Trade prices for dealers.

0

Holley parts

In stock
Mid-Mount Race Accessory System
  • Steam tube input port
  • No adapters/spacers required!
  • Works with VVT applications
Out of Stock
C$3,404.99Was C$3,711.44 Save 8%
View
Mid-Rise Plenum Base Adapter Kit - Black
  • Great for supercharged or turbocharged engines
  • Power band from 1500-6500 rpm
  • Cast aluminum construction
Out of Stock
C$567.99Was C$619.11 Save 8%
View
PERFORMANCE PACKAGE 2DR for 2021-2024 Ford Bronco
  • Get 10% Off And Free Freight Shipping On All Performance Packages
  • Make Your Upgrades Easy With Complete Platform Solutions
  • Unlock Your Vehicle’s Full Potential!
Out of Stock
C$15,119.93Was C$16,480.72 Save 8%
View
PERFORMANCE PACKAGE 4DR for 2021-2024 Ford Bronco
  • Get 10% Off And Free Freight Shipping On All Performance Packages
  • Make Your Upgrades Easy With Complete Platform Solutions
  • Unlock Your Vehicle’s Full Potential!
Out of Stock
C$15,119.93Was C$16,480.72 Save 8%
View
Premium Alternator
  • 150 Amp Output
  • Sculpted all aluminum housings
  • Made in the USA
Out of Stock
C$1,195.99Was C$1,303.63 Save 8%
View
R4 Style A/C Compressor Plug-Pigtail
  • Fits Holley 199-100 and similar R4 type compressors
  • Works with all late model R4 compressors with the 8mm pin connector
Out of Stock
C$55.99Was C$61.03 Save 8%
View
Spark Fitting
  • Genuine Holley Quality Parts
Out of Stock
C$39.99Was C$43.59 Save 8%
View
THROTTLE BODY KIT
  • Replacment component for 3310-1; 3310-2; 3310-3; 3310-4
Out of Stock
C$488.99Was C$533.00 Save 8%
View
Cast Aluminum Rear Sump Oil Pan Coyote Swap for Ford
  • Oil pan fits 2011-2017 Gen I and II Coyote engines.
  • Provides 2 Bosses for drain-back for turbo applications (Unmachined)
  • Traditional high-quality cast aluminum appearance with clean exterior styling
Out of Stock
C$794.99Was C$866.54 Save 8%
View
Fuel Bulkhead Fitting Kit
  • 3/8" hose barb to -8AN fitting
  • Hard coat anodized for good looks and corrosion protection
  • Hose length 24"
Out of Stock
C$233.99Was C$255.05 Save 8%
View
FUEL CELL VENT KIT
  • Complete kit with 6 ft of 10AN Nylon Braided hose, all fittings, rollover valve, bulkhead and breather filter
Out of Stock
C$274.99Was C$299.74 Save 8%
View
Fuel Inlet Fitting
  • Aluminum black Anodized
Out of Stock
C$39.99Was C$43.59 Save 8%
View
Fuel Line
  • The fuel lines are 9.75” long (standard fuel line is 9.50”)
  • Increased fuel volume of each bowl extends length by .125” per bowl (.250” overall).
Out of Stock
C$416.99Was C$454.52 Save 8%
View
Idler Pulley
  • Genuine Holley Quality Parts
Out of Stock
C$148.99Was C$162.40 Save 8%
View
IN-LINE FUEL PULSE DAMPER
  • Fittings included for damper/regulator’s and direct mount dampers
  • Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
  • Assembled and tested in the USA
Out of Stock
C$288.99Was C$315.00 Save 8%
View
LS Valley Cover - Trussed for 55 vehicles
  • Precision manufactured from billet aluminum with a modern, race inspired, trussed design
  • Available for GM LS1/LS6 (10 bolt) and LS2/LS3/LS7/LSX (11 bolt) engine applications
  • All necessary gaskets and upgraded mounting hardware sold separately
Out of Stock
C$359.99Was C$392.39 Save 8%
View
Oil Cooler Port Block-Off Plate - Ford 7.3L Godzilla
  • Easy Installation without the need to tap holes or fabricate special plugs and caps
  • Included in Holley Accessory Drive Kits 20-320, 20-320BK, 20-340, and 20-340BK
  • Simply remove and use Earl's 1138ERL or 1139ERL to add an oil cooler
