Trade prices for dealers.

0

SPC Performance parts

In stock
In Manufacturer stock, Ships Nov 24
C$41.99Was C$45.77 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$52.99Was C$57.76 Save 8%
View
xAxis Jeep TJ FUCA
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 24
C$101.99Was C$111.17 Save 8%
View
ZINC SHIMS 3 x 6 x 0.5 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3", Degree - 0.5, Length - 6"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 24
C$190.99Was C$208.18 Save 8%
View
ZINC SHIMS 3 x 6 x 1.0 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3", Degree - 1.0, Length - 6"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 24
C$197.99Was C$215.81 Save 8%
View
1/16in. DUO FIT SHIM (25)
  • Zinc coated for superior corrosion resistance
  • Fits openings from 7/16" to 1/2"
  • 1/16" Shim thickness
In Manufacturer stock, Ships Nov 24
C$73.99Was C$80.65 Save 8%
View
1/16in. DUO FIT SHIM (25)
  • Zinc coated for superior corrosion resistance
  • Fits openings from 9/16" to 5/8"
  • 1/16" Shim thickness
In Manufacturer stock, Ships Nov 24
C$42.99Was C$46.86 Save 8%
View
.30 deg. NYLON TOE SHIM for 12 vehicles
  • Rear Adjustment Range: Toe ±.30° (.15” / 5/32”)
  • Quickly change Toe on beam type axles
  • Required: 1 per wheel
In Manufacturer stock, Ships Nov 24
C$34.99Was C$38.14 Save 8%
View
3 in. HD Support Plate(6)
  • Box of (x6) Shims
  • 1/8" thickness
  • 6 per pack
In Manufacturer stock, Ships Nov 24
C$289.00Was C$315.01 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$549.00Was C$598.41 Save 8%
View
AL SHIMS 3X6X2.5 deg.(6)
  • Width - 3", Degree - 2.5, Length - 6"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 24
C$134.99Was C$147.14 Save 8%
View
AL SHIMS 3X6X3.5 deg.(6)
  • Width - 3", Degree - 3.5, Length - 6"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 24
C$145.99Was C$159.13 Save 8%
View
AL SHIMS 4X6.5X3 deg.(6)
  • Width - 4", Degree - 3.0, Length - 6.5"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 24
C$197.99Was C$215.81 Save 8%
View
B9 Upper Control Arm Front Left for Audi
  • Adjusts camber and caster plus or minus 1.5 degrees
  • Kit includes both arms for the LEFT side only
  • Comes with pinch bolt hardware
In Manufacturer stock, Ships Nov 24
C$739.00Was C$805.51 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$145.99Was C$159.13 Save 8%
View
CAST SHIM 1/32in. (6) for Jeep
  • Stackable for larger changes
  • Shim thickness: 1/32"
  • Pack of 6
In Manufacturer stock, Ships Nov 24
C$48.99Was C$53.40 Save 8%
View
Early GM Metric B/Joint for 76 vehicles
  • Mounting hardware included
  • Requires one per wheel
  • Grease-able design
In Manufacturer stock, Ships Nov 24
C$195.99Was C$213.63 Save 8%
View
EZ ON HD INT SLEEVES (6)
  • Dimensions: 1.28" hole /.5" depth
  • Comes in pack of 6 (6/pkg)
  • For Aluminum Wheels
In Manufacturer stock, Ships Nov 24
C$149.99Was C$163.49 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$27.99Was C$30.51 Save 8%
View
Front Lower Control Arm for Jeep
  • Dual-threaded adjuster and jam nut makes caster/pinion angle adjustments quick and easy
  • Adds strength and articulation flexibility to your stock-height or lifted' Wrangler.
