Trade prices for dealers.

0

SPC Performance parts

In stock
Flex Joint xAxis Jeep JK Front UCA 12mm X 2 X 1.8125
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 25
C$112.99Was C$123.16 Save 8%
View
Freightliner Shim 1/8in. (6)
  • 1/8" (0.3175mm) Thickness
  • Box of (x6) Shims
  • 1-9/16" x 3-3/4"
In Manufacturer stock, Ships Nov 25
C$46.99Was C$51.22 Save 8%
View
GM Rear Toe + - .40 Shim for Chevrolet, Buick and Cadillac
  • Make rear wheel alignment changes on twist beam axles with stackable fixed change shims
  • Stack up to two shims for maximum change
  • Change +/- .40 degrees
In Manufacturer stock, Ships Nov 25
C$35.99Was C$39.23 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$229.00Was C$249.61 Save 8%
View
Kenworth Shim 1/2 (6)
  • Tandem Alignment shims for all your HD needs
  • Included in SPC #36000 Shim assortment
  • Kenworth Airglide space 1/2
In Manufacturer stock, Ships Nov 25
C$101.99Was C$111.17 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$39.99Was C$43.59 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$52.99Was C$57.76 Save 8%
View
Right Adjustable Control Arm for Audi and Volkswagen
  • Adjusts camber and caster plus or minus 1.5 degrees
  • Kit includes both arms for the RIGHT side only
  • Comes with pinch bolt hardware
In Manufacturer stock, Ships Nov 25
C$739.00Was C$805.51 Save 8%
View
R RND RECVR 3/4-16
  • 4140 N Chromoly Steel and Grade 8 Bolt
  • Right Hand thread rod end receiver
  • Welds into stock tubing sizes
In Manufacturer stock, Ships Nov 25
C$229.00Was C$249.61 Save 8%
View
Steel Shim 4X6.5X2 - Pack of 6
  • Spring width - 4", Pad Length - 6.5", 2.0 Degree change
  • Top of the line steel construction
  • Maximum compression strength
In Manufacturer stock, Ships Nov 25
C$609.00Was C$663.81 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$44.99Was C$49.04 Save 8%
View
Upper Control Arm Front Right for Audi and Porsche
  • Adjusts camber and caster plus or minus 1.5 degrees
  • Kit includes both arms for the RIGHT side only
  • Comes with pinch bolt hardware
In Manufacturer stock, Ships Nov 25
C$739.00Was C$805.51 Save 8%
View
Weld-In Ring Kit 2.00 in. ID
  • Designed with optimal press fit for the xAxis
  • Use with SPC xAxis sealed flex joint
  • Includes two snap rings
In Manufacturer stock, Ships Nov 25
C$48.99Was C$53.40 Save 8%
View
Weld-In Ring Kit 40 mm ID
  • Designed with optimal press fit for the xAxis
  • Use with SPC xAxis sealed flex joint
  • Includes two snap rings
In Manufacturer stock, Ships Nov 25
C$45.99Was C$50.13 Save 8%
View
xAxis Jeep Track Bar
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 25
C$86.99Was C$94.82 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: RH 3/4" - 16 X 12mm BH X 50mm W
In Manufacturer stock, Ships Nov 25
C$209.00Was C$227.81 Save 8%
View
xAxis Rod End Ball Joint
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: LH 3/4" - 16 X 12mm BH X 57mm W
In Manufacturer stock, Ships Nov 25
C$219.00Was C$238.71 Save 8%
View
xAxis Sealed Flex Joint
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 25
C$92.99Was C$101.36 Save 8%
View
ZINC SHIMS 2.5x5x0.5 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 2.5", Degree - 0.5, Length - 5"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$133.99Was C$146.05 Save 8%
View
ZINC SHIMS 3.5x6.25x1.5 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3.5", Degree - 1.5, Length - 6.25"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$239.00Was C$260.51 Save 8%
View
ZINC SHIMS 4x6.5x3.5 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 4", Degree - 3.5, Length - 6.5"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$379.00Was C$413.11 Save 8%
View
.06 deg. Camber/Toe SHIM for Nissan and Toyota
  • Full contact rear shims will correct camber and/or toe
  • 1 shim per wheel/per angle changed
  • Camber/Toe Change: .06 degrees
In Manufacturer stock, Ships Nov 25
C$34.99Was C$38.14 Save 8%
View
.10 deg. NYLON TOE SHIM for 12 vehicles
  • Rear Adjustment Range: Toe ±.10° (.05” / 1/16”)
  • Quickly change Toe on beam type axles
  • Required: 1 per wheel
In Manufacturer stock, Ships Nov 25