Out of Stock
C$44.99Was C$49.04 Save 8%
View
Power Steering Hardline Kit for Plymouth and Dodge
  • Requires the Use of BH23104 Headers and Borgeson Power Steering Box 800126 or 800127
  • Includes Two Steel Hardlines with Nickel Plated Finish & Billet Aluminum Line Separator
  • Ideal for Use with Earls Power Steering Hose & Hose Ends
Out of Stock
C$239.99Was C$261.59 Save 8%
View
Replacement Hardware for Alternator Bracket
  • Works with or without an air conditioning compressor
  • Works with or without a power steering pump
  • Ideal for use on Godzilla crate engines & engine swaps
Out of Stock
C$42.99Was C$46.86 Save 8%
View
Stealthram Gasket
  • 2 Per Package
Out of Stock
C$70.99Was C$77.38 Save 8%
View
Vintage Series GM Licensed Air Cleaner - Polished
  • 14” diameter die-cast aluminum construction with finned design and an iconic Chevy “Bowtie” logo
  • Available with replacement paper filter or reusable cotton gauze (red) style air filter elements
  • Includes stamped steel color matched SureFlo style base with knock out provisions for fresh air adapter
Out of Stock
C$427.99Was C$466.51 Save 8%
View
Float
  • Genuine Holley Quality Parts
Out of Stock
C$34.99Was C$38.14 Save 8%
View
Billet Regulator Bracket
  • Black anodized billet construction
  • Simplifies mounting Holley fuel pressure regulators
  • Included hardware for easy installation
Out of Stock
C$133.99Was C$146.05 Save 8%
View
Billet Regulator Bracket
  • Black anodized billet construction
  • Simplifies mounting Holley fuel pressure regulators
  • Included hardware for easy installation
Out of Stock
C$122.99Was C$134.06 Save 8%
View
CARBURETOR LINKAGE KIT FOR 3X2 SBC
  • Specifically designed for 3X2 Carburetor set-up
  • Kit includes 2 linkage arms, 2 nuts, 2 washers, and 2 cotter pins
Out of Stock
C$467.99Was C$510.11 Save 8%
View
Complete Transmission Installation Kit
  • Designed for 28-ounce balance Small Block Ford engines using a TKX or TKO transmission
  • Works with OE (original equipment) or MSD High Torque starters
  • All hardware included
Out of Stock
C$3,641.99Was C$3,969.77 Save 8%
View
Fuel Cell Rollover Valve
  • 10AN ORB port to 10AN male
  • Low-profile design
  • Pump gas and E85 compatible
Out of Stock
C$69.99Was C$76.29 Save 8%
View
Fuel Filter Element and O-ring Kit
  • Replacement filter element for 100 GPH Holley billet fuel filter
  • Includes 40 micron stainless steel woven mesh filter element and O-rings
Out of Stock
C$29.99Was C$32.69 Save 8%
View
Fuel Inlet Fitting
  • Aluminum red Anodized
Out of Stock
C$25.99Was C$28.33 Save 8%
View
Fuel Inlet Fitting
  • Long Fuel Inlet Fitting
  • Red Anodized Aluminum
Out of Stock
C$33.99Was C$37.05 Save 8%
View
GM SILVERADO/ PERFORMANCE PACKAGE for Chevrolet and GMC
  • Get 10% Off And Free Freight Shipping On All Performance Packages
  • Make Your Upgrades Easy With Complete Platform Solutions
  • Unlock Your Vehicle’s Full Potential!
Out of Stock
C$6,089.93Was C$6,638.02 Save 8%
View
LS High-Mount A/C Accessory Drive Kit
  • INCLUDES THE FOLLOWING ITEMS
  • 20-134 - LS A/C BRACKET KIT PASSENGER SIDE
  • 97-151 - TENSIONER ASSM W/GROOVED PULLEY
Out of Stock
C$1,792.99Was C$1,954.36 Save 8%
View
LS High-Mount A/C Accessory Drive Kit
  • INCLUDES THE FOLLOWING ITEMS
  • 20-134 - LS A/C BRACKET KIT PASSENGER SIDE
  • 97-151 - TENSIONER ASSM W/GROOVED PULLEY
Out of Stock
C$1,707.99Was C$1,861.71 Save 8%
View
LS/LT High-Mount Accessory Drive Bracket
  • The most cost effective LS bracket solution on the market!
