator Bracket
  • Black anodized billet construction
  • Simplifies mounting Holley fuel pressure regulators
  • Included hardware for easy installation
Out of Stock
C$122.99Was C$134.06 Save 8%
View
CARBURETOR LINKAGE KIT FOR 3X2 SBC
  • Specifically designed for 3X2 Carburetor set-up
  • Kit includes 2 linkage arms, 2 nuts, 2 washers, and 2 cotter pins
Out of Stock
C$467.99Was C$510.11 Save 8%
View
Fuel Cell Rollover Valve
  • 10AN ORB port to 10AN male
  • Low-profile design
  • Pump gas and E85 compatible
Out of Stock
C$69.99Was C$76.29 Save 8%
View
Fuel Filter Element and O-ring Kit
  • Replacement filter element for 100 GPH Holley billet fuel filter
  • Includes 40 micron stainless steel woven mesh filter element and O-rings
Out of Stock
C$29.99Was C$32.69 Save 8%
View
Replacement Main Body
  • Main bodies are factory assembled and kit includes new gaskets to complete the installation
  • Simple installation with common hand tools that you already have in your shop
  • Main bodies are available for our most popular carburetor models
Out of Stock
C$407.99Was C$444.71 Save 8%
View
Replacement Pre-Filter Kit
  • Direct replacement for 50-1000, 50-1200, 50-1215, 50-1220 fuel pump filter
  • Ensures pump does not become contaminated with debris from fuel tank
  • Designed to clamp directly into pump inlet
Out of Stock
C$18.99Was C$20.70 Save 8%
View
SPE-6932 Premium Clear Fuel Filter
  • Clear housing for easy viewing
  • For non-fuel injected applications
  • Filters down to 40 microns
Out of Stock
C$20.99Was C$22.88 Save 8%
View
3" X 8" HydraMat®, Rectangle Center Outlet
  • The outlet has 6 positions to orient the HydraMat for best location in the fuel cell
  • Eliminates the need for specialty reservoirs, sumps and pick up pumps saving cost and greatly reducing complexity
  • Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump
Out of Stock
C$366.99Was C$400.02 Save 8%
View
Carburetor Throttle Shaft Conversion Kits
  • Kit Contains Primary & Secondary Throttle Shaft Assy. and eight Throttle Plate Mounting Screws.
Out of Stock
C$186.99Was C$203.82 Save 8%
View
Diecast In-Tank RetroFit Fuel Module Returnless System
  • The easiest way to convert your vehicle to an in-tank, EFI fuel system
  • ¼” NPT ports for a wide variety of plumbing options
  • Optional roll over valve available
Out of Stock
C$1,360.99Was C$1,483.48 Save 8%
View
Fuel Cell EFI Pump Module Assembly
  • Update your fuel cell to EFI the easy way!
  • Designed to drop right into your existing 12 bolt flange fuel cell
  • Module with Dual 450 LPH fuel pumps configurations
Out of Stock
C$1,360.99Was C$1,483.48 Save 8%
View
Fuel Line
  • Genuine Holley Quality Parts
Out of Stock
C$330.99Was C$360.78 Save 8%
View
Fuel Pump Rotor And Vane Kit
  • Rotor and vane kit for 12-801-1, 12-802-1, 12-812-1 and 12-815-1 fuel pumps
  • Includes lower gasket, rotor and (4) vanes
Out of Stock
C$67.99Was C$74.11 Save 8%
View
Gen 3 Dominator Air Scoop Adapter – Black
  • CNC machined from billet aluminum
  • Available in clear or black anodize for corrosion protection and good looks
  • Includes adapter and carburetor to adapter mounting hardware
Out of Stock
C$408.99Was C$445.80 Save 8%
View
Accelerator Pump Cover
  • Genuine Holley Quality Parts
Out of Stock
C$65.99Was C$71.93 Save 8%
View
Diecast In-Tank RetroFit Fuel Module Returnless System
  • The easiest way to convert your vehicle to an in-tank, EFI fuel system
  • ¼” NPT ports for a wide variety of plumbing options
  • Optional roll over valve available
Out of Stock
C$1,520.99Was C$1,657.88 Save 8%
View
Flexible In Tank Fuel Line
  • 10MM ID
  • 80MM Long
  • Compatible for all fuel types
Out of Stock
C$8.99Was C$9.80 Save 8%
View
Fuel Line Kit - 3X2 Carb set-up
  • Specifically designed for 3X2 Carburetor Set-ups
Out of Stock
C$369.99Was C$403.29 Save 8%
View
Fuel Rail Kit
  • Genuine Holley Quality Parts
  • 6AN Fuel Rails
Out of Stock
C$257.99Was C$281.21 Save 8%
View
HYDRAMAT (3X8) 19MM Center
  • Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions
  • Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump
  • Can be folded and compressed for easy installation through a variety of fuel cell openings
Out of Stock
C$375.99Was C$409.83 Save 8%
View
IN-LINE FUEL PULSE DAMPER
  • Fittings included for damper/regulator’s and direct mount dampers
  • Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
  • Assembled and tested in the USA
Out of Stock
C$288.99Was C$315.00 Save 8%
View
Intake Manifold Spacer
  • Cast Aluminum
  • Dominator To Square Bore
  • 2 1/4" Height
Out of Stock
C$343.99Was C$374.95 Save 8%
View
Marine Carb Renew Kit
  • Contains all parts and gaskets necessary to restore your marine carburetor to like new performance
  • Detailed instructions included
Out of Stock
C$152.99Was C$166.76 Save 8%
View
Marine Carb Renew Kits
  • Contains all parts and gaskets necessary to restore your marine carburetor to like new performance
  • Detailed instructions included
Out of Stock
C$111.99Was C$122.07 Save 8%
View
Pro-Flo 4 EFI Upgrade Kit (from Legacy Pro-Flo to Pro-Flo 4)
  • Economical EFI System solution for users with existing legacy Edelbrock Pro Flo 1,2 or 3 EFI systems and components.