C$35.99Was C$39.23 Save 8%
View
AL SHIMS 3X6X1.5 deg.(6)
  • Width - 3", Degree - 1.5, Length - 6"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 25
C$126.99Was C$138.42 Save 8%
View
BREAK AWAY AXLE SHIMS(6) for Jeep
  • Box of (x6) Shims
  • 6 shims per box
  • Width: 1-3/4"
In Manufacturer stock, Ships Nov 25
C$189.99Was C$207.09 Save 8%
View
BREAK AWAY AXLE SHIMS(6) for Jeep
  • Box of (x6) Shims
  • 6 shims per box
  • Width: 1-3/4"
In Manufacturer stock, Ships Nov 25
C$192.99Was C$210.36 Save 8%
View
CAS ADJ CAMS 2WD for Ford and Mazda
  • Front Adjustment Range: Caster ±2.00°
  • Provides adjustment for front caster
  • Required: 1 per wheel
In Manufacturer stock, Ships Nov 25
C$94.99Was C$103.54 Save 8%
View
Caster/Camber Shims 1/16 (50)
  • Shim thickness: 1/16"
  • Box of (x50) Shims
  • 1-1/2 x 2-7/16
In Manufacturer stock, Ships Nov 25
C$133.99Was C$146.05 Save 8%
View
Cross Shaft: 6 11/16in. Center
  • Excellent strength-to-weight ratio
  • Shaft Hole Spacing: 6-11/16"
  • 4130 Chrome Moly
In Manufacturer stock, Ships Nov 25
C$249.00Was C$271.41 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$259.00Was C$282.31 Save 8%
View
Freightliner Shim 1/16in. (6)
  • 1/16" (1.5875mm) Thickness
  • Box of (x6) Shims
  • 1-9/16" x 3-3/4"
In Manufacturer stock, Ships Nov 25
C$42.99Was C$46.86 Save 8%
View
Freightliner Shim 1/32in. (6)
  • 1/32" (0.79375mm) Thickness
  • Box of (x6) Shims
  • 1-9/16" x 3-3/4"
In Manufacturer stock, Ships Nov 25
C$39.99Was C$43.59 Save 8%
View
L RND RECVR 7/8-14
  • 4140 N Chromoly Steel and Grade 8 Bolt
  • Left Hand thread rod end receiver
  • Welds into stock tubing sizes
In Manufacturer stock, Ships Nov 25
C$259.00Was C$282.31 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$56.99Was C$62.12 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$53.99Was C$58.85 Save 8%
View
REPLACEMENT BLADES (2)
  • Two high grade carbon steel replacement blades
  • Provides a straight, even, clean cut
  • 2 per package
In Manufacturer stock, Ships Nov 25
C$40.99Was C$44.68 Save 8%
View
R RND RECVR 5/8-18
  • 4140 N Chromoly Steel and Grade 8 Bolt
  • Right Hand thread rod end receiver
  • Welds into stock tubing sizes
In Manufacturer stock, Ships Nov 25
C$229.00Was C$249.61 Save 8%
View
R SQR RECVR 1/2-20
  • 4140 N Chromoly Steel and Grade 8 Bolt
  • Right Hand thread rod end receiver
  • Welds into stock tubing sizes
In Manufacturer stock, Ships Nov 25
C$289.00Was C$315.01 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$229.00Was C$249.61 Save 8%
View
Weld-In Ring Kit 2.25 in. ID
  • Designed with optimal press fit for the xAxis
  • Use with SPC xAxis sealed flex joint
  • Includes two snap rings
In Manufacturer stock, Ships Nov 25
C$48.99Was C$53.40 Save 8%
View
xAxis Sealed Flex Joint
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 25
C$93.99Was C$102.45 Save 8%
View
xAxis Sealed Flex Joint
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 25
C$92.99Was C$101.36 Save 8%
View
xAxis Sealed Flex Joint
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 25
C$94.99Was C$103.54 Save 8%
View
xAxis Sealed Flex Joint for 1999-2004 Ford Mustang Cobra
  • Replaces IRS Mustang Cobra with xAxis(TM) joints from SPC
  • Sealed joint retains grease and repels contaminants
  • Contains 1 per pack (4 needed for vehicle)
In Manufacturer stock, Ships Nov 25
C$144.99Was C$158.04 Save 8%
View
ZINC SHIMS 2.5x5x1.0 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 2.5", Degree - 1.0, Length - 5"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$138.99Was C$151.50 Save 8%
View
ZINC SHIMS 2.5x5x2.0 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 2.5", Degree - 2.0, Length - 5"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$192.99Was C$210.36 Save 8%
View
ZINC SHIMS 3.5x6.25x1.0 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3.5", Degree - 1.0, Length - 6.25"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$219.00Was C$238.71 Save 8%
View
ZINC SHIMS 3 x 6 x 1.5 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3", Degree - 1.5, Length - 6"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$219.00Was C$238.71 Save 8%
View
