Trade prices for dealers.

0

SPC Performance parts

In stock
In Manufacturer stock, Ships Nov 24
C$219.00Was C$238.71 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$219.00Was C$238.71 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$259.00Was C$282.31 Save 8%
View
Flex Joint xAxis Jeep JK Front UCA 12mm X 2 X 1.8125
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 24
C$111.99Was C$122.07 Save 8%
View
GM Rear Camber -.50 Shim for Chevrolet, Buick and Cadillac
  • Make rear wheel alignment changes on twist beam axles with stackable fixed change shims
  • Stack up to two shims for maximum change
  • Change +/- .50 degrees
In Manufacturer stock, Ships Nov 24
C$34.99Was C$38.14 Save 8%
View
MBZ SHIMS 4X6.5X0.5 deg.(6)
  • Manganese Bronze construction provides top compression strength and hardness
  • Width - 4", Degree - 0.5°, Length - 6.5"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 24
C$769.00Was C$838.21 Save 8%
View
Rear Performance Kit for Ford and Lincoln
  • Stronger, more robust arm than the OE arm
  • Reduced weight vs the OE arm
  • One kit per axle
In Manufacturer stock, Ships Nov 24
C$1,599.00Was C$1,742.91 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$47.99Was C$52.31 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$81.99Was C$89.37 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$39.99Was C$43.59 Save 8%
View
REPLACEMENT BLADES (2)
  • Two high grade carbon steel replacement blades
  • Provides a straight, even, clean cut
  • 2 per package
In Manufacturer stock, Ships Nov 24
C$39.99Was C$43.59 Save 8%
View
Right Adjustable Control Arm for Audi and Volkswagen
  • Adjusts camber and caster plus or minus 1.5 degrees
  • Kit includes both arms for the RIGHT side only
  • Comes with pinch bolt hardware
In Manufacturer stock, Ships Nov 24
C$739.00Was C$805.51 Save 8%
View
R SQR REC 1 1/4-12
  • 4140 N Chromoly Steel and Grade 8 Bolt
  • Right Hand thread rod end receiver
  • Welds into stock tubing sizes
In Manufacturer stock, Ships Nov 24
C$279.00Was C$304.11 Save 8%
View
R SQR RECVR 1/2-20
  • 4140 N Chromoly Steel and Grade 8 Bolt
  • Right Hand thread rod end receiver
  • Welds into stock tubing sizes
In Manufacturer stock, Ships Nov 24
C$289.00Was C$315.01 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$229.00Was C$249.61 Save 8%
View
Steel Shim 4X6.5X2 - Pack of 6
  • Spring width - 4", Pad Length - 6.5", 2.0 Degree change
  • Top of the line steel construction
  • Maximum compression strength
In Manufacturer stock, Ships Nov 24
C$609.00Was C$663.81 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$44.99Was C$49.04 Save 8%
View
UNIV CAMBER/CASTER TOOL for Dodge, Chrysler and Mitsubishi
  • Perfect for most older Chrysler and Ford SLA vehicle models
  • Zinc plated finish for years of service life
  • Comfortable handle grip for easy adjustment
In Manufacturer stock, Ships Nov 24
C$259.00Was C$282.31 Save 8%
View
Weld-In Ring Kit 2.25 in. ID
  • Designed with optimal press fit for the xAxis
  • Use with SPC xAxis sealed flex joint
  • Includes two snap rings
In Manufacturer stock, Ships Nov 24
C$48.99Was C$53.40 Save 8%
View
Weld-In Ring Kit 2.50 in. ID
  • Designed with optimal press fit for the xAxis
  • Use with SPC xAxis sealed flex joint
  • Includes two snap rings
In Manufacturer stock, Ships Nov 24
C$48.99Was C$53.40 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: RH 3/4" - 16 X 12mm BH X 50mm W
In Manufacturer stock, Ships Nov 24
C$209.00Was C$227.81 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: LH 3/4" - 16 X 12mm BH X 57mm W
In Manufacturer stock, Ships Nov 24
C$209.00Was C$227.81 Save 8%
View
xAxis Sealed Flex Joint
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 24
C$194.99Was C$212.54 Save 8%
View
xAxis Sealed Flex Joint
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 24
C$92.99Was C$101.36 Save 8%
View
xAxis Sealed Flex Joint
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 24
C$94.99Was C$103.54 Save 8%
View
xAxis Sealed Flex Joint for 1999-2004 Ford Mustang Cobra
  • Replaces IRS Mustang Cobra with xAxis(TM) joints from SPC
  • Sealed joint retains grease and repels contaminants
  • Contains 1 per pack (4 needed for vehicle)
In Manufacturer stock, Ships Nov 24
C$144.99Was C$158.04 Save 8%
View
ZINC SHIMS 3.5x6.25x1.5 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3.5", Degree - 1.5, Length - 6.25"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 24
C$239.00Was C$260.51 Save 8%
View
ZINC SHIMS 3 x 6 x 1.5 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3", Degree - 1.5, Length - 6"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 24
C$219.00Was C$238.71 Save 8%
View
1.0 deg. Camber Shim for Ford and Mercury
  • Rear Adjustment Range: Camber ±1.00°
  • Includes Brake Caliper Shim
  • Required: 1 per wheel Only!
