Trade prices for dealers.

0

SPC Performance parts

In stock
Special Order, Ships Nov 25
C$98.99Was C$107.90 Save 8%
View
11/13 Dodge Hex Tie Rod Adjuster for 2013-2023 Ram 2500 and 3500
  • Recommended when the existing sleeve has been damaged or adjustments are needed
  • Fully djustable hex shaped sleeves replace the round tie rod sleeve
  • Assures ease of adjustment without slippage
Special Order, Ships Nov 25
C$209.00Was C$227.81 Save 8%
View
1/16in. THICK TUBE-40910
  • Fits SPC #40910 Upper Control Arm Bushing Service Set
  • 1/16" (1.5875mm) Thick Adaptor Tube
  • Used to remove Control Arm Bushings
Special Order, Ships Nov 25
C$35.99Was C$39.23 Save 8%
View
3/16in. THICK TUBE-40910
  • Fits SPC #40910 Upper Control Arm Bushing Service Set
  • 3/16" (4.7625mm) Thick Adaptor Tube
  • Used to remove Control Arm Bushings
Special Order, Ships Nov 25
C$39.99Was C$43.59 Save 8%
View
Special Order, Ships Nov 25
C$135.99Was C$148.23 Save 8%
View
Ball Joint for 22 vehicles
  • Stock height OE replacement
  • Requires one per wheel
  • Grease-able design
Special Order, Ships Nov 25
C$118.99Was C$129.70 Save 8%
View
Balljoint For 72270
  • Replacement joint for 72270 arms
  • Easy bolt on installation
  • Requires one per arm
Special Order, Ships Nov 25
C$279.00Was C$304.11 Save 8%
View
BJOINT INSTALL ADPTR SET for Jeep and Dodge
  • Sleeves are designed to match the angle of the yoke on the axle housing to insure proper installation
  • Use with our Dodge & Jeep Offset Ball Joints (part nos. 23510, 23520, 23530, 23540)
  • Use in conjuction with the SPC 72509 Ball Joint Press
Special Order, Ships Nov 25
C$184.99Was C$201.64 Save 8%
View
Special Order, Ships Nov 25
C$259.00Was C$282.31 Save 8%
View
LEFT HAND TOOL
  • Complete with one carbide Insert (No. 407)
  • LEFT HAND TOOL HOLDER
  • 3/8" Square Shank
Special Order, Ships Nov 25
C$94.99Was C$103.54 Save 8%
View
LONG FORCING SCREW
  • Can be used with SPC #40910 or #40920 kits
  • Removes difficult Toyota Cam Sleeves
  • Threaded rod fits #4434 C-Frame
Special Order, Ships Nov 25
C$116.99Was C$127.52 Save 8%
View
Lower Ball Joint for 22 vehicles
  • Mounting hardware included
  • Requires one per wheel
  • Grease-able design
Special Order, Ships Nov 25
C$130.99Was C$142.78 Save 8%
View
Special Order, Ships Nov 25
C$37.99Was C$41.41 Save 8%
View
RIGHT HAND TOOL
  • Complete with one carbide Insert (No. 407)
  • RIGHT HAND TOOL HOLDER
  • 3/8" Square Shank
Special Order, Ships Nov 25
C$94.99Was C$103.54 Save 8%
View
Special Order, Ships Nov 25
C$289.00Was C$315.01 Save 8%
View
ROUND BRG RECVR 1.0in.
  • Spherical Bearing receiver made of 4140 N Chromoly Steel
  • Bearing Race Width (B) 0.5050"
  • Bearing Diameter (A) 1.0000"
Special Order, Ships Nov 25
C$43.99Was C$47.95 Save 8%
View
ROUND BRG RECVR 1.1875in.
  • Spherical Bearing receiver made of 4140 N Chromoly Steel
  • Bearing Race Width (B) 0.5670"
  • Bearing Diameter (A) 1.1875"
Special Order, Ships Nov 25
C$50.99Was C$55.58 Save 8%
View
RPLCMNT C FRAME-40910
  • Fits SPC #40910 #40915 & #40920
  • Replacement C-Frame Component
Special Order, Ships Nov 25
C$259.00Was C$282.31 Save 8%
View
Spanner Wrench 3/8in Drive for Porsche
  • Makes removing the ball joint cap fast and easy
  • Designed for SPC Builder Series ball joints
  • Use torque wrench to set ball joint preload
Special Order, Ships Nov 25
C$49.99Was C$54.49 Save 8%
View
Special Order, Ships Nov 25
C$60.99Was C$66.48 Save 8%
View
Special Order, Ships Nov 25
C$66.99Was C$73.02 Save 8%
View
Special Order, Ships Nov 25
C$62.99Was C$68.66 Save 8%
View
TORQUE EXT 160 FT LBS
  • Some vehicles may require use of longer bolts
  • CAUTION: Check for caliper/rotor clearance
  • Durable plastic construction
Special Order, Ships Nov 25
C$144.99Was C$158.04 Save 8%
View