  • xAxis sealed flex joint for bind free articulation
In Manufacturer stock, Ships Nov 24
C$429.00Was C$467.61 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$239.00Was C$260.51 Save 8%
View
L RND RECVR 1 1/4-12
  • 4140 N Chromoly Steel and Grade 8 Bolt
  • Left Hand thread rod end receiver
  • Welds into stock tubing sizes
In Manufacturer stock, Ships Nov 24
C$309.00Was C$336.81 Save 8%
View
MBZ SHIMS 4X6.5X3.5 deg.(6)
  • Manganese Bronze construction provides top compression strength and hardness
  • Width - 4", Degree - 3.5°, Length - 6.5"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 24
C$1,009.00Was C$1,099.81 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$52.99Was C$57.76 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$63.99Was C$69.75 Save 8%
View
R RND RECVR 7/8-14
  • 4140 N Chromoly Steel and Grade 8 Bolt
  • Right Hand thread rod end receiver
  • Welds into stock tubing sizes
In Manufacturer stock, Ships Nov 24
C$279.00Was C$304.11 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$40.99Was C$44.68 Save 8%
View
Steel Shim 4X6.5X3 - Pack of 6
  • Spring width - 4", Pad Length - 6.5", 3.0 Degree change
  • Top of the line steel construction
  • Maximum compression strength
In Manufacturer stock, Ships Nov 24
C$709.00Was C$772.81 Save 8%
View
Upper Control Arm Front Left for Audi and Porsche
  • Adjusts camber and caster plus or minus 1.5 degrees
  • Kit includes both arms for the LEFT side only
  • Comes with pinch bolt hardware
In Manufacturer stock, Ships Nov 24
C$739.00Was C$805.51 Save 8%
View
Weld-In Ring Kit 1.75 in. ID
  • Designed with optimal press fit for the xAxis
  • Use with SPC xAxis sealed flex joint
  • Includes two snap rings
In Manufacturer stock, Ships Nov 24
C$46.99Was C$51.22 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$51.99Was C$56.67 Save 8%
View
xAxis Balljoint
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 24
C$114.99Was C$125.34 Save 8%
View
xAxis Jeep Track Bar
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 24
C$86.99Was C$94.82 Save 8%
View
ZINC SHIMS 3.5x6.25x3.0 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3.5", Degree - 3.0, Length - 6.25"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 24
C$309.00Was C$336.81 Save 8%
View
ZINC SHIMS 4x6.5x5.0 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 4", Degree - 5.0, Length - 6.5"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 24
C$449.00Was C$489.41 Save 8%
View
1-1/2in. SOCKET 12 PT. for Ford and Mazda
  • Plated and polished surface for long service life
  • Works with pinch bolt style suspensions
  • 1/2" Drive 12-pt 1-1/2" socket
In Manufacturer stock, Ships Nov 24
C$90.99Was C$99.18 Save 8%
View
1-1/4 deg. Camber/Caster Sleeve for Ford
  • Clear Zinc coating for corrosion resistance
  • Recommended Tools: 77880 - Sleeve Puller
  • Required: 1 per wheel
In Manufacturer stock, Ships Nov 24
C$52.99Was C$57.76 Save 8%
View
1/8in. DUO FIT SHIM (25)
  • Zinc coated for superior corrosion resistance
  • Fits openings from 9/16" to 5/8"
  • 1/8" Shim thickness
In Manufacturer stock, Ships Nov 24
C$58.99Was C$64.30 Save 8%
View
.50 deg. Camber/Toe SHIM for Nissan and Toyota
  • Full contact rear shims will correct camber and/or toe
  • 1 shim per wheel/per angle changed
  • Camber/Toe Change: .50 degrees
In Manufacturer stock, Ships Nov 24
C$34.99Was C$38.14 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$459.00Was C$500.31 Save 8%
View
AL SHIMS 2.5X5X2 deg. (6)
  • Width - 2.5", Degree - 2.0, Length - 5"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 24
C$117.99Was C$128.61 Save 8%
View
AL SHIMS 2.5X5X3.5 deg.(6)
  • Width - 2.5", Degree - 3.5, Length - 5"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 24
C$127.99Was C$139.51 Save 8%
View
Caster/Camber Shims 1/32 (50)
  • Shim thickness: 1/32"
  • Box of (x50) Shims
  • 1-1/8" x 1-1/8"
In Manufacturer stock, Ships Nov 24
C$64.99Was C$70.84 Save 8%
View
Caster/Camber Shims 3/16 (50)
  • Zinc plated for superior corrosion resistance
  • Caster and Camber adjustment shim
  • 1/2" opening fits most imports
In Manufacturer stock, Ships Nov 24
C$50.99Was C$55.58 Save 8%
View
GM Rear Toe + - .40 Shim for Chevrolet, Buick and Cadillac
  • Make rear wheel alignment changes on twist beam axles with stackable fixed change shims
  • Stack up to two shims for maximum change
  • Change +/- .40 degrees
In Manufacturer stock, Ships Nov 24
C$34.99Was C$38.14 Save 8%
View
L RD RECVR 7/8-14
  • 4140 N Chromoly Steel and Grade 8 Bolt