In Manufacturer stock, Ships Nov 24
C$37.99Was C$41.41 Save 8%
View
12/13+ Dodge Hex Tie Rod Adjuster for 2013-2025 Ram 2500 and 3500
  • Recommended when the existing sleeve has been damaged or adjustments are needed
  • Fully djustable hex shaped sleeves replace the round tie rod sleeve
  • Assures ease of adjustment without slippage
In Manufacturer stock, Ships Nov 24
C$209.00Was C$227.81 Save 8%
View
1/32in. DUO FIT SHIM (25)
  • Zinc coated for superior corrosion resistance
  • Fits openings from 9/16" to 5/8"
  • 1/32" Shim thickness
In Manufacturer stock, Ships Nov 24
C$48.99Was C$53.40 Save 8%
View
.13 deg. Camber/Toe SHIM for Nissan and Toyota
  • Full contact rear shims will correct camber and/or toe
  • 1 shim per wheel/per angle changed
  • Camber/Toe Change: .13 degrees
In Manufacturer stock, Ships Nov 24
C$34.99Was C$38.14 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$49.99Was C$54.49 Save 8%
View
1 deg. NYLON CAMBER SHIM for 12 vehicles
  • Rear Adjustment Range: Toe ±1.00°
  • Rear Adjustment Range: Toe ±1.00˚
  • Required: 1 per wheel
In Manufacturer stock, Ships Nov 24
C$34.99Was C$38.14 Save 8%
View
.25 deg. Camber/Toe SHIM for Nissan and Toyota
  • Full contact rear shims will correct camber and/or toe
  • 1 shim per wheel/per angle changed
  • Camber/Toe Change: .25 degrees
In Manufacturer stock, Ships Nov 24
C$34.99Was C$38.14 Save 8%
View
.38 deg. Camber/Toe SHIM for Nissan and Toyota
  • Full contact rear shims will correct camber and/or toe
  • 1 shim per wheel/per angle changed
  • Camber/Toe Change: .38 degrees
In Manufacturer stock, Ships Nov 24
C$34.99Was C$38.14 Save 8%
View
.50 deg. NYLON CAMBER SHIM for 12 vehicles
  • Rear Adjustment Range: Toe ±.50°
  • Rear Adjustment Range: Toe ±.50˚
  • Required: 1 per wheel
In Manufacturer stock, Ships Nov 24
C$34.99Was C$38.14 Save 8%
View
.50 deg. NYLON TOE SHIM for 12 vehicles
  • Rear Adjustment Range: Toe ±.50° (.25” / 1/4”)
  • Quickly change Toe on beam type axles
  • Required: 1 per wheel
In Manufacturer stock, Ships Nov 24
C$34.99Was C$38.14 Save 8%
View
.5 deg. Camber Shim for Ford and Mercury
  • Rear Adjustment Range: Camber ±0.50°
  • Includes Brake Caliper Shim
  • Required: 1 per wheel Only!
In Manufacturer stock, Ships Nov 24
C$37.99Was C$41.41 Save 8%
View
.75 deg. Camber Shim for Ford and Mercury
  • Rear Adjustment Range: Camber ±0.75°
  • Includes Brake Caliper Shim
  • Required: 1 per wheel Only!