  • Simplified installation, providing all existing features of Pro Flo 4 EFI
Out of Stock
C$1,943.99Was C$2,118.95 Save 8%
View
Replacement Main Body
  • Main bodies are factory assembled and kit includes new gaskets to complete the installation
  • Simple installation with common hand tools that you already have in your shop
  • Main bodies are available for our most popular carburetor models
Out of Stock
C$385.99Was C$420.73 Save 8%
View
2.5" x 8" HydraMat®, Rectangle
  • Works with Alcohol, Ethanol, Methanol, and E-85 fuels
  • Works with 2-cycle oil blends as high as 20:1
  • Not for use with diesel fuels
Out of Stock
C$374.99Was C$408.74 Save 8%
View
30" x 14" HydraMat®, Rectangle
  • Works with Alcohol, Ethanol, Methanol, and E-85 fuels
  • Works with 2-cycle oil blends as high as 20:1
  • Not for use with diesel fuels
Out of Stock
C$1,792.99Was C$1,954.36 Save 8%
View
Carburetor Adapter Plate
  • Cast aluminum
  • Can also be used in reverse
  • Will allow any 4150 or 4160 carburetor to be mounted on manifolds designed originally for Rochester Quadra-Jet or Carter…
Out of Stock
C$189.99Was C$207.09 Save 8%
View
Carburetor Throttle Cable Bracket
  • Kit Contains Bracket and Longer Carburetor Mounting Stud.
Out of Stock
C$106.99Was C$116.62 Save 8%
View
Classic Carburetor for 578 vehicles
  • Calibrated and intended for small V-8 engines
  • Single feed fuel inlet for easy installation
  • Power valve blow-out protection
Out of Stock
C$1,360.99Was C$1,483.48 Save 8%
View
DIRECT MOUNT FUEL PULSE DAMPER
  • Fittings included for damper/regulator’s and direct mount dampers
  • Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
  • Assembled and tested in the USA
Out of Stock
C$220.99Was C$240.88 Save 8%
View
Flexible In Tank Fuel Line
  • 8MM ID
  • 160MM Long
  • Compatible for all fuel types
Out of Stock
C$10.99Was C$11.98 Save 8%
View
Fuel Cell EFI Pump Module Assembly
  • Update your fuel cell to EFI the easy way!
  • Designed to drop right into your existing 12 bolt flange fuel cell
  • Module with Dual 255 LPH fuel pumps configurations
Out of Stock
C$1,440.99Was C$1,570.68 Save 8%
View
Fuel Filter Element and O-ring Kit
  • Replacement filter element for 175 GPH Holley billet fuel filter
  • Includes 100 micron stainless steel woven mesh filter element and O-rings
Out of Stock
C$42.99Was C$46.86 Save 8%
View
Fuel Line
  • Rugged Billet Construction
  • AN fittings
  • Red and Blue Anodized
Out of Stock
C$360.99Was C$393.48 Save 8%
View
Out of Stock
C$499.99Was C$544.99 Save 8%
View
Replacement Main Body
  • Main bodies are factory assembled and kit includes new gaskets to complete the installation
  • Simple installation with common hand tools that you already have in your shop
  • Main bodies are available for our most popular carburetor models
Out of Stock
C$289.99Was C$316.09 Save 8%
View
Out of Stock
C$991.99Was C$1,081.27 Save 8%
View
11" x 11" HydraMat®, Cross
  • Works with Alcohol, Ethanol, Methanol, and E-85 fuels
  • Works with 2-cycle oil blends as high as 20:1
  • Not for use with diesel fuels
Out of Stock
C$681.99Was C$743.37 Save 8%
View
4 Port VR Series Fuel Pressure Regulator
  • EFI regulators are adjustable from 40-100 PSI base pressure
  • Compatible with gasoline, methanol, and E85* (Compatible with
  • 1/8” NPT gauge port
Out of Stock
C$681.99Was C$743.37 Save 8%
View
650 CFM Ultra Double Pumper Carburetor
  • Factory preset electric choke for easy startups
  • Mechanical secondaries for awesome tire turning performance
  • Aluminum construction for a 43% weight savings
Out of Stock
C$1,242.99Was C$1,354.86 Save 8%
View
850 CFM Competition Double Pumper Carburetor-Aluminum
  • No choke for maximum airflow
  • Mechanical secondaries for awesome tire turning performance
  • Dual feed fuel inlets for constant high volume fuel delivery
Out of Stock
C$1,205.99Was C$1,314.53 Save 8%
