Trade prices for dealers.

0

SPC Performance parts

In stock
Replacement Bushing (spc67660)
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 25
C$102.99Was C$112.26 Save 8%
View
R RND REC 7/8-14
  • 4140 N Chromoly Steel and Grade 8 Bolt
  • Left Hand thread rod end receiver
  • Welds into stock tubing sizes
In Manufacturer stock, Ships Nov 25
C$259.00Was C$282.31 Save 8%
View
Steel Shim 4X6.5X1.5 - Pack of 6
  • Spring width - 4", Pad Length - 6.5", 1.5 Degree change
  • Top of the line steel construction
  • Maximum compression strength
In Manufacturer stock, Ships Nov 25
C$609.00Was C$663.81 Save 8%
View
Weld-In Ring Kit 1.75 in. ID
  • Designed with optimal press fit for the xAxis
  • Use with SPC xAxis sealed flex joint
  • Includes two snap rings
In Manufacturer stock, Ships Nov 25
C$46.99Was C$51.22 Save 8%
View
xAxis Balljoint
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 25
C$114.99Was C$125.34 Save 8%
View
xAxis Jeep TJ FUCA
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 25
C$101.99Was C$111.17 Save 8%
View
ZINC SHIMS 4x6.5x5.0 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 4", Degree - 5.0, Length - 6.5"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$459.00Was C$500.31 Save 8%
View
Adj. Rear Arm for 2003-2006 Hyundai Santa Fe
  • Obtain 3.5 of camber and 1.5 of toe on the rear of the Hyundai Santa
  • Rear Upper Control arms provide added camber and toe adjustment
  • Dial in alignment for improved tire wear and drivability
In Manufacturer stock, Ships Nov 25
C$429.00Was C$467.61 Save 8%
View
AL SHIMS 2.5X5X1.5 deg. (6)
  • Width - 2.5", Degree - 1.5, Length - 5"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 25
C$116.99Was C$127.52 Save 8%
View
AL SHIMS 2.5X5X2.5 deg.(6)
  • Width - 2.5", Degree - 2.5, Length - 5"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 25
C$121.99Was C$132.97 Save 8%
View
AL SHIMS 3.5X6.25X3 deg.(6)
  • Width - 3.5", Degree - 3.0, Length - 6.25"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 25
C$185.99Was C$202.73 Save 8%
View
AL SHIMS 3X6X2.5 deg.(6)
  • Width - 3", Degree - 2.5, Length - 6"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 25
C$134.99Was C$147.14 Save 8%
View
AL SHIMS 3X6X3 deg.(6)
  • Width - 3", Degree - 3.0, Length - 6"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 25
C$141.99Was C$154.77 Save 8%
View
AL SHIMS 4X6.5X3 deg.(6)
  • Width - 4", Degree - 3.0, Length - 6.5"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 25
C$198.99Was C$216.90 Save 8%
View
AMMCO TOOL HOLDER ASSY
  • Fits Hoffman model 660
  • LEFT HAND TOOL HOLDER
  • 3/8" Square Shank
In Manufacturer stock, Ships Nov 25
C$84.99Was C$92.64 Save 8%
View
Caster/Camber Shims 1/32 (50)
  • Shim thickness: 1/32"
  • Box of (x50) Shims
  • 1-1/8" x 1-1/8"
In Manufacturer stock, Ships Nov 25
C$64.99Was C$70.84 Save 8%
View
Caster/Camber Shims 1/8 (50)
  • Zinc plated for superior corrosion resistance
  • Caster and Camber adjustment shim
  • 1/2" opening fits most imports
In Manufacturer stock, Ships Nov 25
C$115.99Was C$126.43 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$63.99Was C$69.75 Save 8%
View
E39 Rear Upper Control Arm Bushing Kit for BMW
  • Adjusts camber plus or minus 1.25 degrees
  • Includes mounting cam hardware
  • Requires one kit per wheel
In Manufacturer stock, Ships Nov 25
C$319.00Was C$347.71 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$27.99Was C$30.51 Save 8%
View
Front Lower Control Arm for Jeep
  • Dual-threaded adjuster and jam nut makes caster/pinion angle adjustments quick and easy
  • Adds strength and articulation flexibility to your stock-height or lifted' Wrangler.
