Trade prices for dealers.

0

SPC Performance parts

In stock
1 deg. SPRINTER VAN SHIM (2) for Dodge and Freightliner
  • Shim kits let you change front camber on Dodge, Freightliner and Mercedes Sprinter Vans
  • Unique design allows the technician to lock' the alignment settings
  • Camber -1.0 (fixed)
In Manufacturer stock, Ships Nov 25
C$52.99Was C$57.76 Save 8%
View
AL SHIMS 3X6 X 2 deg.(6)
  • Width - 3", Degree - 2.0, Length - 6"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 25
C$132.99Was C$144.96 Save 8%
View
AL SHIMS 4X6.5X2.5 deg.(6)
  • Width - 4", Degree - 2.5, Length - 6.5"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 25
C$192.99Was C$210.36 Save 8%
View
AL SHIMS 4X6.5X5 deg.(6)
  • Width - 4", Degree - 5.0, Length - 6.5"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 25
C$229.00Was C$249.61 Save 8%
View
Control Arm Hardware Kit
  • Superior corrosion resistant finish
  • Clevite bushing for NVH reduction
  • Requires one kit per wheel
In Manufacturer stock, Ships Nov 25
C$409.00Was C$445.81 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$63.99Was C$69.75 Save 8%
View
Kenworth Shim 1/32 (6)
  • Tandem Alignment shims for all your HD needs
  • Included in SPC #36000 Shim assortment
  • Kenworth Airglide space 1/32
In Manufacturer stock, Ships Nov 25
C$47.99Was C$52.31 Save 8%
View
Rear Toe Cam Kit for Mazda and Tesla
  • Superior corrosion resistant finish
  • Factory cam direct replacement
  • Requires one per wheel
In Manufacturer stock, Ships Nov 25
C$53.99Was C$58.85 Save 8%
View
Rear Toe Cam Kit for Nissan and Toyota
  • Designed to replace worn or corroded OE bolts
  • Easily Adjustable on the vehicle
  • Limited Lifetime Warranty
In Manufacturer stock, Ships Nov 25
C$49.99Was C$54.49 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$44.99Was C$49.04 Save 8%
View
Sante Fe Adj. Cams (Pr) for 2001-2006 Hyundai Santa Fe
  • Doubles the adjustment range of factory cams on Hyundai Sante Fe models
  • Dial in alignment for improved tire wear and drivability
  • Use SPC rotary file #85130 to extend the factory slots
In Manufacturer stock, Ships Nov 25
C$147.99Was C$161.31 Save 8%
View
Steel Shim 4X6.5X2.5 - Pack of 6
  • Spring width - 4", Pad Length - 6.5", 2.5Degree change
  • Top of the line steel construction
  • Maximum compression strength
In Manufacturer stock, Ships Nov 25
C$659.00Was C$718.31 Save 8%
View
xAxis Sealed Flex Joint LH 3/4in-16x12mm BH x 2in W
  • Forged steel alloy receivers with xAxis sealed flex joints
  • Sealed dust boots, moly grease and polished nickel ball
  • Rod end thread: LH 3/4"-16 X 12MM BH X 2" W
In Manufacturer stock, Ships Nov 25
C$209.00Was C$227.81 Save 8%
View
2-1/2 deg. Camber/Caster Sleeve for Ford
  • Clear Zinc coating for corrosion resistance
  • Recommended Tools: 77880 - Sleeve Puller
  • Required: 1 per wheel
In Manufacturer stock, Ships Nov 25
C$53.99Was C$58.85 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$1,309.00Was C$1,426.81 Save 8%
View
Caster/Camber Shims 1/32 (50)
  • 1/32" Shim thickness
  • Box of (x50) Shims
  • 1-1/16" x 1-3/16"
In Manufacturer stock, Ships Nov 25
C$57.99Was C$63.21 Save 8%
View
Caster/Camber Shims 1/8 (50)
  • Shim thickness: 1/8"
  • Box of (x50) Shims
  • 1-1/2 x 2-7/16
