Trade prices for dealers.

0

Holley parts

In stock
Replacement DAMPER/HUB Assembly
  • Genuine Holley Quality Parts
  • Replacement cast iron style damper for accessory drive systems 20-205 and 20-205BK
  • Made from cast iron with black painted finish
Out of Stock
C$682.99Was C$744.46 Save 8%
View
Replacement Main Body
  • Main bodies are factory assembled and kit includes new gaskets to complete the installation
  • Simple installation with common hand tools that you already have in your shop
  • Main bodies are available for our most popular carburetor models
Out of Stock
C$407.99Was C$444.71 Save 8%
View
-10 AN Male to 3/4"-16 O-Ring Port
  • Made in the USA
  • Available for Any Plumbing Situation And Many Custom Applications
Out of Stock
C$39.99Was C$43.59 Save 8%
View
3" X 8" HydraMat®, Rectangle Center Outlet
  • The outlet has 6 positions to orient the HydraMat for best location in the fuel cell
  • Eliminates the need for specialty reservoirs, sumps and pick up pumps saving cost and greatly reducing complexity
  • Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump
Out of Stock
C$366.99Was C$400.02 Save 8%
View
Air Cleaner Replacement Element
  • Replacment "Filter" for Custom Air Cleaner Assembly 120-141
Out of Stock
C$93.99Was C$102.45 Save 8%
View
Carburetor Throttle Shaft Conversion Kits
  • Kit Contains Primary & Secondary Throttle Shaft Assy. and eight Throttle Plate Mounting Screws.
Out of Stock
C$186.99Was C$203.82 Save 8%
View
Cast Aluminum Timing Chain Cover
  • Accommodates both stock and aftermarket water pumps
  • Includes high quality gasket, corrosion resistant E-coated hardware, and dowel pins
  • Offered in Natural Cast and Satin Black finishes
Out of Stock
C$209.99Was C$228.89 Save 8%
View
Complete Transmission Installation Kit
  • Billet steel flywheel for light weight (28 pounds) and additional strength
  • Works with OE (original equipment) or MSD High Torque starters
  • All hardware included
Out of Stock
C$2,850.99Was C$3,107.58 Save 8%
View
Complete Transmission Installation Kit
  • Billet steel flywheel for light weight (28 pounds) and additional strength
  • Works with OE (original equipment) or MSD High Torque starters
  • All hardware included (flywheel, transmission, and engine connections)
Out of Stock
C$2,646.99Was C$2,885.22 Save 8%
View
Detent Cable Bracket
  • Light-Weight Billet Aluminum
  • Black Anodized For Long Lasting Good Looks
  • Works With Lokar Style cables
Out of Stock
C$110.99Was C$120.98 Save 8%
View
Diecast In-Tank RetroFit Fuel Module Returnless System
  • The easiest way to convert your vehicle to an in-tank, EFI fuel system
  • ¼” NPT ports for a wide variety of plumbing options
  • Optional roll over valve available
Out of Stock
C$1,360.99Was C$1,483.48 Save 8%
View
Fuel Cell EFI Pump Module Assembly
  • Update your fuel cell to EFI the easy way!