  • xAxis sealed flex joint for bind free articulation
In Manufacturer stock, Ships Nov 25
C$429.00Was C$467.61 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$469.00Was C$511.21 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$239.00Was C$260.51 Save 8%
View
L RND RECVR 1 1/4-12
  • 4140 N Chromoly Steel and Grade 8 Bolt
  • Left Hand thread rod end receiver
  • Welds into stock tubing sizes
In Manufacturer stock, Ships Nov 25
C$309.00Was C$336.81 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$52.99Was C$57.76 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$49.99Was C$54.49 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$64.99Was C$70.84 Save 8%
View
RECVNG TUBE 2.625ID
  • Black oxide coated for long service life
  • Receiving tube - 2.87OD x 2.62ID
  • Sold each
In Manufacturer stock, Ships Nov 25
C$96.99Was C$105.72 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$52.99Was C$57.76 Save 8%
View
Upper Control Arm Front Left for Audi and Porsche
  • Adjusts camber and caster plus or minus 1.5 degrees
  • Kit includes both arms for the LEFT side only
  • Comes with pinch bolt hardware
In Manufacturer stock, Ships Nov 25
C$739.00Was C$805.51 Save 8%
View
ZINC SHIMS 2.5x5x3.5 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 2.5", Degree - 3.5, Length - 5"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$229.00Was C$249.61 Save 8%
View
ZINC SHIMS 3 x 6 x 0.5 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3", Degree - 0.5, Length - 6"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$190.99Was C$208.18 Save 8%
View
1-1/4 deg. Camber/Caster Sleeve for Ford
  • Clear Zinc coating for corrosion resistance
  • Recommended Tools: 77880 - Sleeve Puller
  • Required: 1 per wheel
In Manufacturer stock, Ships Nov 25
C$53.99Was C$58.85 Save 8%
View
1/32in. DUO FIT SHIM (25)
  • Zinc coated for superior corrosion resistance
  • Fits openings from 7/16" to 1/2"
  • 1/32" Shim thickness
In Manufacturer stock, Ships Nov 25
C$54.99Was C$59.94 Save 8%
View
1/8in. DUO FIT SHIM (25)
  • Zinc coated for superior corrosion resistance
  • Fits openings from 9/16" to 5/8"
  • 1/8" Shim thickness
In Manufacturer stock, Ships Nov 25
C$58.99Was C$64.30 Save 8%
View
.30 deg. NYLON TOE SHIM for 12 vehicles
  • Rear Adjustment Range: Toe ±.30° (.15” / 5/32”)
  • Quickly change Toe on beam type axles
  • Required: 1 per wheel
In Manufacturer stock, Ships Nov 25
C$35.99Was C$39.23 Save 8%
View
3.5 in. HD Support Plate (6)
  • Box of (x6) Shims
  • 1/8" thickness
  • 6 per pack
In Manufacturer stock, Ships Nov 25
C$349.00Was C$380.41 Save 8%
View
.50 deg. NYLON CAMBER SHIM for 12 vehicles
  • Rear Adjustment Range: Toe ±.50°
  • Rear Adjustment Range: Toe ±.50˚
  • Required: 1 per wheel
In Manufacturer stock, Ships Nov 25
C$35.99Was C$39.23 Save 8%
View
.80 deg. NYLON TOE SHIM for 12 vehicles
  • Rear Adjustment Range: Toe ±.80° (.40” / 3/8”)
  • Quickly change Toe on beam type axles
  • Required: 1 per wheel
In Manufacturer stock, Ships Nov 25
C$35.99Was C$39.23 Save 8%
View
AL SHIMS 3X6X3.5 deg.(6)
  • Width - 3", Degree - 3.5, Length - 6"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 25
C$145.99Was C$159.13 Save 8%
View
B9 Upper Control Arm Front Left for Audi
  • Adjusts camber and caster plus or minus 1.5 degrees
  • Kit includes both arms for the LEFT side only
  • Comes with pinch bolt hardware
In Manufacturer stock, Ships Nov 25
C$739.00Was C$805.51 Save 8%
View
BREAK AWAY AXLE SHIMS(6) for Jeep
  • Box of (x6) Shims
  • 6 shims per box
  • Width: 1-3/4"
In Manufacturer stock, Ships Nov 25
C$191.99Was C$209.27 Save 8%
View
CAST SHIM 1/32in. (6) for Jeep
  • Stackable for larger changes
  • Shim thickness: 1/32"
  • Pack of 6
In Manufacturer stock, Ships Nov 25
C$48.99Was C$53.40 Save 8%
View
Kenworth Shim 3/4 (6)
  • Tandem Alignment shims for all your HD needs
  • Included in SPC #36000 Shim assortment
  • Kenworth Airglide space 3/4
In Manufacturer stock, Ships Nov 25
C$136.99Was C$149.32 Save 8%
View
L RD RECVR 7/8-14
  • 4140 N Chromoly Steel and Grade 8 Bolt
  • Left Hand thread rod end receiver
  • Welds into stock tubing sizes
In Manufacturer stock, Ships Nov 25
C$259.00Was C$282.31 Save 8%
View
MBZ SHIMS 4X6.5X0.5 deg.(6)
  • Manganese Bronze construction provides top compression strength and hardness
  • Width - 4", Degree - 0.5°, Length - 6.5"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$769.00Was C$838.21 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$47.99Was C$52.31 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$81.99Was C$89.37 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$43.99Was C$47.95 Save 8%
View
R RND RECVR 1 1/4-12
  • 4140 N Chromoly Steel and Grade 8 Bolt
  • Right Hand thread rod end receiver
  • Welds into stock tubing sizes
In Manufacturer stock, Ships Nov 25
C$279.00Was C$304.11 Save 8%
View
R RND RECVR 7/8-14
  • 4140 N Chromoly Steel and Grade 8 Bolt
  • Right Hand thread rod end receiver
  • Welds into stock tubing sizes
In Manufacturer stock, Ships Nov 25
C$279.00Was C$304.11 Save 8%
View
R SQR REC 1 1/4-12
  • 4140 N Chromoly Steel and Grade 8 Bolt
  • Right Hand thread rod end receiver
  • Welds into stock tubing sizes
In Manufacturer stock, Ships Nov 25
C$279.00Was C$304.11 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$40.99Was C$44.68 Save 8%
View
Weld-In Ring Kit 1.81 in. ID
  • Designed with optimal press fit for the xAxis
  • Use with SPC xAxis sealed flex joint
  • Includes two snap rings
In Manufacturer stock, Ships Nov 25
C$46.99Was C$51.22 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$51.99Was C$56.67 Save 8%
View
ZINC SHIMS 3.5x6.25x0.5 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3.5", Degree - 0.5, Length - 6.25"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$209.00Was C$227.81 Save 8%
View
ZINC SHIMS 3.5x6.25x3.0 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3.5", Degree - 3.0, Length - 6.25"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$309.00Was C$336.81 Save 8%
View
ZINC SHIMS 3 x 6 x 2.0 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3", Degree - 2.0, Length - 6"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$239.00Was C$260.51 Save 8%
View
1.0 deg. Camber Shim for Ford and Mercury
  • Rear Adjustment Range: Camber ±1.00°
  • Includes Brake Caliper Shim
  • Required: 1 per wheel Only!
