Trade prices for dealers.

0

SPC Performance parts

In stock
In Manufacturer stock, Ships Nov 25
C$219.00Was C$238.71 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$219.00Was C$238.71 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$219.00Was C$238.71 Save 8%
View
Flex Joint xAxis BUILDER SERIES 10mm X 40mm X 1.750
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 25
C$109.99Was C$119.89 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$49.99Was C$54.49 Save 8%
View
GM Rear Camber -.50 Shim for Chevrolet, Buick and Cadillac
  • Make rear wheel alignment changes on twist beam axles with stackable fixed change shims
  • Stack up to two shims for maximum change
  • Change +/- .50 degrees
In Manufacturer stock, Ships Nov 25
C$35.99Was C$39.23 Save 8%
View
JAM NUT FOR 499
  • Fits SPC #499 Flange Axle Puller
  • Zinc plated for years of service
  • Replacement Jam Nut Only
In Manufacturer stock, Ships Nov 25
C$27.99Was C$30.51 Save 8%
View
Kenworth Shim 1in. (6)
  • Tandem Alignment shims for all your HD needs
  • Included in SPC #36000 Shim assortment
  • Kenworth Airglide space 1
In Manufacturer stock, Ships Nov 25
C$145.99Was C$159.13 Save 8%
View
PRO CUT ON THE CAR
  • Designed for the PRO CUT on car lathes
  • Deflects chips and dampens chatter
  • Fits on top of the cutting tools
In Manufacturer stock, Ships Nov 25
C$112.99Was C$123.16 Save 8%
View
Rear Performance Kit for Ford and Lincoln
  • Stronger, more robust arm than the OE arm
  • Reduced weight vs the OE arm
  • One kit per axle
In Manufacturer stock, Ships Nov 25
C$1,609.00Was C$1,753.81 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$56.99Was C$62.12 Save 8%
View
Repl. Ball Joint Kit FOR SPC ARMS for Toyota and Lexus
  • Fully sealed boot to keep grease in and contaminants out for a maintenance-free joint
  • High strength steel forging with offsets provides camber & caster adjustability
  • One piece polymer race tests like OE and provides low & smooth turning torque
In Manufacturer stock, Ships Nov 25
C$489.00Was C$533.01 Save 8%
View
R SQR RECVR 1/2-20
  • 4140 N Chromoly Steel and Grade 8 Bolt
  • Right Hand thread rod end receiver
  • Welds into stock tubing sizes
In Manufacturer stock, Ships Nov 25
C$269.00Was C$293.21 Save 8%
View
UNIV CAMBER/CASTER TOOL for Dodge, Chrysler and Mitsubishi
  • Perfect for most older Chrysler and Ford SLA vehicle models
  • Zinc plated finish for years of service life
  • Comfortable handle grip for easy adjustment
In Manufacturer stock, Ships Nov 25
C$259.00Was C$282.31 Save 8%
View
Weld-In Ring Kit 2.50 in. ID
  • Designed with optimal press fit for the xAxis
  • Use with SPC xAxis sealed flex joint
  • Includes two snap rings
In Manufacturer stock, Ships Nov 25
C$48.99Was C$53.40 Save 8%
View
xAxis Balljoint
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 25
C$120.99Was C$131.88 Save 8%
View
xAxis Balljoint
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 25
C$184.99Was C$201.64 Save 8%
View
xAxis Jeep TJ/JK FLCA
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 25
C$130.99Was C$142.78 Save 8%
View
xAxis Sealed Flex Joint
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 25
C$195.99Was C$213.63 Save 8%
View
xAxis Sealed Flex Joint RH 3/4in-16x12mm BH x 2in W
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: RH 3/4"-16 X 12MM BH X 2" W
In Manufacturer stock, Ships Nov 25
C$209.00Was C$227.81 Save 8%
View
ZINC SHIMS 2.5x5x1.5 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 2.5", Degree - 1.5, Length - 5"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$184.99Was C$201.64 Save 8%
View
ZINC SHIMS 2.5x5x4.0 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 2.5", Degree - 4.0, Length - 5"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$229.00Was C$249.61 Save 8%
View
ZINC SHIMS 3.5x6.25x2.5 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3.5", Degree - 2.5, Length - 6.25"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$289.00Was C$315.01 Save 8%
View
ZINC SHIMS 3.5x6.25x3.5 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3.5", Degree - 3.5, Length - 6.25"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$329.00Was C$358.61 Save 8%
View
ZINC SHIMS 3.5x6.25x4.0 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3.5", Degree - 4.0, Length - 6.25"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$349.00Was C$380.41 Save 8%
View
ZINC SHIMS 3 x 6 x 2.5 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3", Degree - 2.5, Length - 6"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$249.00Was C$271.41 Save 8%
View
ZINC SHIMS 3 x 6 x 3.5 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3", Degree - 3.5, Length - 6"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$289.00Was C$315.01 Save 8%
View
Zinc Shims 4X6.5X4.0 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 4", Degree - 4.0, Length - 6.5"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$399.00Was C$434.91 Save 8%