  • Simple, dedicated installation kits allow easy fitment to Corvette, F-Body or Truck drive offsets
  • A/C bracket accepts GM R4 compressor (Sanden version now available)
Out of Stock
C$800.99Was C$873.08 Save 8%
View
LS Valley Cover - Trussed for 52 vehicles
  • Precision manufactured from billet aluminum with a modern, race inspired, trussed design
  • Available for GM LS1/LS6 (10 bolt) and LS2/LS3/LS7/LSX (11 bolt) engine applications
  • All necessary gaskets and upgraded mounting hardware sold separately
Out of Stock
C$352.99Was C$384.76 Save 8%
View
LS Valve Cover Adapter Plates for 64 vehicles
  • Constructed of Cast Aluminum
  • Available in three finishes (Natural Cast, Black Painted, and Polished Finish)
  • Allows installation of LS style valve covers onto Chevy small block engines
Out of Stock
C$496.99Was C$541.72 Save 8%
View
Replacement DAMPER/HUB Assembly
  • Genuine Holley Quality Parts
  • Replacement cast iron style damper for accessory drive systems 20-205 and 20-205BK
  • Made from cast iron with black painted finish
Out of Stock
C$682.99Was C$744.46 Save 8%
View
Replacement Main Body
  • Main bodies are factory assembled and kit includes new gaskets to complete the installation
  • Simple installation with common hand tools that you already have in your shop
  • Main bodies are available for our most popular carburetor models
Out of Stock
C$407.99Was C$444.71 Save 8%
View
-10 AN Male to 3/4"-16 O-Ring Port
  • Made in the USA
  • Available for Any Plumbing Situation And Many Custom Applications
Out of Stock
C$39.99Was C$43.59 Save 8%
View
3" X 8" HydraMat®, Rectangle Center Outlet
  • The outlet has 6 positions to orient the HydraMat for best location in the fuel cell
  • Eliminates the need for specialty reservoirs, sumps and pick up pumps saving cost and greatly reducing complexity
  • Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump
Out of Stock
C$366.99Was C$400.02 Save 8%
View
Air Cleaner Replacement Element
  • Replacment "Filter" for Custom Air Cleaner Assembly 120-141
Out of Stock
C$93.99Was C$102.45 Save 8%
View
Carburetor Throttle Shaft Conversion Kits
  • Kit Contains Primary & Secondary Throttle Shaft Assy. and eight Throttle Plate Mounting Screws.
Out of Stock
C$186.99Was C$203.82 Save 8%
View
Cast Aluminum Timing Chain Cover
  • Accommodates both stock and aftermarket water pumps
  • Includes high quality gasket, corrosion resistant E-coated hardware, and dowel pins
  • Offered in Natural Cast and Satin Black finishes
Out of Stock
C$209.99Was C$228.89 Save 8%
View
Complete Transmission Installation Kit
  • Billet steel flywheel for light weight (28 pounds) and additional strength
  • Works with OE (original equipment) or MSD High Torque starters
  • All hardware included
Out of Stock
C$2,850.99Was C$3,107.58 Save 8%
View
Complete Transmission Installation Kit
  • Billet steel flywheel for light weight (28 pounds) and additional strength
  • Works with OE (original equipment) or MSD High Torque starters
  • All hardware included (flywheel, transmission, and engine connections)
Out of Stock
C$2,646.99Was C$2,885.22 Save 8%
View
Detent Cable Bracket
  • Light-Weight Billet Aluminum
  • Black Anodized For Long Lasting Good Looks
  • Works With Lokar Style cables
Out of Stock
C$110.99Was C$120.98 Save 8%
View
Diecast In-Tank RetroFit Fuel Module Returnless System
  • The easiest way to convert your vehicle to an in-tank, EFI fuel system
  • ¼” NPT ports for a wide variety of plumbing options
  • Optional roll over valve available
Out of Stock
C$1,360.99Was C$1,483.48 Save 8%
View
Fuel Cell EFI Pump Module Assembly
  • Update your fuel cell to EFI the easy way!