In Manufacturer stock, Ships Nov 24
C$37.99Was C$41.41 Save 8%
View
996/997 981/987 Rear Performance Kit 6-arm set for Porsche
  • Control the suspension setting on your track ready Porsche with this 6-arm set
  • Will not work on rear of Xenon equipped headlamp models
  • Adds extra strength vs the OE arm
In Manufacturer stock, Ships Nov 24
C$2,939.00Was C$3,203.51 Save 8%
View
AL SHIMS 2.5X5X1.5 deg. (6)
  • Width - 2.5", Degree - 1.5, Length - 5"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 24
C$116.99Was C$127.52 Save 8%
View
AL SHIMS 2.5X5X4 deg. (6)
  • Width - 2.5", Degree - 4.0, Length - 5"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 24
C$128.99Was C$140.60 Save 8%
View
BREAK AWAY AXLE SHIMS(6) for Jeep
  • Box of (x6) Shims
  • 6 shims per box
  • Width: 1-3/4"
In Manufacturer stock, Ships Nov 24
C$192.99Was C$210.36 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$34.99Was C$38.14 Save 8%
View
CARBIDE INSERT-ACCUTURN
  • Three cutting edges for long life
  • Replaces OEM #433795
  • 5 bits per pack
In Manufacturer stock, Ships Nov 24
C$76.99Was C$83.92 Save 8%
View
CAS ADJ CAMS 2WD for Ford and Mazda
  • Front Adjustment Range: Caster ±2.00°
  • Provides adjustment for front caster
  • Required: 1 per wheel
In Manufacturer stock, Ships Nov 24
C$94.99Was C$103.54 Save 8%
View
Caster/Camber Shims 1/16 (50)
  • Zinc plated for superior corrosion resistance
  • Caster and Camber adjustment shim
  • 1/2" opening fits most imports
In Manufacturer stock, Ships Nov 24
C$104.99Was C$114.44 Save 8%
View
Caster/Camber Shims 1/16 (50)
  • Shim thickness: 1/16"
  • Box of (x50) Shims
  • 1-1/2 x 2-7/16
In Manufacturer stock, Ships Nov 24
C$133.99Was C$146.05 Save 8%
View
Caster/Camber Shims 1/32 (50)
  • Shim thickness: 1/32"
  • Box of (x50) Shims
  • 1-1/2 x 2-7/16
In Manufacturer stock, Ships Nov 24
C$102.99Was C$112.26 Save 8%
View
Cross Shaft: 6 11/16in. Center
  • Excellent strength-to-weight ratio
  • Shaft Hole Spacing: 6-11/16"
  • 4130 Chrome Moly
In Manufacturer stock, Ships Nov 24
C$249.00Was C$271.41 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$60.99Was C$66.48 Save 8%
View
DATSUN CAMBER KIT for BMW and Nissan
  • Adjust camber 0.75 by removing lower control arm attaching bolt and enlarging hole
  • Ensure bolt is long enough before cutting
  • Enlarge hole using SPC 73010 punch
In Manufacturer stock, Ships Nov 24
C$199.00Was C$216.91 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$209.00Was C$227.81 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$219.00Was C$238.71 Save 8%
View
EZ ON HD INT SLEEVES (6)
  • Threadless sleeve design allows quick & easy centering - a true time saver
  • Dimensions: 1.25" hole/.25" to .3125 depth
  • Comes in pack of 6 (6/pkg)
In Manufacturer stock, Ships Nov 24
C$139.99Was C$152.59 Save 8%
View
Flex Joint xAxis BUILDER SERIES 10mm X 40mm X 1.750
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 24
C$109.99Was C$119.89 Save 8%
View
F/LINER SHIM 1/16in.(6)
  • 1/16" (1.5875mm) Thickness
  • Box of (x6) Shims
  • 3" x 6"
In Manufacturer stock, Ships Nov 24
C$55.99Was C$61.03 Save 8%
View
Freightliner Shim 1/16in. (6)
  • 1/16" (1.5875mm) Thickness
  • Box of (x6) Shims
  • 1-9/16" x 3-3/4"
In Manufacturer stock, Ships Nov 24
C$42.99Was C$46.86 Save 8%
View
Freightliner Shim 1/32in. (6)
  • 1/32" (0.79375mm) Thickness
  • Box of (x6) Shims
  • 1-9/16" x 3-3/4"
In Manufacturer stock, Ships Nov 24
C$39.99Was C$43.59 Save 8%
View
Freightliner Shim 1/8in. (6)
  • 1/8" (0.3175mm) Thickness
  • Box of (x6) Shims
  • 1-9/16" x 3-3/4"
In Manufacturer stock, Ships Nov 24
C$45.99Was C$50.13 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$49.99Was C$54.49 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$229.00Was C$249.61 Save 8%
View
Kenworth Shim 1/2 (6)
  • Tandem Alignment shims for all your HD needs
  • Included in SPC #36000 Shim assortment
  • Kenworth Airglide space 1/2
In Manufacturer stock, Ships Nov 24
C$101.99Was C$111.17 Save 8%
View
L RND RECVR 7/8-14
  • 4140 N Chromoly Steel and Grade 8 Bolt
  • Left Hand thread rod end receiver
  • Welds into stock tubing sizes
In Manufacturer stock, Ships Nov 24
C$259.00Was C$282.31 Save 8%
View
MBZ SHIMS 4X6.5X4 deg.(6)
  • Manganese Bronze construction provides top compression strength and hardness
  • Width - 4", Degree - 4.0°, Length - 6.5"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 24
C$1,089.00Was C$1,187.01 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$56.99Was C$62.12 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$53.99Was C$58.85 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$56.99Was C$62.12 Save 8%
View
R RND RECVR 5/8-18
  • 4140 N Chromoly Steel and Grade 8 Bolt
  • Right Hand thread rod end receiver
  • Welds into stock tubing sizes
In Manufacturer stock, Ships Nov 24
C$229.00Was C$249.61 Save 8%
View