In Manufacturer stock, Ships Nov 25
C$37.99Was C$41.41 Save 8%
View
1-1/2in. SOCKET 12 PT. for Ford and Mazda
  • Plated and polished surface for long service life
  • Works with pinch bolt style suspensions
  • 1/2" Drive 12-pt 1-1/2" socket
In Manufacturer stock, Ships Nov 25
C$90.99Was C$99.18 Save 8%
View
1/32in. DUO FIT SHIM (25)
  • Zinc coated for superior corrosion resistance
  • Fits openings from 9/16" to 5/8"
  • 1/32" Shim thickness
In Manufacturer stock, Ships Nov 25
C$48.99Was C$53.40 Save 8%
View
.50 deg. Camber/Toe SHIM for Nissan and Toyota
  • Full contact rear shims will correct camber and/or toe
  • 1 shim per wheel/per angle changed
  • Camber/Toe Change: .50 degrees
In Manufacturer stock, Ships Nov 25
C$34.99Was C$38.14 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$549.00Was C$598.41 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$459.00Was C$500.31 Save 8%
View
AL Shims 2.5X5X0.5 deg. (6)
  • Width - 2.5", Degree - 0.5, Length - 5"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 25
C$111.99Was C$122.07 Save 8%
View
AL SHIMS 2.5X5X2 deg. (6)
  • Width - 2.5", Degree - 2.0, Length - 5"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 25
C$117.99Was C$128.61 Save 8%
View
AL SHIMS 2.5X5 X 3 deg.(6)
  • Width - 2.5", Degree - 3.0, Length - 5"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 25
C$123.99Was C$135.15 Save 8%
View
AL SHIMS 2.5X5X4 deg. (6)
  • Width - 2.5", Degree - 4.0, Length - 5"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 25
C$128.99Was C$140.60 Save 8%
View
AL Shims 3.5X6.25X0.5 deg.(6)
  • Width - 3.5", Degree - 0.5, Length - 6.25"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 25
C$122.99Was C$134.06 Save 8%
View
AL Shims 3.5X6.25X1.5 deg.(6)
  • Width - 3.5", Degree - 1.5, Length - 6.25"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 25
C$136.99Was C$149.32 Save 8%
View
AL SHIS 3.5X6.25X3.5 deg.(6)
  • Width - 3.5", Degree - 3.5, Length - 6.25"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 25
C$192.99Was C$210.36 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$146.99Was C$160.22 Save 8%
View
CAMBER ADJUSTMENT KIT for 13 vehicles
  • Provides up to 2-1/2 front camber change
  • Coated for best corrosion protection
  • One kit services full axle
In Manufacturer stock, Ships Nov 25
C$68.99Was C$75.20 Save 8%
View
Caster/Camber Shims 3/16 (50)
  • Zinc plated for superior corrosion resistance
  • Caster and Camber adjustment shim
  • 1/2" opening fits most imports
In Manufacturer stock, Ships Nov 25
C$50.99Was C$55.58 Save 8%
View
EZ ON HD INT SLEEVES (6)
  • Threadless sleeve design allows quick & easy centering - a true time saver
  • Dimensions: 1.25" hole/.25" to .3125 depth
  • Comes in pack of 6 (6/pkg)
In Manufacturer stock, Ships Nov 25
C$139.99Was C$152.59 Save 8%
View
EZ ON HD INT SLEEVES (6)
  • Threadless sleeve design allows quick & easy centering - a true time saver
  • Dimensions: 1.00" hole /.5" depth
  • Comes in pack of 6 (6/pkg)
In Manufacturer stock, Ships Nov 25
C$139.99Was C$152.59 Save 8%
View