  • Designed to drop right into your existing 12 bolt flange fuel cell
  • Module with Dual 450 LPH fuel pumps configurations
Out of Stock
C$1,360.99Was C$1,483.48 Save 8%
View
Fuel Inlet Fitting
  • Aluminum Blue Anodized
Out of Stock
C$42.99Was C$46.86 Save 8%
View
Fuel Line
  • Genuine Holley Quality Parts
Out of Stock
C$330.99Was C$360.78 Save 8%
View
Fuel Pump Rotor And Vane Kit
  • Rotor and vane kit for 12-801-1, 12-802-1, 12-812-1 and 12-815-1 fuel pumps
  • Includes lower gasket, rotor and (4) vanes
Out of Stock
C$67.99Was C$74.11 Save 8%
View
Gen 3 Dominator Air Scoop Adapter – Black
  • CNC machined from billet aluminum
  • Available in clear or black anodize for corrosion protection and good looks
  • Includes adapter and carburetor to adapter mounting hardware
Out of Stock
C$408.99Was C$445.80 Save 8%
View
Hi-Ram Intake - GM LS3/L92
  • Mounting Flange Gasket Type – Standard LS3 Molded O-Ring
  • Port Size – 2.49” Height x 1.21” Wide
  • Plenum Top Gasket Type – 3/32” Round O-ring Cord
Out of Stock
C$1,792.99Was C$1,954.36 Save 8%
View
Low-Profile Intake Manifold - Godzilla - Black Powdercoat
  • Removable lower intake panel that can be removed for additional porting, nitrous, etc
  • Compatible with OE or Holley accesory drives and OE or Holley Fuel Rails
  • Includes 3/8 NPT, 1/4 NPT and 1/8 NPT vacuum ports at rear of manifold
Out of Stock
C$1,707.99Was C$1,861.71 Save 8%
View
LS Valve Cover Adapter Plates for 64 vehicles
  • Constructed of Cast Aluminum
  • Available in three finishes (Natural Cast, Black Painted, and Polished Finish)
  • Allows installation of LS style valve covers onto Chevy small block engines
Out of Stock
C$343.99Was C$374.95 Save 8%
View
MANIFOLD-BRACKET KIT, LT4 WET-NATURAL
  • Cast aluminum water pump manifold used in LT4 kit 20-220
  • Genuine Holley Quality Parts
Out of Stock
C$747.99Was C$815.31 Save 8%
View
351W Ford Hi-Ram Carbureted Manifold Base
  • Plenum Top Gasket Type – 3/32” Round O-ring Cord
  • Requires the Use of Holley EFI Dual Sync Distributor - 565-111
  • Manifold is designed for a 9.5" deck height.
Out of Stock
C$1,248.99Was C$1,361.40 Save 8%
View
Accelerator Pump Cover
  • Genuine Holley Quality Parts
Out of Stock
C$65.99Was C$71.93 Save 8%
View
Complete Transmission Installation Kit
  • Billet steel 36 lb, 168 tooth neutral balanced flywheel for light weight and strength
  • Works with OE (original equipment) or MSD High Torque starters
  • All hardware included
Out of Stock
C$3,641.99Was C$3,969.77 Save 8%
View
Diecast In-Tank RetroFit Fuel Module Returnless System
  • The easiest way to convert your vehicle to an in-tank, EFI fuel system
  • ¼” NPT ports for a wide variety of plumbing options
  • Optional roll over valve available
Out of Stock
C$1,520.99Was C$1,657.88 Save 8%
View
Flexible In Tank Fuel Line
  • 10MM ID
  • 80MM Long
  • Compatible for all fuel types
Out of Stock
C$8.99Was C$9.80 Save 8%
View
Ford 7.3L Godzilla Alternator and Bracket Kit
  • Works with or without an air conditioning compressor
  • Works with or without a power steering pump
  • Ideal for use on Godzilla crate engines & engine swaps
Out of Stock
C$853.99Was C$930.85 Save 8%
View
Fuel Inlet Fitting
  • Long Fuel Inlet Fitting
  • Black Anodized Aluminum
Out of Stock
C$49.99Was C$54.49 Save 8%
View
Fuel Line Kit - 3X2 Carb set-up
  • Specifically designed for 3X2 Carburetor Set-ups
Out of Stock
C$369.99Was C$403.29 Save 8%
View
Fuel Rail Kit
  • Genuine Holley Quality Parts
  • 6AN Fuel Rails
Out of Stock
C$257.99Was C$281.21 Save 8%
View
Godzilla High-Mount Accessory Drive
  • New oil pan hardware and dipstick included
  • Includes new front main seal and installation tool
