Trade prices for dealers.

0

Yukon Gear & Axle parts

In stock
Bearing Race Driver for 197 vehicles
  • For accurate installation of bearing races
  • All-Steel Construction
  • Fits M88010 race
Out of Stock
C$269.00Was C$293.21 Save 8%
View
Dana 44 Standard Open Spider Gear Kit Replacement for 62 vehicles
  • Incl. Two Side Gears; Two Pinion Gears; Cross Pin Shaft; Cross Pin Bolt And Spider Gear Thrust Washers
  • Fit Dana Spicer 44 open differential with 30 spline axles
  • Fit Dana Spicer 44 Open Differential w/30 Spline Axles
Out of Stock
C$359.00Was C$391.31 Save 8%
View
Master Overhaul Kit For Dana 70-U Diff for 24 vehicles
  • Incl. Carrier Bearings/Races; Pinion Bearings/Races; Pinion Seal; Complete Shim Kit
  • Incl. Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
  • Fits Dana Spicer 70U
Out of Stock
C$809.00Was C$881.81 Save 8%
View
Kinetic Recover Rope 3/4in
  • 3/4 in. Diameter Kinetic Recovery Rope
  • 3/4" diameter kinetic recovery rope
  • Rope measures 20 feet long
Out of Stock
C$289.00Was C$315.01 Save 8%
View
Kinetic Recover Rope 7/8in
  • 7/8 in. Diameter Kinetic Recovery Rope
  • 7/8" diameter kinetic recovery rope
  • Rope measures 30 feet long
Out of Stock
C$439.00Was C$478.51 Save 8%
View
Recovery Gear Bag
  • Measures (L x W x T) 19” x 12” x 12”
  • Made Of Thick/Tough/Tight-Weave Nylon
  • Easily folds flat when not in use
Out of Stock
C$102.99Was C$112.26 Save 8%
View
Set Up Bearing for 18 vehicles
  • Easily slips on and off pinion journal to allow for pinion depth adjustment
  • For AMC Model 35 Rear And Model 35 Reverse IFS Front Differentials
  • Fits HM88648 pinion bearing
Out of Stock
C$269.00Was C$293.21 Save 8%
View
7.5 GM Cover Gasket for 30 vehicles
  • Fits GM 7.5 in. And 7.625 in.
  • Fits GM 7.5" and 7.625"
  • Cover gasket
Out of Stock
C$35.99Was C$39.23 Save 8%
View
Recovery Gear Kit w/7/8in Kinetic Rope
  • Includes 2 metal shackles, 1 soft shackle
  • Includes 2 Metal Shackles/1 Soft Shackle
  • Rope measures 30 feet long
Out of Stock
C$689.00Was C$751.01 Save 8%
View
10.25in 10.50in Long Spline 1410 Yoke (U-Bolt Style) for Ford
  • Compatible w/ Other Yukon Gear Products; Can Seamlessly Integrate Into Your Existing Setup
  • Ensures A Perfect Fit For Your Specific Application Guaranteeing Optimum Performance
  • Durable Construction Minimizes Driveline Vibrations And Ensures Smooth Operation
Out of Stock
C$339.00Was C$369.51 Save 8%
View
9in Spanner Tool for Ford, Mercury and Lincoln
  • For precise setting of backlash and carrier bearing preload
  • Fits Ford 9" differentials with 3.062" and 3.250" cases
  • This top-quality differential tool is built to last
Out of Stock
C$249.00Was C$271.41 Save 8%
View
Master Overhaul Kit Dana 60 Front Differential for 2017-2023 Ford F-250 Super Duty and F-350 Super Duty
  • OEM Compatibility: The YK D60SR is specially engineered to fit 2017, 2018, 2019, 2020, 2021, 2022, and 2023 models of…
  • Easy Installation: The YK D60SR comes with all the necessary components and detailed instructions for easy installation.…
  • Master Rebuild Kit
Out of Stock
C$879.00Was C$958.11 Save 8%
View
Set Up Bearing for 19 vehicles
  • For GM 7.5 in. And 7.6 in. Differentials
  • For GM 7.5” and 7.6” Differentials
  • Fits HM89249 pinion bearing
Out of Stock
C$209.00Was C$227.81 Save 8%
View
1330 Lifetime U-Joint for 113 vehicles
  • Yukon Products Are Held To The Highest Quality Standards In The Industry
  • Units are inspected to ensure precise accuracy and fitment
  • Engineered using state-of-the-art design software
Out of Stock
C$96.99Was C$105.72 Save 8%
View
1310 Lifetime U-Joint for 171 vehicles
  • Yukon Products Are Held To The Highest Quality Standards In The Industry
  • Units are inspected to ensure precise accuracy and fitment
  • Engineered using state-of-the-art design software
Out of Stock
C$90.99Was C$99.18 Save 8%
View
Axle Bearing Retainer Plate w/Studs for 2004-2007 Nissan TITAN
  • Enhanced Safety: The YSPRET-018 provides a secure and reliable grip, ensuring optimal stability and minimizing the risk…
  • Cost-effective Solution: With the YSPRET-018, you can save big on repair costs without compromising on quality or…
  • Axle Bearing Retainer
Out of Stock
C$96.99Was C$105.72 Save 8%
View
Replacement Unit Bearing Hub Front w/Composite Rotor for 1997-1999 Jeep Wrangler
  • Smooth and Reliable Operation: Experience smooth and reliable wheel rotation, thanks to the advanced engineering of the…
  • High-Quality Replacement: Get the ultimate solution for your '90-'99 Jeep front with the Yukon YB U513084 Replacement…