  • Designed to drop right into your existing 12 bolt flange fuel cell
  • Module with Dual 450 LPH fuel pumps configurations
Out of Stock
C$1,360.99Was C$1,483.48 Save 8%
View
Fuel Inlet Fitting
  • Aluminum Blue Anodized
Out of Stock
C$42.99Was C$46.86 Save 8%
View
Fuel Line
  • Genuine Holley Quality Parts
Out of Stock
C$330.99Was C$360.78 Save 8%
View
Fuel Pump Rotor And Vane Kit
  • Rotor and vane kit for 12-801-1, 12-802-1, 12-812-1 and 12-815-1 fuel pumps
  • Includes lower gasket, rotor and (4) vanes
Out of Stock
C$67.99Was C$74.11 Save 8%
View
Gen 3 Dominator Air Scoop Adapter – Black
  • CNC machined from billet aluminum
  • Available in clear or black anodize for corrosion protection and good looks
  • Includes adapter and carburetor to adapter mounting hardware
Out of Stock
C$408.99Was C$445.80 Save 8%
View
Hi-Ram Intake - GM LS3/L92
  • Mounting Flange Gasket Type – Standard LS3 Molded O-Ring
  • Port Size – 2.49” Height x 1.21” Wide
  • Plenum Top Gasket Type – 3/32” Round O-ring Cord
Out of Stock
C$1,792.99Was C$1,954.36 Save 8%
View
Low-Profile Intake Manifold - Godzilla - Black Powdercoat
  • Removable lower intake panel that can be removed for additional porting, nitrous, etc
  • Compatible with OE or Holley accesory drives and OE or Holley Fuel Rails
  • Includes 3/8 NPT, 1/4 NPT and 1/8 NPT vacuum ports at rear of manifold
Out of Stock
C$1,707.99Was C$1,861.71 Save 8%
View
LS Valve Cover Adapter Plates for 64 vehicles
  • Constructed of Cast Aluminum
  • Available in three finishes (Natural Cast, Black Painted, and Polished Finish)
  • Allows installation of LS style valve covers onto Chevy small block engines
Out of Stock
C$343.99Was C$374.95 Save 8%
View
MANIFOLD-BRACKET KIT, LT4 WET-NATURAL
  • Cast aluminum water pump manifold used in LT4 kit 20-220
  • Genuine Holley Quality Parts
Out of Stock
C$747.99Was C$815.31 Save 8%
View
351W Ford Hi-Ram Carbureted Manifold Base
  • Plenum Top Gasket Type – 3/32” Round O-ring Cord
  • Requires the Use of Holley EFI Dual Sync Distributor - 565-111
  • Manifold is designed for a 9.5" deck height.
Out of Stock
C$1,248.99Was C$1,361.40 Save 8%
View
Accelerator Pump Cover
  • Genuine Holley Quality Parts
Out of Stock
C$65.99Was C$71.93 Save 8%
View
Complete Transmission Installation Kit
  • Billet steel 36 lb, 168 tooth neutral balanced flywheel for light weight and strength
  • Works with OE (original equipment) or MSD High Torque starters
  • All hardware included
Out of Stock
C$3,641.99Was C$3,969.77 Save 8%
View
Diecast In-Tank RetroFit Fuel Module Returnless System
  • The easiest way to convert your vehicle to an in-tank, EFI fuel system
  • ¼” NPT ports for a wide variety of plumbing options
  • Optional roll over valve available
Out of Stock
C$1,520.99Was C$1,657.88 Save 8%
View
Flexible In Tank Fuel Line
  • 10MM ID
  • 80MM Long
  • Compatible for all fuel types
Out of Stock
C$8.99Was C$9.80 Save 8%
View
Ford 7.3L Godzilla Alternator and Bracket Kit
  • Works with or without an air conditioning compressor
  • Works with or without a power steering pump
  • Ideal for use on Godzilla crate engines & engine swaps
Out of Stock
C$853.99Was C$930.85 Save 8%
View
Fuel Inlet Fitting
  • Long Fuel Inlet Fitting
  • Black Anodized Aluminum
Out of Stock
C$49.99Was C$54.49 Save 8%
View
Fuel Line Kit - 3X2 Carb set-up
  • Specifically designed for 3X2 Carburetor Set-ups
Out of Stock
C$369.99Was C$403.29 Save 8%
View
Fuel Rail Kit
  • Genuine Holley Quality Parts
  • 6AN Fuel Rails
Out of Stock
C$257.99Was C$281.21 Save 8%
View
Godzilla High-Mount Accessory Drive
  • New oil pan hardware and dipstick included
  • Includes new front main seal and installation tool
  • Choose from natural as-cast aluminum or black finish
Out of Stock
C$2,475.99Was C$2,698.83 Save 8%
View
Hi-Ram Intake Plenum Top, 2 x 4150 - Big Block Chevy / Small Block Chevy
  • The Big Block Chevy Hi-Ram manifold is available in either a traditional Hi-Ram 105mm plenum top or with a 2 x 4150…
  • Requires the use of early type GM or small cap MSD or Holley Distributors. Not compatible with HEI distributors
  • Cast 356-T6 Aluminum Construction, Natural, Satin As-Cast Aluminum Finish
Out of Stock
C$374.99Was C$408.74 Save 8%
View
HYDRAMAT (3X8) 19MM Center
  • Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions
  • Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump
  • Can be folded and compressed for easy installation through a variety of fuel cell openings
Out of Stock
C$375.99Was C$409.83 Save 8%
View
IN-LINE FUEL PULSE DAMPER
  • Fittings included for damper/regulator’s and direct mount dampers
  • Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
  • Assembled and tested in the USA
Out of Stock
C$288.99Was C$315.00 Save 8%
View
Intake Manifold Spacer
  • Cast Aluminum
  • Dominator To Square Bore
  • 2 1/4" Height
Out of Stock
C$343.99Was C$374.95 Save 8%
View