  • Choose from natural as-cast aluminum or black finish
Out of Stock
C$2,475.99Was C$2,698.83 Save 8%
View
Hi-Ram Intake Plenum Top, 2 x 4150 - Big Block Chevy / Small Block Chevy
  • The Big Block Chevy Hi-Ram manifold is available in either a traditional Hi-Ram 105mm plenum top or with a 2 x 4150…
  • Requires the use of early type GM or small cap MSD or Holley Distributors. Not compatible with HEI distributors
  • Cast 356-T6 Aluminum Construction, Natural, Satin As-Cast Aluminum Finish
Out of Stock
C$374.99Was C$408.74 Save 8%
View
HYDRAMAT (3X8) 19MM Center
  • Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions
  • Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump
  • Can be folded and compressed for easy installation through a variety of fuel cell openings
Out of Stock
C$375.99Was C$409.83 Save 8%
View
IN-LINE FUEL PULSE DAMPER
  • Fittings included for damper/regulator’s and direct mount dampers
  • Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
  • Assembled and tested in the USA
Out of Stock
C$288.99Was C$315.00 Save 8%
View
Intake Manifold Spacer
  • Cast Aluminum
  • Dominator To Square Bore
  • 2 1/4" Height
Out of Stock
C$343.99Was C$374.95 Save 8%
View
LS High-Mount A/C Accessory Drive Kit
  • INCLUDES THE FOLLOWING ITEMS
  • 20-134 - LS A/C BRACKET KIT PASSENGER SIDE
  • 97-151 - TENSIONER ASSM W/GROOVED PULLEY
Out of Stock
C$1,707.99Was C$1,861.71 Save 8%
View
LS Valley Cover - Trussed for 55 vehicles
  • Precision manufactured from billet aluminum with a modern, race inspired, trussed design
  • Available for GM LS1/LS6 (10 bolt) and LS2/LS3/LS7/LSX (11 bolt) engine applications
  • All necessary gaskets and upgraded mounting hardware sold separately
Out of Stock
C$411.99Was C$449.07 Save 8%
View
Marine Carb Renew Kit
  • Contains all parts and gaskets necessary to restore your marine carburetor to like new performance
  • Detailed instructions included
Out of Stock
C$152.99Was C$166.76 Save 8%
View
Marine Carb Renew Kits
  • Contains all parts and gaskets necessary to restore your marine carburetor to like new performance
  • Detailed instructions included
Out of Stock
C$111.99Was C$122.07 Save 8%
View
Rear Block Plug Kit - Ford Godzilla Engine
  • Works with 97-425 (front/heater block-off kit) to block all cooling ports
  • Steel plug features a clear zinc-plated finish
  • Ideal for use in engine swaps or racing applications that do not require a heater
Out of Stock
C$39.99Was C$43.59 Save 8%
View
Replacement Main Body
  • Main bodies are factory assembled and kit includes new gaskets to complete the installation
  • Simple installation with common hand tools that you already have in your shop
  • Main bodies are available for our most popular carburetor models
Out of Stock
C$385.99Was C$420.73 Save 8%
View
RetroFilter Drive-By-Wire Air Cleaner - 14-Inch Diameter
  • Available in Black and Chrome finishes
  • Adapts to LS style drive-by-wire throttle bodies found on the LS2, LS3, LS7, etc.
  • Stamped aluminum lid and base for optimal durability and light weight
Out of Stock
C$418.99Was C$456.70 Save 8%
View
SD7 A/C Compressor
  • Pre-filled with the correct oil type
Out of Stock
C$976.99Was C$1,064.92 Save 8%
View
T56 Release Bearing Shim
  • Also available in a convenience Master kit, Holley Part # 319-204 contains (1) shim of each thickness
Out of Stock
C$2.99Was C$3.26 Save 8%
View
Water Pump Assembly
  • Genuine Holley Quality Parts
Out of Stock
C$377.99Was C$412.01 Save 8%
View
X3 PERFORMANCE PACKAGE 4DR for Can-Am
  • Trusted Brands Like XDR, ADS Racing Shocks, Simpson And More
  • Make Your Upgrades Easy With Complete Platform Solutions
  • Unlock Your Vehicle’s Full Potential!