View
8" x 8" HydraMat, Cross
  • Works with Alcohol, Ethanol, Methanol, and E-85 fuels
  • Works with 2-cycle oil blends as high as 20:1
  • Not for use with diesel fuels
Out of Stock
C$526.99Was C$574.42 Save 8%
View
Analog Style Fuel Pressure Gauge
  • LED dimmable backlit design with red pointers makes them easy to read day or night
  • All gauges are electric style and include sending units depending on gauge type
  • Spin lock ring threads to back of gauge case for simple and secure gauge mounting
Out of Stock
C$597.99Was C$651.81 Save 8%
View
Billet Regulator Bracket
  • Clear anodized billet construction
  • Simplifies mounting Holley fuel pressure regulators
  • Included hardware for easy installation
Out of Stock
C$130.99Was C$142.78 Save 8%
View
Cable Bracket
  • Light-Weight Billet Aluminum
  • Black Anodized For Long Lasting Good Looks
  • For Lokar Style cable
Out of Stock
C$89.99Was C$98.09 Save 8%
View
Equipped Billet Fuel Cell Cap
  • Features 5.343'' 12-bolt flange
  • Large 3'' opening
  • Stainless steel hardware included
Out of Stock
C$307.99Was C$335.71 Save 8%
View
Flexible In Tank Fuel Line
  • 8MM ID
  • 120MM Long
  • Compatible for all fuel types
Out of Stock
C$7.99Was C$8.71 Save 8%
View
Fuel Bowl Plug Gasket
  • Fits All Holley Quick Change Fuel Bowls
  • 10 Pack
Out of Stock
C$18.99Was C$20.70 Save 8%
View
Fuel Cell EFI Pump Module Assembly
  • Update your fuel cell to EFI the easy way!
  • Designed to drop right into your existing 6 bolt flange fuel cell
  • Module with Dual 255 LPH fuel pumps configurations
Out of Stock
C$1,280.99Was C$1,396.28 Save 8%
View
Gerotor Replacement Kit
  • Gerotor kit for 12125 and 12-150 fuel pumps
  • Includes lower gasket, wear plate, wear plate O-ring and geroter set
Out of Stock
C$262.99Was C$286.66 Save 8%
View
HYDRAMAT (3X8) 19MM Offset
  • Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions
  • Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump
  • Can be folded and compressed for easy installation through a variety of fuel cell openings
Out of Stock
C$239.99Was C$261.59 Save 8%
View
Marine Fuel Line
  • Genuine Holley Quality Parts
Out of Stock
C$198.99Was C$216.90 Save 8%
View
Marine Renew Kit
  • Contains all parts and gaskets necessary to restore your marine carburetor to like new performance
  • Detailed instructions included
Out of Stock
C$118.99Was C$129.70 Save 8%
View
Regulator Rebuild Kit
  • Fuel Pressure regulator rebuild kit for Holley 12-846, and 12846ERL regulators
  • Includes diaphragm and spring
Out of Stock
C$99.99Was C$108.99 Save 8%
View
Regulator Rebuild Kit
  • Fuel Pressure regulator rebuild kit for Holley 12-848 & 12848ERL regulators
  • Includes diaphragm and spring
Out of Stock
C$103.99Was C$113.35 Save 8%
View
Regulator Rebuild Kit
  • Fuel Pressure regulator rebuild kit for Holley 12-879 and 12-880 regulator
  • Includes diaphragm and spring
Out of Stock
C$106.99Was C$116.62 Save 8%
View
Renew Kit Carburetor Rebuild Kit
  • Step-By-Step Instructions
  • Detailed Tuning Guide
  • Competitively Priced
Out of Stock
C$119.99Was C$130.79 Save 8%
View
Replacement Fuel Bowl Kit
  • Side-hung-float style with provision for transfer tube and accelerator pump
  • Used on model 4160 carburetors
  • accepts the adjustable-style needle and seat assembly
Out of Stock
C$104.99Was C$114.44 Save 8%
View
Replacement Main Body
  • Main bodies are factory assembled and kit includes new gaskets to complete the installation
  • Simple installation with common hand tools that you already have in your shop
  • Main bodies are available for our most popular carburetor models
Out of Stock
C$426.99Was C$465.42 Save 8%
View
SPE-2435 Throttle Cable & Bracket Kit
  • Includes universal throttle bracket
  • Fully adjustable throttle bracket
  • 3 foot long throttle cable
Out of Stock
C$122.99Was C$134.06 Save 8%
View