In Manufacturer stock, Ships Nov 25
C$187.99Was C$204.91 Save 8%
View
GM Rear Camber Bolt for Chevrolet and Buick
  • Coated for best corrosion protection
  • Provides 2.0 camber adjustment
  • Requires one per side
In Manufacturer stock, Ships Nov 25
C$45.99Was C$50.13 Save 8%
View
Kenworth Shim 1/4 (6)
  • Tandem Alignment shims for all your HD needs
  • Included in SPC #36000 Shim assortment
  • Kenworth Airglide space 1/4
In Manufacturer stock, Ships Nov 25
C$86.99Was C$94.82 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$57.99Was C$63.21 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$110.99Was C$120.98 Save 8%
View
Rear Adjustable Camber Arms for Mini
  • Billet aluminum contruction provides lightweight strength
  • Adjusts camber plus or minus 4.0 degrees
  • Required one kit per vehicle
In Manufacturer stock, Ships Nov 25
C$1,159.00Was C$1,263.31 Save 8%
View
1/8in. DUO FIT SHIM (25)
  • Zinc coated for superior corrosion resistance
  • Fits openings from 7/16" to 1/2"
  • 1/8" Shim thickness
In Manufacturer stock, Ships Nov 25
C$98.99Was C$107.90 Save 8%
View
.75 deg. NYLON CAMBER SHIM for 12 vehicles
  • Rear Adjustment Range: Toe ±.75°
  • Rear Adjustment Range: Toe ±.75˚
  • Required: 1 per wheel
In Manufacturer stock, Ships Nov 25
C$35.99Was C$39.23 Save 8%
View
AL SHIMS 4X6.5X3.5 deg.(6)
  • Width - 4", Degree - 3.5, Length - 6.5"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 25
C$209.00Was C$227.81 Save 8%
View
AL SHIMS 4X6.5X4 deg.(6)
  • Width - 4", Degree - 4.0, Length - 6.5"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 25
C$209.00Was C$227.81 Save 8%
View
BREAK AWAY AXLE SHIMS(6) for Jeep
  • Box of (x6) Shims
  • 6 shims per box
  • Width: 1-3/4"
In Manufacturer stock, Ships Nov 25
C$219.00Was C$238.71 Save 8%
View
CASTER ADJ BOLT for 2005-2014 Ford Mustang
  • Replaces one of the two factory bolts on reward pivot of lower control arm bushing bracket
  • Use rotary file to elongate factory holes
  • Restores lost adjustment
In Manufacturer stock, Ships Nov 25
C$44.99Was C$49.04 Save 8%
View
Caster/Camber Shims 1/16 (50)
  • "N" Style Universal 1/2" slot shim
  • Shim thickness: 1/16"
  • Comes in a pack of 50
In Manufacturer stock, Ships Nov 25
C$82.99Was C$90.46 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$91.99Was C$100.27 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$91.99Was C$100.27 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$239.00Was C$260.51 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$36.99Was C$40.32 Save 8%
View
JK Hex Tie Rod for 2007-2018 Jeep Wrangler and Wrangler JK
  • Recommended when the existing sleeve has been damaged or adjustments are needed
  • Fully djustable hex shaped sleeves replace the round tie rod sleeve
  • Assures ease of adjustment without slippage
In Manufacturer stock, Ships Nov 25
C$127.99Was C$139.51 Save 8%
View
MBZ SHIMS 4X6.5X1.5 deg.(6)
  • Manganese Bronze construction provides top compression strength and hardness
  • Width - 4", Degree - 1.5°, Length - 6.5"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$839.00Was C$914.51 Save 8%
View
MBZ SHIMS 4X6.5X1 deg.(6)
  • Manganese Bronze construction provides top compression strength and hardness
