Trade prices for dealers.

0

SPC Performance parts

In stock
GM Rear Camber -.25 Shim for Chevrolet, Buick and Cadillac
  • Make rear wheel alignment changes on twist beam axles with stackable fixed change shims
  • Stack up to two shims for maximum change
  • Change +/- .25 degrees
In Manufacturer stock, Ships Nov 24
C$34.99Was C$38.14 Save 8%
View
GM Rear Toe + - .50 Shim for Chevrolet, Buick and Cadillac
  • Make rear wheel alignment changes on twist beam axles with stackable fixed change shims
  • Stack up to two shims for maximum change
  • Change +/- .50 degrees
In Manufacturer stock, Ships Nov 24
C$34.99Was C$38.14 Save 8%
View
MBZ SHIMS 4X6.5X2 deg.(6)
  • Manganese Bronze construction provides top compression strength and hardness
  • Width - 4", Degree - 2.0°, Length - 6.5"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 24
C$899.00Was C$979.91 Save 8%
View
MBZ SHIMS 4X6.5X4 deg.(6)
  • Manganese Bronze construction provides top compression strength and hardness
  • Width - 4", Degree - 4.0°, Length - 6.5"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 24
C$1,089.00Was C$1,187.01 Save 8%
View
PITMAN ARM SEPARATOR
  • Zinc plated for long service life
  • 12" overall length
  • 1" opening
In Manufacturer stock, Ships Nov 24
C$57.99Was C$63.21 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$1,229.00Was C$1,339.61 Save 8%
View
Rear Shim Set (18 pc) for 2016-2022 Honda HR-V
  • Pefect for dialing in Toe and Caster at one time
  • Use up to 2 shims for desired change
  • Camber and Toe Kit for Honda HR-V
In Manufacturer stock, Ships Nov 24
C$849.00Was C$925.41 Save 8%
View
Rear Toe Shim Set (8) for 2012-2017 Hyundai Accent and Kia Rio
  • Correct toe and thrust angle issues to improve drivability, tire life
  • Solve adjustability on Kia/Hyundai rear twist beam axle
  • OE does not provide any method to adjust toe.
In Manufacturer stock, Ships Nov 24
C$194.99Was C$212.54 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$39.99Was C$43.59 Save 8%
View
U ADPTRS FOR 40910 (3)
  • Includes (x3) Bushing U-adaptors
  • Fits SPC #40910
In Manufacturer stock, Ships Nov 24
C$41.99Was C$45.77 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: LH 1"-14 X 9/16" BH X 2.625" W
In Manufacturer stock, Ships Nov 24
C$259.00Was C$282.31 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: LH 3/4" - 16 X 12mm BH X 50mm W
In Manufacturer stock, Ships Nov 24
C$209.00Was C$227.81 Save 8%
View
ZINC SHIMS 3.5x6.25x2.0 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3.5", Degree - 2.0, Length - 6.25"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 24
C$269.00Was C$293.21 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$115.99Was C$126.43 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$239.00Was C$260.51 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$299.00Was C$325.91 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$359.00Was C$391.31 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$103.99Was C$113.35 Save 8%
View
AL SHIMS 3X6 X 0.5 deg.(6)
  • Width - 3", Degree - 0.5, Length - 6"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 24
C$116.99Was C$127.52 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$249.00Was C$271.41 Save 8%
View
CARBIDE INSERTS-PRO-CUT
  • For Pro-Cut Model 610 on-car lathes
  • Pro-Cut Part# 50-741,50-742
  • 10 bits per pack
In Manufacturer stock, Ships Nov 24
C$190.99Was C$208.18 Save 8%
View
CAST SHIM 1/16in. (6) for Jeep
  • Stackable for larger changes
  • Shim thickness: 1/16"
  • Pack of 6
In Manufacturer stock, Ships Nov 24
C$42.99Was C$46.86 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$40.99Was C$44.68 Save 8%
View
EXTENDED LENGTH UPPER for 19 vehicles
  • Mounting hardware included
  • Requires one per wheel
  • Grease-able design
In Manufacturer stock, Ships Nov 24
C$419.00Was C$456.71 Save 8%
View
FRONT HUB & AXLE PULLER
  • Perfect for independent suspension vehicles
  • Can be used in conjunction with SPC #499
  • Includes flange screw and jab nut
In Manufacturer stock, Ships Nov 24
C$128.99Was C$140.60 Save 8%
View
Muscle Car Arm Rebuild Kit
  • Rebuilds ball joint for SPC 97183 control arms
  • All inclusive Rebuild Kit
  • 7.30degree taper