View
.13 deg. Camber/Toe SHIM for Nissan and Toyota
  • Full contact rear shims will correct camber and/or toe
  • 1 shim per wheel/per angle changed
  • Camber/Toe Change: .13 degrees
In Manufacturer stock, Ships Nov 25
C$34.99Was C$38.14 Save 8%
View
.25 deg. Camber/Toe SHIM for Nissan and Toyota
  • Full contact rear shims will correct camber and/or toe
  • 1 shim per wheel/per angle changed
  • Camber/Toe Change: .25 degrees
In Manufacturer stock, Ships Nov 25
C$34.99Was C$38.14 Save 8%
View
.40 deg. NYLON TOE SHIM for 12 vehicles
  • Rear Adjustment Range: Toe ±.40° (.20” / 3/16”)
  • Quickly change Toe on beam type axles
  • Required: 1 per wheel
In Manufacturer stock, Ships Nov 25
C$35.99Was C$39.23 Save 8%
View
.50 deg. NYLON TOE SHIM for 12 vehicles
  • Rear Adjustment Range: Toe ±.50° (.25” / 1/4”)
  • Quickly change Toe on beam type axles
  • Required: 1 per wheel
In Manufacturer stock, Ships Nov 25
C$35.99Was C$39.23 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$229.00Was C$249.61 Save 8%
View
B9 Upper Control Arm Front Right for Audi
  • Adjusts camber and caster plus or minus 1.5 degrees
  • Kit includes both arms for the RIGHT side only
  • Comes with pinch bolt hardware
In Manufacturer stock, Ships Nov 25
C$739.00Was C$805.51 Save 8%
View
BREAK AWAY AXLE SHIMS(6) for Jeep
  • Box of (x6) Shims
  • 6 shims per box
  • Width: 1-3/4"
In Manufacturer stock, Ships Nov 25
C$148.99Was C$162.40 Save 8%
View
BREAK AWAY AXLE SHIMS(6) for Jeep
  • Box of (x6) Shims
  • 6 shims per box
  • Width: 1-3/4"
In Manufacturer stock, Ships Nov 25
C$198.99Was C$216.90 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$34.99Was C$38.14 Save 8%
View
Caster/Camber Shims 1/16 (50)
  • Zinc plated for superior corrosion resistance
  • Caster and Camber adjustment shim
  • 1/2" opening fits most imports
In Manufacturer stock, Ships Nov 25
C$104.99Was C$114.44 Save 8%
View
Caster/Camber Shims 1/64 (50)
  • "N" Style Universal 1/2" slot shim
  • Shim thickness: 1/64"
  • Comes in a pack of 50
In Manufacturer stock, Ships Nov 25
C$37.99Was C$41.41 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$219.00Was C$238.71 Save 8%
View
EZ ON HD INT SLEEVES (6)
  • Threadless sleeve design allows quick & easy centering - a true time saver
  • Dimensions: 1.34" to 1.37" hole /.5" depth
  • Comes in pack of 6 (6/pkg)
In Manufacturer stock, Ships Nov 25
C$149.99Was C$163.49 Save 8%
View
EZ ON HD INT SLEEVES (6)
  • Dimensions: 1.28" hole /.5" depth
  • Comes in pack of 6 (6/pkg)
  • For Steel Wheels
In Manufacturer stock, Ships Nov 25
C$139.99Was C$152.59 Save 8%
View
Flex Joint xAxis Jeep JK Rear UCA 14mm X 2 X 1.8125
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 25
C$107.99Was C$117.71 Save 8%
View
F/LINER SHIM 1/16in.(6)
  • 1/16" (1.5875mm) Thickness
  • Box of (x6) Shims
  • 3" x 6"
In Manufacturer stock, Ships Nov 25
C$55.99Was C$61.03 Save 8%
View
Forged Receiver Assembly
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: LH 3/4"-16 X 14MM BH X 2.375"W
In Manufacturer stock, Ships Nov 25
C$209.00Was C$227.81 Save 8%
View
GM Rear Camber -.25 Shim for Chevrolet, Buick and Cadillac
  • Make rear wheel alignment changes on twist beam axles with stackable fixed change shims
  • Stack up to two shims for maximum change
  • Change +/- .25 degrees
In Manufacturer stock, Ships Nov 25
C$35.99Was C$39.23 Save 8%
View
GM Rear Toe + - .50 Shim for Chevrolet, Buick and Cadillac
  • Make rear wheel alignment changes on twist beam axles with stackable fixed change shims
  • Stack up to two shims for maximum change
  • Change +/- .50 degrees
In Manufacturer stock, Ships Nov 25
C$35.99Was C$39.23 Save 8%
View
MBZ SHIMS 4X6.5X2 deg.(6)
  • Manganese Bronze construction provides top compression strength and hardness
  • Width - 4", Degree - 2.0°, Length - 6.5"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$899.00Was C$979.91 Save 8%
View
MBZ SHIMS 4X6.5X4 deg.(6)
  • Manganese Bronze construction provides top compression strength and hardness
  • Width - 4", Degree - 4.0°, Length - 6.5"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$1,089.00Was C$1,187.01 Save 8%
View
PITMAN ARM SEPARATOR
  • Zinc plated for long service life
  • 12" overall length
  • 1" opening
In Manufacturer stock, Ships Nov 25
C$57.99Was C$63.21 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$1,239.00Was C$1,350.51 Save 8%
View
Rear Shim Set (18 pc) for 2016-2022 Honda HR-V
  • Pefect for dialing in Toe and Caster at one time
  • Use up to 2 shims for desired change
  • Camber and Toe Kit for Honda HR-V
In Manufacturer stock, Ships Nov 25
C$849.00Was C$925.41 Save 8%
View
Rear Toe Shim Set (8) for 2012-2017 Hyundai Accent and Kia Rio
  • Correct toe and thrust angle issues to improve drivability, tire life
  • Solve adjustability on Kia/Hyundai rear twist beam axle
  • OE does not provide any method to adjust toe.