Out of Stock
C$21,979.93Was C$23,958.12 Save 8%
View
2.5" x 8" HydraMat®, Rectangle
  • Works with Alcohol, Ethanol, Methanol, and E-85 fuels
  • Works with 2-cycle oil blends as high as 20:1
  • Not for use with diesel fuels
Out of Stock
C$374.99Was C$408.74 Save 8%
View
30" x 14" HydraMat®, Rectangle
  • Works with Alcohol, Ethanol, Methanol, and E-85 fuels
  • Works with 2-cycle oil blends as high as 20:1
  • Not for use with diesel fuels
Out of Stock
C$1,792.99Was C$1,954.36 Save 8%
View
Carburetor Adapter Plate
  • Cast aluminum
  • Can also be used in reverse
  • Will allow any 4150 or 4160 carburetor to be mounted on manifolds designed originally for Rochester Quadra-Jet or Carter…
Out of Stock
C$189.99Was C$207.09 Save 8%
View
Carburetor Throttle Cable Bracket
  • Kit Contains Bracket and Longer Carburetor Mounting Stud.
Out of Stock
C$106.99Was C$116.62 Save 8%
View
Classic Carburetor for 578 vehicles
  • Calibrated and intended for small V-8 engines
  • Single feed fuel inlet for easy installation
  • Power valve blow-out protection
Out of Stock
C$1,360.99Was C$1,483.48 Save 8%
View
Complete Transmission Installation Kit
  • Designed for 1970-1990 454 Big Block Chevrolet Engines using a TKX or TKO transmission
  • Works with OE (original equipment) or MSD High Torque starters
  • All hardware included
Out of Stock
C$3,641.99Was C$3,969.77 Save 8%
View
Complete Transmission Installation Kit
  • Billet steel flywheel for light weight (28 pounds) and additional strength
  • Works with OE (original equipment) or MSD High Torque starters
  • All hardware included (flywheel, transmission, and engine connections)
Out of Stock
C$1,866.99Was C$2,035.02 Save 8%
View
Complete Transmission Installation Kit
  • Designed for 28-ounce balance Small Block Ford engines using a T5 transmission
  • Works with OE (original equipment) or MSD High Torque starters
  • All hardware included
Out of Stock
C$3,641.99Was C$3,969.77 Save 8%
View
DIRECT MOUNT FUEL PULSE DAMPER
  • Fittings included for damper/regulator’s and direct mount dampers
  • Vacuum fitting and one foot of hose included with all dampers for vacuum referencing
  • Assembled and tested in the USA
Out of Stock
C$220.99Was C$240.88 Save 8%
View
Drive by Wire Pedal Bracket for 1987-1996 Dodge Dakota
  • Installs in stock location using factory hardware for easy installation
  • Ideal for Gen III Hemi Swaps with Holley EFI systems
  • Simplify your engine swap with a bolt-in pedal conversion
Out of Stock
C$315.99Was C$344.43 Save 8%
View
Flexible In Tank Fuel Line
  • 8MM ID
  • 160MM Long
  • Compatible for all fuel types
Out of Stock
C$10.99Was C$11.98 Save 8%
View
Fuel Cell EFI Pump Module Assembly
  • Update your fuel cell to EFI the easy way!