In Manufacturer stock, Ships Nov 24
C$112.99Was C$123.16 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$94.99Was C$103.54 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$399.00Was C$434.91 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$469.00Was C$511.21 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: RH 1"-14 X 9/16" BH X 2.625" W
In Manufacturer stock, Ships Nov 24
C$239.00Was C$260.51 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: LH 1/2"-20 X 3/8" BH X 1.5" W
In Manufacturer stock, Ships Nov 24
C$194.99Was C$212.54 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: RH 1-1/4"-12 X 5/8" BH X 2.5" W
In Manufacturer stock, Ships Nov 24
C$289.00Was C$315.01 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: RH 3/4 - 16 X 12mm BH X 45mm W
In Manufacturer stock, Ships Nov 24
C$209.00Was C$227.81 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: RH M18X1.5 X 12mm BH X 50mm W
In Manufacturer stock, Ships Nov 24
C$209.00Was C$227.81 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: RH M18X1.5 X 12mm BH X 57mm W
In Manufacturer stock, Ships Nov 24
C$209.00Was C$227.81 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$70.99Was C$77.38 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$2,089.00Was C$2,277.01 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$369.00Was C$402.21 Save 8%
View
BREAK AWAY AXLE SHIMS(6) for Jeep
  • Box of (x6) Shims
  • 6 shims per box
  • Width: 1-3/4"
In Manufacturer stock, Ships Nov 24
C$148.99Was C$162.40 Save 8%
View
BREAK AWAY AXLE SHIMS(6) for Jeep
  • Box of (x6) Shims
  • 6 shims per box
  • Width: 1-3/4"
In Manufacturer stock, Ships Nov 24
C$148.99Was C$162.40 Save 8%
View
CARBIDE INSERTS-PRO-CUT
  • For Pro-Cut Model 610 on-car lathes
  • Pro-Cut Part# 50-741,50-742
  • 6 bits per pack
In Manufacturer stock, Ships Nov 24
C$101.99Was C$111.17 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$41.99Was C$45.77 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$51.99Was C$56.67 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$77.99Was C$85.01 Save 8%
View
FORCING SCREW FOR 7250
  • Replacement forcing rod for SPC #72509
In Manufacturer stock, Ships Nov 24
C$145.99Was C$159.13 Save 8%
View
HAMMER FOR 499
  • Fits SPC #499 Flange Axle Puller
  • Replacement Hammer Only
  • Silver coating
In Manufacturer stock, Ships Nov 24
C$87.99Was C$95.91 Save 8%
View
HONDA BALLJOINT ADAPTER
  • Use with Ball Joint press #40920
  • Sturdy steel construction
  • Honda Ball Joint Adapter
In Manufacturer stock, Ships Nov 24
C$46.99Was C$51.22 Save 8%
View
HONDA BALLJOINT ADAPTER
  • Use with Ball Joint press #40920
  • Sturdy steel construction
  • Honda Ball Joint Adapter
In Manufacturer stock, Ships Nov 24
C$46.99Was C$51.22 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$56.99Was C$62.12 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$27.99Was C$30.51 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$101.99Was C$111.17 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$44.99Was C$49.04 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$219.00Was C$238.71 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$59.99Was C$65.39 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$59.99Was C$65.39 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$140.99Was C$153.68 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$99.99Was C$108.99 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$229.00Was C$249.61 Save 8%
View
xAxis Bushing Retrofit Upgrade Kit
  • Maintenance-free design
  • Required: 1 per axle
  • Shop press required
In Manufacturer stock, Ships Nov 24
C$509.00Was C$554.81 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: LH 3/4"-16 X 10MM BH X 2" W
In Manufacturer stock, Ships Nov 24
C$209.00Was C$227.81 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: RH 3/4"-16 X 14MM BH X 2.375"W
In Manufacturer stock, Ships Nov 24
C$209.00Was C$227.81 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: RH 1-1/4 -12 X 5/8" BH X 2.625" W
In Manufacturer stock, Ships Nov 24
C$289.00Was C$315.01 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: LH 1-1/4 -12 X 5/8" BH X 2.625" W
In Manufacturer stock, Ships Nov 24