ZINC SHIMS 3 x 6 x 3.0 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3", Degree - 3.0, Length - 6"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$269.00Was C$293.21 Save 8%
View
ZINC SHIMS 3 x 6 x 4.0 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3", Degree - 4.0, Length - 6"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$299.00Was C$325.91 Save 8%
View
12/13+ Dodge Hex Tie Rod Adjuster for 2013-2025 Ram 2500 and 3500
  • Recommended when the existing sleeve has been damaged or adjustments are needed
  • Fully djustable hex shaped sleeves replace the round tie rod sleeve
  • Assures ease of adjustment without slippage
In Manufacturer stock, Ships Nov 25
C$209.00Was C$227.81 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$50.99Was C$55.58 Save 8%
View
1/64in. DUO FIT SHIM (25)
  • Zinc coated for superior corrosion resistance
  • Fits openings from 7/16" to 1/2"
  • 1/64" Shim thickness
In Manufacturer stock, Ships Nov 25
C$36.99Was C$40.32 Save 8%
View
1 deg. NYLON CAMBER SHIM for 12 vehicles
  • Rear Adjustment Range: Toe ±1.00°
  • Rear Adjustment Range: Toe ±1.00˚
  • Required: 1 per wheel
In Manufacturer stock, Ships Nov 25
C$35.99Was C$39.23 Save 8%
View
2-1/4 deg. Camber/Caster Sleeve for Ford
  • Clear Zinc coating for corrosion resistance
  • Recommended Tools: 77880 - Sleeve Puller
  • Required: 1 per wheel
In Manufacturer stock, Ships Nov 25
C$53.99Was C$58.85 Save 8%
View
.38 deg. Camber/Toe SHIM for Nissan and Toyota
  • Full contact rear shims will correct camber and/or toe
  • 1 shim per wheel/per angle changed
  • Camber/Toe Change: .38 degrees
In Manufacturer stock, Ships Nov 25
C$34.99Was C$38.14 Save 8%
View
.5 deg. Camber Shim for Ford and Mercury
  • Rear Adjustment Range: Camber ±0.50°
  • Includes Brake Caliper Shim
  • Required: 1 per wheel Only!
In Manufacturer stock, Ships Nov 25
C$37.99Was C$41.41 Save 8%
View
.75 deg. Camber Shim for Ford and Mercury
  • Rear Adjustment Range: Camber ±0.75°
  • Includes Brake Caliper Shim
  • Required: 1 per wheel Only!
In Manufacturer stock, Ships Nov 25
C$37.99Was C$41.41 Save 8%
View
996/997 981/987 Rear Performance Kit 6-arm set for Porsche
  • Control the suspension setting on your track ready Porsche with this 6-arm set
  • Will not work on rear of Xenon equipped headlamp models
  • Adds extra strength vs the OE arm
In Manufacturer stock, Ships Nov 25
C$2,949.00Was C$3,214.41 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$1,769.00Was C$1,928.21 Save 8%
View
AL SHIMS 3.5X6.25X1 deg.(6)
  • Width - 3.5", Degree - 1.0, Length - 6.25"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 25
C$126.99Was C$138.42 Save 8%
View
AL Shims 3.5X6.25X2.5 deg.(6)
  • Width - 3.5", Degree - 2.5, Length - 6.25"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 25
C$145.99Was C$159.13 Save 8%
View
AL SHIMS 3.5X6.25X2 deg.(6)
  • Width - 3.5", Degree - 2.0, Length - 6.25"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 25
C$141.99Was C$154.77 Save 8%
View
AL SHIMS 3.5X6.25X4 deg.(6)
  • Width - 3.5", Degree - 4.0, Length - 6.25"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 25
C$197.99Was C$215.81 Save 8%
View
CARBIDE INSERT-ACCUTURN
  • Three cutting edges for long life
  • Replaces OEM #433795
  • 5 bits per pack
In Manufacturer stock, Ships Nov 25
C$77.99Was C$85.01 Save 8%
View
Caster/Camber Shims 1/32 (50)
  • Zinc plated for superior corrosion resistance
  • Caster and Camber adjustment shim
  • 1/2" opening fits most imports
In Manufacturer stock, Ships Nov 25
C$85.99Was C$93.73 Save 8%
View
Caster/Camber Shims 1/32 (50)
  • Shim thickness: 1/32"
  • Box of (x50) Shims
  • 1-1/2 x 2-7/16
In Manufacturer stock, Ships Nov 25
C$102.99Was C$112.26 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$60.99Was C$66.48 Save 8%
View
DATSUN CAMBER KIT for BMW and Nissan
  • Adjust camber 0.75 by removing lower control arm attaching bolt and enlarging hole
  • Ensure bolt is long enough before cutting
  • Enlarge hole using SPC 73010 punch
In Manufacturer stock, Ships Nov 25
C$199.00Was C$216.91 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$209.00Was C$227.81 Save 8%
View