Trade prices for dealers.

0

SPC Performance parts

In stock
In Manufacturer stock, Ships Nov 24
C$60.99Was C$66.48 Save 8%
View
DATSUN CAMBER KIT for BMW and Nissan
  • Adjust camber 0.75 by removing lower control arm attaching bolt and enlarging hole
  • Ensure bolt is long enough before cutting
  • Enlarge hole using SPC 73010 punch
In Manufacturer stock, Ships Nov 24
C$199.00Was C$216.91 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$209.00Was C$227.81 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$219.00Was C$238.71 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$219.00Was C$238.71 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$219.00Was C$238.71 Save 8%
View
Flex Joint xAxis BUILDER SERIES 10mm X 40mm X 1.750
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 24
C$109.99Was C$119.89 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$49.99Was C$54.49 Save 8%
View
GM Rear Camber -.50 Shim for Chevrolet, Buick and Cadillac
  • Make rear wheel alignment changes on twist beam axles with stackable fixed change shims
  • Stack up to two shims for maximum change
  • Change +/- .50 degrees
In Manufacturer stock, Ships Nov 24
C$35.99Was C$39.23 Save 8%
View
JAM NUT FOR 499
  • Fits SPC #499 Flange Axle Puller
  • Zinc plated for years of service
  • Replacement Jam Nut Only
In Manufacturer stock, Ships Nov 24
C$27.99Was C$30.51 Save 8%
View
Kenworth Shim 1in. (6)
  • Tandem Alignment shims for all your HD needs
  • Included in SPC #36000 Shim assortment
  • Kenworth Airglide space 1
In Manufacturer stock, Ships Nov 24
C$145.99Was C$159.13 Save 8%
View
PRO CUT ON THE CAR
  • Designed for the PRO CUT on car lathes
  • Deflects chips and dampens chatter
  • Fits on top of the cutting tools
In Manufacturer stock, Ships Nov 24
C$112.99Was C$123.16 Save 8%
View
Rear Performance Kit for Ford and Lincoln
  • Stronger, more robust arm than the OE arm
  • Reduced weight vs the OE arm
  • One kit per axle
In Manufacturer stock, Ships Nov 24
C$1,609.00Was C$1,753.81 Save 8%
View
In Manufacturer stock, Ships Nov 24
C$56.99Was C$62.12 Save 8%
View
Repl. Ball Joint Kit FOR SPC ARMS for Toyota and Lexus
  • Fully sealed boot to keep grease in and contaminants out for a maintenance-free joint
  • High strength steel forging with offsets provides camber & caster adjustability
  • One piece polymer race tests like OE and provides low & smooth turning torque
In Manufacturer stock, Ships Nov 24
C$489.00Was C$533.01 Save 8%
View
R SQR RECVR 1/2-20
  • 4140 N Chromoly Steel and Grade 8 Bolt
  • Right Hand thread rod end receiver
  • Welds into stock tubing sizes
In Manufacturer stock, Ships Nov 24
C$269.00Was C$293.21 Save 8%
View
UNIV CAMBER/CASTER TOOL for Dodge, Chrysler and Mitsubishi
  • Perfect for most older Chrysler and Ford SLA vehicle models
  • Zinc plated finish for years of service life
  • Comfortable handle grip for easy adjustment
In Manufacturer stock, Ships Nov 24
C$259.00Was C$282.31 Save 8%
View
Weld-In Ring Kit 2.50 in. ID
  • Designed with optimal press fit for the xAxis
  • Use with SPC xAxis sealed flex joint
  • Includes two snap rings
In Manufacturer stock, Ships Nov 24
C$48.99Was C$53.40 Save 8%
View
xAxis Balljoint
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 24
C$120.99Was C$131.88 Save 8%
View
xAxis Balljoint
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 24
C$184.99Was C$201.64 Save 8%
View
xAxis Jeep TJ/JK FLCA
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 24
C$130.99Was C$142.78 Save 8%
View
xAxis Sealed Flex Joint
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 24
C$195.99Was C$213.63 Save 8%
View
xAxis Sealed Flex Joint RH 3/4in-16x12mm BH x 2in W
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: RH 3/4"-16 X 12MM BH X 2" W
In Manufacturer stock, Ships Nov 24
C$209.00Was C$227.81 Save 8%
View
ZINC SHIMS 2.5x5x1.5 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 2.5", Degree - 1.5, Length - 5"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 24
C$184.99Was C$201.64 Save 8%
View
ZINC SHIMS 2.5x5x4.0 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 2.5", Degree - 4.0, Length - 5"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 24
C$229.00Was C$249.61 Save 8%
View
ZINC SHIMS 3.5x6.25x2.5 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3.5", Degree - 2.5, Length - 6.25"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 24
C$289.00Was C$315.01 Save 8%
View
ZINC SHIMS 3.5x6.25x3.5 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3.5", Degree - 3.5, Length - 6.25"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 24
C$329.00Was C$358.61 Save 8%
View
ZINC SHIMS 3.5x6.25x4.0 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3.5", Degree - 4.0, Length - 6.25"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 24
C$349.00Was C$380.41 Save 8%
View