C$289.00Was C$315.01 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: LH 1-1/4"-14 X 9/16 BH X 2.625" W
In Manufacturer stock, Ships Nov 24
C$269.00Was C$293.21 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Up to 45 degree angularity for easy alignment
In Manufacturer stock, Ships Nov 24
C$239.00Was C$260.51 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: RH 3/4"-16 X 12mm BH X 40mm W
In Manufacturer stock, Ships Nov 24
C$219.00Was C$238.71 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: LH M18x1.5 X 12mm BH X 40mm W
In Manufacturer stock, Ships Nov 24
C$239.00Was C$260.51 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: LH 3/4 - 16 X 12mm BH X 45mm W
In Manufacturer stock, Ships Nov 24
C$209.00Was C$227.81 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: RH 3/4 - 16 X 12mm BH X 47mm W
In Manufacturer stock, Ships Nov 24
C$209.00Was C$227.81 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: RH 3/4" - 16 X 12mm BH X 57mm W
In Manufacturer stock, Ships Nov 24
C$209.00Was C$227.81 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: RH M18X1.5 X 12mm BH X 44.5mm W
In Manufacturer stock, Ships Nov 24
C$209.00Was C$227.81 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: LH M18X1.5 X 12mm BH X 44.5mm W
In Manufacturer stock, Ships Nov 24
C$219.00Was C$238.71 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$98.99Was C$107.90 Save 8%
View
11/13 Dodge Hex Tie Rod Adjuster for 2013-2023 Ram 2500 and 3500
  • Recommended when the existing sleeve has been damaged or adjustments are needed
  • Fully djustable hex shaped sleeves replace the round tie rod sleeve
  • Assures ease of adjustment without slippage
In Manufacturer stock, Ships Nov 24
C$209.00Was C$227.81 Save 8%
View
1/16in. THICK TUBE-40910
  • Fits SPC #40910 Upper Control Arm Bushing Service Set
  • 1/16" (1.5875mm) Thick Adaptor Tube
  • Used to remove Control Arm Bushings
In Manufacturer stock, Ships Nov 24
C$35.99Was C$39.23 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$45.99Was C$50.13 Save 8%
View
3/16in. THICK TUBE-40910
  • Fits SPC #40910 Upper Control Arm Bushing Service Set
  • 3/16" (4.7625mm) Thick Adaptor Tube
  • Used to remove Control Arm Bushings
In Manufacturer stock, Ships Nov 24
C$38.99Was C$42.50 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$579.00Was C$631.11 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$134.99Was C$147.14 Save 8%
View
Ball Joint for 22 vehicles
  • Stock height OE replacement
  • Requires one per wheel
  • Grease-able design
In Manufacturer stock, Ships Nov 24
C$118.99Was C$129.70 Save 8%
View
Balljoint For 72270
  • Replacement joint for 72270 arms
  • Easy bolt on installation
  • Requires one per arm
In Manufacturer stock, Ships Nov 24
C$279.00Was C$304.11 Save 8%
View
BJOINT INSTALL ADPTR SET for Jeep and Dodge
  • Sleeves are designed to match the angle of the yoke on the axle housing to insure proper installation
  • Use with our Dodge & Jeep Offset Ball Joints (part nos. 23510, 23520, 23530, 23540)
  • Use in conjuction with the SPC 72509 Ball Joint Press
In Manufacturer stock, Ships Nov 24
C$183.99Was C$200.55 Save 8%
View
BREAK AWAY AXLE SHIMS(6) for Jeep
  • Box of (x6) Shims
  • 6 shims per box
  • Width: 1-3/4"
In Manufacturer stock, Ships Nov 24
C$194.99Was C$212.54 Save 8%
View
BREAK AWAY AXLE SHIMS(6) for Jeep
  • Box of (x6) Shims
  • 6 shims per box
  • Width: 1-3/4"
In Manufacturer stock, Ships Nov 24
C$209.00Was C$227.81 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$259.00Was C$282.31 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$41.99Was C$45.77 Save 8%
View
LEFT HAND TOOL
  • Complete with one carbide Insert (No. 407)
  • LEFT HAND TOOL HOLDER
  • 3/8" Square Shank
In Manufacturer stock, Ships Nov 24
C$94.99Was C$103.54 Save 8%
View
LONG FORCING SCREW
  • Can be used with SPC #40910 or #40920 kits
  • Removes difficult Toyota Cam Sleeves
  • Threaded rod fits #4434 C-Frame
In Manufacturer stock, Ships Nov 24
C$115.99Was C$126.43 Save 8%
View
Lower Ball Joint for 22 vehicles
  • Mounting hardware included
  • Requires one per wheel
  • Grease-able design
In Manufacturer stock, Ships Nov 24
C$130.99Was C$142.78 Save 8%
View