Trade prices for dealers.

0

Holley parts

In stock
351W Ford Hi-Ram Carbureted Manifold Base
  • Plenum Top Gasket Type – 3/32” Round O-ring Cord
  • Requires the Use of Holley EFI Dual Sync Distributor - 565-111
  • Manifold is designed for a 9.5" deck height.
Out of Stock
C$1,248.99Was C$1,361.40 Save 8%
View
Accelerator Pump Cover
  • Genuine Holley Quality Parts
Out of Stock
C$65.99Was C$71.93 Save 8%
View
Complete Transmission Installation Kit
  • Billet steel 36 lb, 168 tooth neutral balanced flywheel for light weight and strength
  • Works with OE (original equipment) or MSD High Torque starters
  • All hardware included
Out of Stock
C$3,641.99Was C$3,969.77 Save 8%
View
Diecast In-Tank RetroFit Fuel Module Returnless System
  • The easiest way to convert your vehicle to an in-tank, EFI fuel system
  • ¼” NPT ports for a wide variety of plumbing options
  • Optional roll over valve available
Out of Stock
C$1,520.99Was C$1,657.88 Save 8%
View
Flexible In Tank Fuel Line
  • 10MM ID
  • 80MM Long
  • Compatible for all fuel types
Out of Stock
C$8.99Was C$9.80 Save 8%
View
Ford 7.3L Godzilla Alternator and Bracket Kit
  • Works with or without an air conditioning compressor
  • Works with or without a power steering pump
  • Ideal for use on Godzilla crate engines & engine swaps
Out of Stock
C$853.99Was C$930.85 Save 8%
View
Fuel Inlet Fitting
  • Long Fuel Inlet Fitting
  • Black Anodized Aluminum
Out of Stock
C$49.99Was C$54.49 Save 8%
View
Fuel Line Kit - 3X2 Carb set-up
  • Specifically designed for 3X2 Carburetor Set-ups
Out of Stock
C$369.99Was C$403.29 Save 8%
View
Fuel Rail Kit
  • Genuine Holley Quality Parts
  • 6AN Fuel Rails
Out of Stock
C$257.99Was C$281.21 Save 8%
View
Godzilla High-Mount Accessory Drive
  • New oil pan hardware and dipstick included
  • Includes new front main seal and installation tool
  • Choose from natural as-cast aluminum or black finish
Out of Stock
C$2,475.99Was C$2,698.83 Save 8%
View
Hi-Ram Intake Plenum Top, 2 x 4150 - Big Block Chevy / Small Block Chevy
  • The Big Block Chevy Hi-Ram manifold is available in either a traditional Hi-Ram 105mm plenum top or with a 2 x 4150…
  • Requires the use of early type GM or small cap MSD or Holley Distributors. Not compatible with HEI distributors
  • Cast 356-T6 Aluminum Construction, Natural, Satin As-Cast Aluminum Finish
Out of Stock
C$374.99Was C$408.74 Save 8%
View
HYDRAMAT (3X8) 19MM Center
  • Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions
  • Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump
  • Can be folded and compressed for easy installation through a variety of fuel cell openings
Out of Stock
C$375.99Was C$409.83 Save 8%
View
IN-LINE FUEL PULSE DAMPER
  • Fittings included for damper/regulator’s and direct mount dampers
  • Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
  • Assembled and tested in the USA
Out of Stock
C$288.99Was C$315.00 Save 8%
View
Intake Manifold Spacer
  • Cast Aluminum
  • Dominator To Square Bore
  • 2 1/4" Height
Out of Stock
C$343.99Was C$374.95 Save 8%
View
LS High-Mount A/C Accessory Drive Kit
  • INCLUDES THE FOLLOWING ITEMS
  • 20-134 - LS A/C BRACKET KIT PASSENGER SIDE
  • 97-151 - TENSIONER ASSM W/GROOVED PULLEY
Out of Stock
C$1,707.99Was C$1,861.71 Save 8%
View
LS Valley Cover - Trussed for 55 vehicles
  • Precision manufactured from billet aluminum with a modern, race inspired, trussed design
  • Available for GM LS1/LS6 (10 bolt) and LS2/LS3/LS7/LSX (11 bolt) engine applications
  • All necessary gaskets and upgraded mounting hardware sold separately
Out of Stock
C$411.99Was C$449.07 Save 8%
View
Marine Carb Renew Kit
  • Contains all parts and gaskets necessary to restore your marine carburetor to like new performance
  • Detailed instructions included
Out of Stock
C$152.99Was C$166.76 Save 8%
View
Marine Carb Renew Kits
  • Contains all parts and gaskets necessary to restore your marine carburetor to like new performance
  • Detailed instructions included
Out of Stock
C$111.99Was C$122.07 Save 8%
View
Rear Block Plug Kit - Ford Godzilla Engine
  • Works with 97-425 (front/heater block-off kit) to block all cooling ports
  • Steel plug features a clear zinc-plated finish
  • Ideal for use in engine swaps or racing applications that do not require a heater
Out of Stock
C$39.99Was C$43.59 Save 8%
View
Replacement Main Body
  • Main bodies are factory assembled and kit includes new gaskets to complete the installation
  • Simple installation with common hand tools that you already have in your shop
  • Main bodies are available for our most popular carburetor models
Out of Stock
C$385.99Was C$420.73 Save 8%
View
RetroFilter Drive-By-Wire Air Cleaner - 14-Inch Diameter
  • Available in Black and Chrome finishes
  • Adapts to LS style drive-by-wire throttle bodies found on the LS2, LS3, LS7, etc.
  • Stamped aluminum lid and base for optimal durability and light weight
Out of Stock
C$418.99Was C$456.70 Save 8%
View
SD7 A/C Compressor
  • Pre-filled with the correct oil type
Out of Stock
C$976.99Was C$1,064.92 Save 8%
View
T56 Release Bearing Shim
  • Also available in a convenience Master kit, Holley Part # 319-204 contains (1) shim of each thickness
Out of Stock
C$2.99Was C$3.26 Save 8%
View
Water Pump Assembly
  • Genuine Holley Quality Parts
Out of Stock
C$377.99Was C$412.01 Save 8%
View
X3 PERFORMANCE PACKAGE 4DR for Can-Am
  • Trusted Brands Like XDR, ADS Racing Shocks, Simpson And More
  • Make Your Upgrades Easy With Complete Platform Solutions
  • Unlock Your Vehicle’s Full Potential!
Out of Stock
C$21,979.93Was C$23,958.12 Save 8%
View