  • Width - 4", Degree - 1.0°, Length - 6.5"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$799.00Was C$870.91 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$1,179.00Was C$1,285.11 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$349.00Was C$380.41 Save 8%
View
xAxis Dodge/Jeep Rear
  • Up to 45 degree angularity for all alignment requirements
  • Sealed joint retains grease and repels contaminants
  • Easier to install vs rubber and poly bushings
In Manufacturer stock, Ships Nov 25
C$104.99Was C$114.44 Save 8%
View
0 Deg. Camber Sleeve for Jeep
  • Front Adjustment Range: Camber +0.00°
  • Front Adjustment Range: Camber +0.00˚
  • Required: 1 per wheel
In Manufacturer stock, Ships Nov 25
C$86.99Was C$94.82 Save 8%
View
1/16in. DUO FIT SHIM (25)
  • Zinc coated for superior corrosion resistance
  • Fits openings from 7/16" to 1/2"
  • 1/16" Shim thickness
In Manufacturer stock, Ships Nov 25
C$73.99Was C$80.65 Save 8%
View
1-3/4 deg. Camber/Caster Sleeve for Ford
  • Clear Zinc coating for corrosion resistance
  • Recommended Tools: 77880 - Sleeve Puller
  • Required: 1 per wheel
In Manufacturer stock, Ships Nov 25
C$53.99Was C$58.85 Save 8%
View
1/4 deg. Camber/Caster Sleeve for Ford
  • Clear Zinc coating for corrosion resistance
  • Recommended Tools: 77880 - Sleeve Puller
  • Required: 1 per wheel
In Manufacturer stock, Ships Nov 25
C$53.99Was C$58.85 Save 8%
View
.20 deg. NYLON TOE SHIM for 12 vehicles
  • Rear Adjustment Range: Toe ±.20° (.10” / 1/8”)
  • Quickly change Toe on beam type axles
  • Required: 1 per wheel
In Manufacturer stock, Ships Nov 25
C$35.99Was C$39.23 Save 8%
View
.25 deg. NYLON CAMBER SHIM for 12 vehicles
  • Rear Adjustment Range: Toe ±.25°
  • Rear Adjustment Range: Toe ±.25˚
  • Required: 1 per wheel
In Manufacturer stock, Ships Nov 25
C$35.99Was C$39.23 Save 8%
View
AL SHIMS 2.5X5X3.5 deg.(6)
  • Width - 2.5", Degree - 3.5, Length - 5"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 25
C$127.99Was C$139.51 Save 8%
View
AMMCO TOOL HOLDER ASSY
  • RIGHT HAND TOOL HOLDER
  • Fits Hoffman model 660
  • 3/8" Square Shank
In Manufacturer stock, Ships Nov 25
C$84.99Was C$92.64 Save 8%
View
BAND 1/4 X 3/8 X 6.5
  • Black rubber gasket-type silencer band
  • Perfect for use with solid rotors
  • For use with solid rotors
In Manufacturer stock, Ships Nov 25
C$37.99Was C$41.41 Save 8%
View
EZ ON HD INT SLEEVES (6)
  • Dimensions: 1.28" hole /.5" depth
  • Comes in pack of 6 (6/pkg)
  • For Aluminum Wheels
In Manufacturer stock, Ships Nov 25
C$149.99Was C$163.49 Save 8%
View
Front Right Adjustable Upper Control Arm for Jeep
  • Dual-threaded adjuster and jam nut makes caster/pinion angle adjustments quick and easy
  • Adds strength and articulation flexibility to your stock-height or lifted' Wrangler.
  • xAxis sealed flex joint for bind free articulation
In Manufacturer stock, Ships Nov 25
C$359.00Was C$391.31 Save 8%
View
GM HiPer Strut Bolt Kit for Buick, Cadillac and Saab
  • Replace GM torque-to-yield bolts when alignment service is needed
  • Upgraded 12.9 bolts from OE 10.9 TTY bolts
  • Requires one per side
In Manufacturer stock, Ships Nov 25
C$60.99Was C$66.48 Save 8%
View
M10 X 1.5 X 40 (8) for Volkswagen and Audi
  • 6mm metric hexagon socket button head cap
  • To be used with rear shims when needed
  • Limited lifetime warranty.