In Manufacturer stock, Ships Nov 25
C$195.99Was C$213.63 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$39.99Was C$43.59 Save 8%
View
U ADPTRS FOR 40910 (3)
  • Includes (x3) Bushing U-adaptors
  • Fits SPC #40910
In Manufacturer stock, Ships Nov 25
C$41.99Was C$45.77 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: LH 1"-14 X 9/16" BH X 2.625" W
In Manufacturer stock, Ships Nov 25
C$259.00Was C$282.31 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: LH 3/4" - 16 X 12mm BH X 50mm W
In Manufacturer stock, Ships Nov 25
C$209.00Was C$227.81 Save 8%
View
ZINC SHIMS 3.5x6.25x2.0 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3.5", Degree - 2.0, Length - 6.25"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$269.00Was C$293.21 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$115.99Was C$126.43 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$239.00Was C$260.51 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$309.00Was C$336.81 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$359.00Was C$391.31 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$104.99Was C$114.44 Save 8%
View
AL SHIMS 3X6 X 0.5 deg.(6)
  • Width - 3", Degree - 0.5, Length - 6"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 25
C$117.99Was C$128.61 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$249.00Was C$271.41 Save 8%
View
CARBIDE INSERTS-PRO-CUT
  • For Pro-Cut Model 610 on-car lathes
  • Pro-Cut Part# 50-741,50-742
  • 10 bits per pack
In Manufacturer stock, Ships Nov 25
C$191.99Was C$209.27 Save 8%
View
CAST SHIM 1/16in. (6) for Jeep
  • Stackable for larger changes
  • Shim thickness: 1/16"
  • Pack of 6
In Manufacturer stock, Ships Nov 25
C$42.99Was C$46.86 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$40.99Was C$44.68 Save 8%
View
EXTENDED LENGTH UPPER for 19 vehicles
  • Mounting hardware included
  • Requires one per wheel
  • Grease-able design
In Manufacturer stock, Ships Nov 25
C$419.00Was C$456.71 Save 8%
View
FRONT HUB & AXLE PULLER
  • Perfect for independent suspension vehicles
  • Can be used in conjunction with SPC #499
  • Includes flange screw and jab nut
In Manufacturer stock, Ships Nov 25
C$129.99Was C$141.69 Save 8%
View
Muscle Car Arm Rebuild Kit
  • Rebuilds ball joint for SPC 97183 control arms
  • All inclusive Rebuild Kit
  • 7.30degree taper
In Manufacturer stock, Ships Nov 25
C$112.99Was C$123.16 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$94.99Was C$103.54 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$399.00Was C$434.91 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$469.00Was C$511.21 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: RH 1"-14 X 9/16" BH X 2.625" W
In Manufacturer stock, Ships Nov 25
C$249.00Was C$271.41 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: LH 1/2"-20 X 3/8" BH X 1.5" W
In Manufacturer stock, Ships Nov 25
C$194.99Was C$212.54 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: RH 1-1/4"-12 X 5/8" BH X 2.5" W
In Manufacturer stock, Ships Nov 25
C$289.00Was C$315.01 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: RH 3/4 - 16 X 12mm BH X 45mm W
In Manufacturer stock, Ships Nov 25
C$209.00Was C$227.81 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: RH M18X1.5 X 12mm BH X 50mm W
In Manufacturer stock, Ships Nov 25
C$209.00Was C$227.81 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: RH M18X1.5 X 12mm BH X 57mm W
In Manufacturer stock, Ships Nov 25
C$209.00Was C$227.81 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$70.99Was C$77.38 Save 8%
View