  • Designed to drop right into your existing 12 bolt flange fuel cell
  • Module with Dual 255 LPH fuel pumps configurations
Out of Stock
C$1,440.99Was C$1,570.68 Save 8%
View
Fuel Filter Element and O-ring Kit
  • Replacement filter element for 175 GPH Holley billet fuel filter
  • Includes 100 micron stainless steel woven mesh filter element and O-rings
Out of Stock
C$42.99Was C$46.86 Save 8%
View
Fuel Inlet Fitting
  • Aluminum red Anodized
Out of Stock
C$25.99Was C$28.33 Save 8%
View
Out of Stock
C$39.99Was C$43.59 Save 8%
View
Fuel Line
  • Rugged Billet Construction
  • AN fittings
  • Red and Blue Anodized
Out of Stock
C$360.99Was C$393.48 Save 8%
View
Hi-Ram Lower Manifold - GM LS3/L92
  • Plenum Top Gasket Type – 3/32” Round O-ring Cord
  • Port Size – 2.49” Height x 1.21” Wide
  • Mounting Flange Gasket Type – Standard LS3 Molded O-Ring
Out of Stock
C$1,451.99Was C$1,582.67 Save 8%
View
Hi-Ram Lower Manifold - GM LS7
  • Mounting Flange Gasket Type – Standard LS3 Molded O-Ring
  • Plenum Top Gasket Type – 3/32” Round O-ring Cord
  • Port Size – 2.49” Height x 1.21” Wide
Out of Stock
C$1,451.99Was C$1,582.67 Save 8%
View
Out of Stock
C$499.99Was C$544.99 Save 8%
View
PERFORMANCE PACKAGE for 2016-2023 Toyota Tacoma
  • Get 10% Off And Free Freight Shipping On All Performance Packages
  • Make Your Upgrades Easy With Complete Platform Solutions
  • Unlock Your Vehicle’s Full Potential!
Out of Stock
C$4,969.93Was C$5,417.22 Save 8%
View
Power Steering Kit for Gen III Hemi Swaps
  • Works with factory timing cover – Mopar PN 53022195AM
  • Power steering pump assembly includes a plastic reservoir
  • Ideal for use in engine swaps
Out of Stock
C$853.99Was C$930.85 Save 8%
View
PULLEY SMALL P/S PUMP (USE W/UNDERDRIVE BALANCER)
  • Works with standard 1997 and up Corvette power steering pump (Saginaw TC type)
  • Must be used with a 25% under drive balancer to prevent over RPM of the P/S pump
  • Black OE coating and design
Out of Stock
C$139.99Was C$152.59 Save 8%
View
Replacement Hardware Kit
  • Replacement Hardware for Gen III Hemi Mid-Mount Accessory Drive System
Out of Stock
C$102.99Was C$112.26 Save 8%
View
Replacement Main Body
  • Main bodies are factory assembled and kit includes new gaskets to complete the installation
  • Simple installation with common hand tools that you already have in your shop
  • Main bodies are available for our most popular carburetor models
Out of Stock
C$289.99Was C$316.09 Save 8%
View
RetroFilter Drive-By-Wire Air Cleaner - 16-Inch Diameter - Black
  • Available in Black and Chrome finishes
  • Adapts to LS style drive-by-wire throttle bodies found on the LS2, LS3, LS7, etc.
  • Stamped aluminum lid and base for optimal durability and light weight
Out of Stock
C$346.99Was C$378.22 Save 8%
View
T-56 or Magnum Release Bearing Shim Kit
  • The 6061 aluminum clutch release bearing shims for T-56 transmission are critical for a hydraulic clutch that properly…
  • Available individually in three thicknesses-.059, .119, and .197 inch
  • Also available in a convenience Master kit, Holley Part # 319-204 contains (1) shim of each thickness
Out of Stock
C$98.99Was C$107.90 Save 8%
View
T56 Release Bearing Shim
  • Also available in a convenience Master kit, Holley Part # 319-204 contains (1) shim of each thickness
Out of Stock
C$2.99Was C$3.26 Save 8%
View
X3 PERFORMANCE PACKAGE 2DR for Can-Am
  • Trusted Brands Like XDR, ADS Racing Shocks, Simpson And More
  • Make Your Upgrades Easy With Complete Platform Solutions
  • Unlock Your Vehicle’s Full Potential!
Out of Stock
C$19,459.93Was C$21,211.32 Save 8%
View
Out of Stock
C$991.99Was C$1,081.27 Save 8%
View
11" x 11" HydraMat®, Cross
  • Works with Alcohol, Ethanol, Methanol, and E-85 fuels
  • Works with 2-cycle oil blends as high as 20:1
  • Not for use with diesel fuels
Out of Stock
C$681.99Was C$743.37 Save 8%
View