In Manufacturer stock, Ships Nov 25
C$34.99Was C$38.14 Save 8%
View
MBZ SHIMS 4X6.5X2.5 deg.(6)
  • Manganese Bronze construction provides top compression strength and hardness
  • Width - 4", Degree - 2.5°, Length - 6.5"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$929.00Was C$1,012.61 Save 8%
View
MBZ SHIMS 4X6.5X3 deg.(6)
  • Manganese Bronze construction provides top compression strength and hardness
  • Width - 4", Degree - 3.0°, Length - 6.5"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$969.00Was C$1,056.21 Save 8%
View
Steel Shim 4X6.5X3 - Pack of 6
  • Spring width - 4", Pad Length - 6.5", 3.0 Degree change
  • Top of the line steel construction
  • Maximum compression strength
In Manufacturer stock, Ships Nov 25
C$709.00Was C$772.81 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$229.00Was C$249.61 Save 8%
View
ZINC SHIMS 3 x 6 x 1.0 deg
  • Zinc Alloy provides superior performance over aluminum
  • Width - 3", Degree - 1.0, Length - 6"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$198.99Was C$216.90 Save 8%
View
1-1/4 deg. SLEEVE for 7 vehicles
  • Front Adjustment Range: Camber/Caster ±1.25°
  • Front Adjustment Range: Camber/Caster ±1.25˚
  • Required: 1 per wheel
In Manufacturer stock, Ships Nov 25
C$72.99Was C$79.56 Save 8%
View
1/16in. DUO FIT SHIM (25)
  • Zinc coated for superior corrosion resistance
  • Fits openings from 9/16" to 5/8"
  • 1/16" Shim thickness
In Manufacturer stock, Ships Nov 25
C$42.99Was C$46.86 Save 8%
View
3/4 deg. Camber/Caster Sleeve for Ford
  • Clear Zinc coating for corrosion resistance
  • Recommended Tools: 77880 - Sleeve Puller
  • Required: 1 per wheel
In Manufacturer stock, Ships Nov 25
C$53.99Was C$58.85 Save 8%
View
3 in. HD Support Plate(6)
  • Box of (x6) Shims
  • 1/8" thickness
  • 6 per pack
In Manufacturer stock, Ships Nov 25
C$289.00Was C$315.01 Save 8%
View
4 in. HD Support Plate (6)
  • Box of (x6) Shims
  • 1/8" thickness
  • 6 per pack
In Manufacturer stock, Ships Nov 25
C$299.00Was C$325.91 Save 8%
View
AL SHIMS 3X6 X 1 deg.(6)
  • Width - 3", Degree - 1.0, Length - 6"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 25
C$121.99Was C$132.97 Save 8%
View
AL SHIMS 3X 6 X 4 deg.(6)
  • Width - 3", Degree - 4.0, Length - 6"
  • Over-the-road Heavy Duty Truck shims
  • Aluminum Alloy Truck Axle Shims
In Manufacturer stock, Ships Nov 25
C$149.99Was C$163.49 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$1,689.00Was C$1,841.01 Save 8%
View
Caster/Camber Shims 1/64 (50)
  • Zinc plated for superior corrosion resistance
  • Caster and Camber adjustment shim
  • 1/2" opening fits most imports
In Manufacturer stock, Ships Nov 25
C$37.99Was C$41.41 Save 8%
View
In Manufacturer stock, Ships Nov 25
C$117.99Was C$128.61 Save 8%
View
Early GM Metric B/Joint for 76 vehicles
  • Mounting hardware included
  • Requires one per wheel
  • Grease-able design
In Manufacturer stock, Ships Nov 25
C$196.99Was C$214.72 Save 8%
View
MBZ SHIMS 4X6.5X3.5 deg.(6)
  • Manganese Bronze construction provides top compression strength and hardness
  • Width - 4", Degree - 3.5°, Length - 6.5"
  • Over-the-road Heavy Duty Truck shims
In Manufacturer stock, Ships Nov 25
C$1,009.00Was C$1,099.81 Save 8%
View