  • Individual Bearing
Out of Stock
C$249.00Was C$271.41 Save 8%
View
Spin Free Locking Hub Conversion Kit DRW for Dodge and Ram
  • Incl. Premium Locking Hubs; High Quality Bearings; High Quality Seals And All Hardware For Installation
  • Incl. New Wheel Hubs; Spindles; High Strength Yukon 4340 Chrome-Moly Outer Axles
  • Fits 2010-2011 Dodge 2500/3500
Out of Stock
C$5,059.00Was C$5,514.31 Save 8%
View
1330 Dual-Size Cap U-Joint for 120 vehicles
  • Yukon Products Are Held To The Highest Quality Standards In The Industry
  • Units are inspected to ensure precise accuracy and fitment
  • Engineered using state-of-the-art design software
Out of Stock
C$102.99Was C$112.26 Save 8%
View
1330 U-Joint w/Zerk Fitting for 93 vehicles
  • Yukon Products Are Held To The Highest Quality Standards In The Industry
  • Units are inspected to ensure precise accuracy and fitment
  • Engineered using state-of-the-art design software
Out of Stock
C$96.99Was C$105.72 Save 8%
View
9in Spanner Tool for Ford, Mercury and Lincoln
  • This top-quality differential tool is built to last
  • Fits Ford 9 in. Differential w/2.891 in. Case
  • Fits Ford 9" differential with 2.891" case
Out of Stock
C$249.00Was C$271.41 Save 8%
View
Bearing install Kit 7.5in Diff for 19 vehicles
  • Incl. Are Carrier Bearings And Races; Pinion Bearings And Races; Pinion Seal; Crush Sleeve; Marking Compound And Brush
  • Fits Ford 7.5 in.
  • Fits Ford 7.5"
Out of Stock
C$379.00Was C$413.11 Save 8%
View
Bearing install Kit 8.25in Diff for 35 vehicles
  • Incl. Are Carrier Bearings And Races; Pinion Bearings And Races; Pinion Seal; Crush Sleeve; Marking Compound And Brush
  • Fits 1976 And Up Chrysler 8.25 in.
  • Fits 1976 and up Chrysler 8.25"
Out of Stock
C$409.00Was C$445.81 Save 8%
View
Bearing Puller Tool for 45 vehicles
  • Clamshell design works on most pressed-on axle bearings
  • For Ford 9 in. And Dana 44 Differentials
  • For Ford 9” and Dana 44 differentials
Out of Stock
C$589.00Was C$642.01 Save 8%
View
Bearing Race Driver for 112 vehicles
  • For accurate installation of bearing races
  • All-Steel Construction
  • Fits HM88510 race
Out of Stock
C$269.00Was C$293.21 Save 8%
View
Bearing Race Driver for 59 vehicles
  • For accurate installation of bearing races
  • All-Steel Construction
  • Fits HM89410 race
Out of Stock
C$269.00Was C$293.21 Save 8%
View
Bearing Race Driver for 93 vehicles
  • For accurate installation of bearing races
  • All-Steel Construction
  • Fits M86610 race
Out of Stock
C$269.00Was C$293.21 Save 8%
View
Bearing Race Driver for Toyota
  • For accurate installation of bearing races
  • For Toyota 7.5", 8" rear differentials
  • Fits 32307 race
Out of Stock
C$209.00Was C$227.81 Save 8%
View
Bearing Race Driver Set / 21 Piece for 348 vehicles
  • This top-quality differential tool kit is built to last
  • 21-Piece Kit Cover Most Popular Differentials
  • All steel construction
Out of Stock
C$2,449.00Was C$2,669.41 Save 8%
View
Cross Pin Bolt Extractor Kit for 203 vehicles
  • Easily Removes A Broken Cross Pin Bolt From A Carrier Case
  • This top-quality differential tool is built to last
  • 5-piece kit works on most popular differentials
Out of Stock
C$183.99Was C$200.55 Save 8%
View
Inner Axle Side Seal installation Tool for 65 vehicles
  • Works with Dana 30, 44 and 60 front differentials
  • Helps seal inner front axles to the proper depth
  • Works w/Dana 30; 44 And 60 Front Differentials
Out of Stock
C$309.00Was C$336.81 Save 8%
View
Installer Tool Package for 325 vehicles
  • Aimed for the installer, this highly effective kit is a real time-saver
  • Aimed For The Installer; This Highly Effective Kit Is A Real Time-Saver
  • This top-quality differential tool kit is built to last
Out of Stock
C$3,089.00Was C$3,367.01 Save 8%
View
Main Pin for Carrier Bearing Puller
  • This top-quality differential tool is built to last
  • Part of Yukon Carrier Bearing Puller Set
  • Fits Carrier Bearing Puller
Out of Stock
C$92.99Was C$101.36 Save 8%
View
Master Overhaul Kit For Dana 27 Diff for Jeep and International
  • Incl. Carrier Bearings/Races; Pinion Bearings/Races; Pinion Seal; Complete Shim Kit
  • Incl. Are Timken Bearings And Races Along w/High Quality Seals And Small Parts
  • Fits Dana Spicer 27
Out of Stock
C$649.00Was C$707.41 Save 8%
View
Minor install Kit 9.25in Rear Diff for 48 vehicles
  • Incl. Are A Pinion Seal; Crush Sleeve; Complete Shim Kit; Marking Compound And Brush
  • Fits Chrysler 9.25 in. Rear
  • Fits Chrysler 9.25" rear
Out of Stock
C$59.99Was C$65.39 Save 8%
View