  • Left Hand thread rod end receiver
  • Welds into stock tubing sizes
In Manufacturer stock, Ships Nov 24
C$259.00Was C$282.31 Save 8%
View
MBZ SHIMS 4X6.5X2.5 deg.(6)
  • Manganese Bronze construction provides top compression strength and hardness
  • Width - 4", Degree - 2.5°, Length - 6.5"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 24
C$919.00Was C$1,001.71 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$43.99Was C$47.95 Save 8%
View
RECVNG TUBE 2.625ID
  • Black oxide coated for long service life
  • Receiving tube - 2.87OD x 2.62ID
  • Sold each
In Manufacturer stock, Ships Nov 24
C$96.99Was C$105.72 Save 8%
View
R RND REC 7/8-14
  • 4140 N Chromoly Steel and Grade 8 Bolt
  • Left Hand thread rod end receiver
  • Welds into stock tubing sizes
In Manufacturer stock, Ships Nov 24
C$259.00Was C$282.31 Save 8%
View
R RND RECVR 1 1/4-12
  • 4140 N Chromoly Steel and Grade 8 Bolt
  • Right Hand thread rod end receiver
  • Welds into stock tubing sizes
In Manufacturer stock, Ships Nov 24
C$279.00Was C$304.11 Save 8%
View
R RND RECVR 3/4-16
  • 4140 N Chromoly Steel and Grade 8 Bolt
  • Right Hand thread rod end receiver
  • Welds into stock tubing sizes
In Manufacturer stock, Ships Nov 24
C$229.00Was C$249.61 Save 8%
View
Upper Control Arm Front Right for Audi and Porsche
  • Adjusts camber and caster plus or minus 1.5 degrees
  • Kit includes both arms for the RIGHT side only
  • Comes with pinch bolt hardware
In Manufacturer stock, Ships Nov 24
C$739.00Was C$805.51 Save 8%
View
Weld-In Ring Kit 1.81 in. ID
  • Designed with optimal press fit for the xAxis
  • Use with SPC xAxis sealed flex joint
  • Includes two snap rings
In Manufacturer stock, Ships Nov 24
C$46.99Was C$51.22 Save 8%
View
Weld-In Ring Kit 2.00 in. ID
  • Designed with optimal press fit for the xAxis
  • Use with SPC xAxis sealed flex joint
  • Includes two snap rings
In Manufacturer stock, Ships Nov 24
C$48.99Was C$53.40 Save 8%
View
xAxis Sealed Flex Joint
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 24
C$92.99Was C$101.36 Save 8%
View
xAxis Sealed Flex Joint
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 24
C$93.99Was C$102.45 Save 8%
View
ZINC SHIMS 2.5x5x2.0 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 2.5", Degree - 2.0, Length - 5"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 24
C$192.99Was C$210.36 Save 8%
View
ZINC SHIMS 2.5x5x3.5 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 2.5", Degree - 3.5, Length - 5"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 24
C$229.00Was C$249.61 Save 8%
View
.06 deg. Camber/Toe SHIM for Nissan and Toyota
  • Full contact rear shims will correct camber and/or toe
  • 1 shim per wheel/per angle changed
  • Camber/Toe Change: .06 degrees
In Manufacturer stock, Ships Nov 24
C$34.99Was C$38.14 Save 8%
View
1/32in. DUO FIT SHIM (25)
  • Zinc coated for superior corrosion resistance
  • Fits openings from 7/16" to 1/2"
  • 1/32" Shim thickness
In Manufacturer stock, Ships Nov 24
C$54.99Was C$59.94 Save 8%
View
.80 deg. NYLON TOE SHIM for 12 vehicles
  • Rear Adjustment Range: Toe ±.80° (.40” / 3/8”)
  • Quickly change Toe on beam type axles
  • Required: 1 per wheel
In Manufacturer stock, Ships Nov 24
C$34.99Was C$38.14 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$1,769.00Was C$1,928.21 Save 8%
View
AL SHIMS 2.5X5X2.5 deg.(6)
  • Width - 2.5", Degree - 2.5, Length - 5"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 24
C$121.99Was C$132.97 Save 8%
View
AL SHIMS 2.5X5 X 3 deg.(6)
  • Width - 2.5", Degree - 3.0, Length - 5"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 24
C$123.99Was C$135.15 Save 8%
View
AL SHIMS 3.5X6.25X3 deg.(6)
  • Width - 3.5", Degree - 3.0, Length - 6.25"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 24
C$185.99Was C$202.73 Save 8%
View
AL SHIMS 3X6X1.5 deg.(6)
  • Width - 3", Degree - 1.5, Length - 6"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 24
C$126.99Was C$138.42 Save 8%
View
AL SHIS 3.5X6.25X3.5 deg.(6)
  • Width - 3.5", Degree - 3.5, Length - 6.25"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 24
C$192.99Was C$210.36 Save 8%
View
BREAK AWAY AXLE SHIMS(6) for Jeep
  • Box of (x6) Shims
  • 6 shims per box
  • Width: 1-3/4"
In Manufacturer stock, Ships Nov 24
C$190.99Was C$208.18 Save 8%
View
CAMBER ADJUSTMENT KIT for 13 vehicles
  • Provides up to 2-1/2 front camber change
  • Coated for best corrosion protection
  • One kit services full axle
In Manufacturer stock, Ships Nov 24
C$68.99Was C$75.20 Save 8%
View