Trade prices for dealers.

0

Belts, Pulleys & Mounts: 6,736 Results

In stock
14-17 Kenworth T680 Paccar MX-13 Diesel Fan Belt Drive Tensioner
  • Double row bearings carry more load and last up to 3X longer than two individual bearings
  • Chrome-silicone round torsion spring for less flex-fatigue than flat-spring designs
  • Optimized components engineered for maximum strength and durability
Out of Stock
C$229.00Was C$249.61 Save 8%
View
14-17 Peterbilt 320 Cummins ISX12 Diesel Serpentine Belt Kit
  • FleetRunner belts are engineered to handle high mileage, high idle times and high temperatures in abusive environments
  • Complete system service extends preventive maintenance schedules
  • Engineered to save your fleet money and reduce downtime
Out of Stock
C$689.00Was C$751.01 Save 8%
View
14-23 Dodge Pickup V-8 6.4L Alt. Right Side Stretch Fit V-Ribbed Belt for 2014-2026 Ram 2500 and 3500
  • Gates engineered tensile cord has the needed combination of strength and flexibility using advanced polyamide tensile…
  • Patented highly engineered EPDM belt ribs are extremely resistant to contamination, wear and pilling
  • NOTE: Stretch Fit belts are single-use only and must be replaced if removed
Out of Stock
C$94.99Was C$103.54 Save 8%
View
14 3.6L Micro V Serpentine Belt for 9 vehicles
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • EPDM rubber constructions resist cracking on the rib surface
  • Tensioner Replacement is Recommended (if equipped)
Out of Stock
C$62.99Was C$68.66 Save 8%
View
149cc G Force CVT Belt for KYMCO, Arctic Cat and Textron
  • High tensile aramid cord maximizes acceleration, shock load resistance, and extreme fatigue resistance; great for…
  • Improved durability, crack & wear-resistance provides up to 2x the life of the original G-Force Belt
  • Not for use in turbocharged or heavily modified engine applications
Out of Stock
C$105.99Was C$115.53 Save 8%
View
15-16 Mack MRU Series Mack MP7 Diesel Serpentine Belt Kit
  • FleetRunner belts are engineered to handle high mileage, high idle times and high temperatures in abusive environments
  • Complete system service extends preventive maintenance schedules
  • Engineered to save your fleet money and reduce downtime
Out of Stock
C$989.00Was C$1,078.01 Save 8%
View
15-17 International/Navistar WorkStar 7600 Diesel Accessory Belt Drive Kit
  • FleetRunner belts are engineered to handle high mileage, high idle times and high temperatures in abusive environments
  • Complete system service extends preventive maintenance schedules
  • Engineered to save your fleet money and reduce downtime
Out of Stock
C$999.00Was C$1,088.91 Save 8%
View
15-19 Intimidator Crew Cab Series 750cc Drive G-Force CVT Belt
  • High tensile aramid cord maximizes acceleration, shock load resistance, and extreme fatigue resistance; great for…
  • Improved durability, crack & wear-resistance provides up to 2x the life of the original G-Force Belt
  • Not for use in turbocharged or heavily modified engine applications
Out of Stock
C$249.00Was C$271.41 Save 8%
View
1.5L Micro-V Serpentine Belt for Honda and Acura
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • EPDM rubber constructions resist cracking on the rib surface
  • Tensioner Replacement is Recommended (if equipped)
Out of Stock
C$67.99Was C$74.11 Save 8%
View
1.5L Timing Belt for 1992-1998 Toyota Paseo and Tercel
  • Specially-formulated HNBR rubber compound provides up to 3X the heat resistance
  • Gripping teeth reinforced with aramid and nylon cover to minimize wear
  • As much as 300 percent stronger than the standard aftermarket belt
Out of Stock
C$399.00Was C$434.91 Save 8%
View
16-17 Intimidator Classic Series 799cc Drive G-Force RedLine CVT Belt
  • Optimized, patented Ethylene Elastomeric (EE) compound maximizes axial stiffness enabling belts to run at higher…
  • Tested under extreme conditions in controlled environments as well as on race vehicles
  • Greater heat resistance and recovery, even under severe duty cycles
Out of Stock
C$509.00Was C$554.81 Save 8%
View
1.6/1.8L Timing Belt Cam Tensioner Assembly for 8 vehicles
  • Engineered w/ high strength, low weight & quiet operation for efficient system operation
  • Metal components resist contamination w/ composite sealant
  • Premium bearings meet or exceed OE standards
Out of Stock
C$269.00Was C$293.21 Save 8%
View
16-22 Ford F750 Super Duty V-8 6.7L Diesel Air Brake Compr. Stretch Fit V-Ribbed Belt
  • Gates engineered tensile cord has the needed combination of strength and flexibility using advanced polyamide tensile…
  • Patented highly engineered EPDM belt ribs are extremely resistant to contamination, wear and pilling
  • NOTE: Stretch Fit belts are single-use only and must be replaced if removed
Out of Stock
C$49.99Was C$54.49 Save 8%
View
1.6L 4cyl Racing Performance Timing Belt for Toyota and Chevrolet
  • Specially-formulated HNBR rubber compound provides up to 3X the heat resistance
  • Gripping teeth reinforced with aramid and nylon cover to minimize wear
  • As much as 300 percent stronger than the standard aftermarket belt
Out of Stock
C$969.00Was C$1,056.21 Save 8%
View
1.6L Micro-V Belt for 10 vehicles
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • EPDM rubber constructions resist cracking on the rib surface
  • Tensioner Replacement is Recommended (if equipped)
Out of Stock
C$55.99Was C$61.03 Save 8%
View
1.6L Performance Timing Belt for Toyota and Geo
  • High-grade HNBR rubber for superior heat and contamination resistance
  • PTFE-infused jackets to reduce frictional losses and tooth shear
  • Premium tensile members providing maximum strength
Out of Stock
C$37.99Was C$41.41 Save 8%
View
1.6L Racing Performance Timing Belt for 1988-1991 Honda CRX and Civic
  • Specially-formulated HNBR rubber compound provides up to 3X the heat resistance
  • Gripping teeth reinforced with aramid and nylon cover to minimize wear
  • As much as 300 percent stronger than the standard aftermarket belt
Out of Stock
C$1,149.00Was C$1,252.41 Save 8%
View
1.6L Racing Performance Timing Belt for Toyota and Geo
  • Specially-formulated HNBR rubber compound provides up to 3X the heat resistance
  • Gripping teeth reinforced with aramid and nylon cover to minimize wear
  • As much as 300 percent stronger than the standard aftermarket belt
Out of Stock
C$729.00Was C$794.61 Save 8%
View
1.6L Timing Belt for 1986-1989 Acura Integra
  • High-grade HNBR rubber for superior heat and contamination resistance
  • PTFE-infused jackets to reduce frictional losses and tooth shear
  • Premium tensile members providing maximum strength
Out of Stock
C$75.99Was C$82.83 Save 8%
View