Trade prices for dealers.

0

Holley parts

In stock
Renew Kit Carburetor Rebuild Kit
  • Step-By-Step Instructions
  • Detailed Tuning Guide
  • Competitively Priced
In Stock, Ships tomorrow
C$83.99Was C$91.55 Save 8%
View
GM 4 Pin Alternator Pigtail
  • Fits GM alternators with a 4 Pin oval connector
  • Weather Pack style seal
  • 8 ft. length
In Stock, Ships tomorrow
C$49.99Was C$54.49 Save 8%
View
Renew Kit Carburetor Rebuild Kit
  • Step-By-Step Instructions
  • Detailed Tuning Guide
  • Competitively Priced
In Stock, Ships tomorrow
C$115.99Was C$126.43 Save 8%
View
Carburetor Fuel Inlet Brass Filter
  • Brass moraine style fuel inlet filter
  • Fits Holley street center hung fuel bowls
  • 2 per package
In Stock, Ships tomorrow
C$45.99Was C$50.13 Save 8%
View
Classic Carburetor for 578 vehicles
  • Vibratory polished for good looks
  • Factory preset electric choke for easy startups
  • Power valve blow-out protection
In Stock, Ships tomorrow
C$921.99Was C$1,004.97 Save 8%
View
GM AOD Kickdown Cable Bracket
  • Effective Mounting Point
  • For AOD Trans. Cable
  • For Throttle Cable
In Stock, Ships tomorrow
C$70.99Was C$77.38 Save 8%
View
Regulator Diaphragm Repair Kit
  • Diaphragm repair kit for 12-803 or 12-804 fuel pressure regulators
  • Includes diaphragm, low and high pressure springs
In Stock, Ships tomorrow
C$21.99Was C$23.97 Save 8%
View
GM LS Swap Oil Pan - Most Front Clearance for 82 vehicles
  • Profile of the sump has been revised to provide extra chassis and steering rack clearance
  • NOTE – Oil pan #302-3 will clear a 4.00-inch stroke crankshaft.
  • Traditional high-quality cast aluminum appearance with clean exterior styling
In Stock, Ships tomorrow
C$853.99Was C$930.85 Save 8%
View
700R4 Kickdown Throttle Bracket
  • Corrects geometry for throttle valve cables
  • Mounting hardware included
  • Zinc plated for corrosion resistance
In Stock, Ships tomorrow
C$70.99Was C$77.38 Save 8%
View
97 GPH RED® Electric Fuel Pump
  • Distinctive “Red” logo
  • Flows 71 GPH at 4 psi
  • Weighs only 2.88 lbs
In Stock, Ships tomorrow
C$366.99Was C$400.02 Save 8%
View
Aluminum Street HP Carburetor for 578 vehicles
  • Screw in air bleeds for precision tuning capabilities
  • Four corner idle for precise idle control
  • Available in 650, 750, 850, and 950 CFM versions
In Stock, Ships tomorrow
C$1,280.99Was C$1,396.28 Save 8%
View
Single-Stage Power Valve
  • Includes Gasket
  • Opening Vacuum 3.5 in. Hg
In Stock, Ships tomorrow
C$29.99Was C$32.69 Save 8%
View
Single-Stage Power Valve
  • Includes Gasket
  • Opening Vacuum 2.5 in. Hg
In Stock, Ships tomorrow
C$31.99Was C$34.87 Save 8%
View
Easy Level™ Fuel Level Sender
  • Quickly reads fuel levels with zero contact
  • Long life sensor and no failing floats
  • Bolt Circle Diameter (BCD) is 2.122"
In Stock, Ships tomorrow
C$205.99Was C$224.53 Save 8%
View
Jet Assortment Kit
  • 2 Each Of Jet Sizes 64-99
  • Contained In Plastic Case
  • Separated and Easy Accessible
In Stock, Ships tomorrow
C$168.99Was C$184.20 Save 8%
View
Single-Stage Power Valve
  • Includes Gasket
  • Standard Flow
  • Quantity of One
In Stock, Ships tomorrow
C$28.99Was C$31.60 Save 8%
View
Renew Kit Carburetor Rebuild Kit
  • Step-By-Step Instructions
  • Detailed Tuning Guide
  • Competitively Priced
In Stock, Ships tomorrow
C$104.99Was C$114.44 Save 8%
View
Single-Stage Power Valve
  • Includes Gasket
  • Opening Vacuum 4.5 in. Hg
In Stock, Ships tomorrow
C$29.99Was C$32.69 Save 8%
View
100 GPH Universal In-line Electric Fuel Pump
  • The 12-170 pump is compatible with Pwm
  • Compatible with Flex Fuel (E85/E90) and all types of gasoline (100% Alcohol fuels may diminish fuel pump life)
  • Kit includes fuel pump, -6 to -8 male AN discharge fitting with check valve, terminal nuts & boots, instructions
In Stock, Ships tomorrow
C$369.99Was C$403.29 Save 8%
View
Classic Carburetor for 578 vehicles
  • Vibratory polished for good looks
  • Universal calibration for easy bolt-on performance
  • Power valve blow-out protection
In Stock, Ships tomorrow
C$938.99Was C$1,023.50 Save 8%
View
Fuel Bowl Gasket
  • Blue Non-Stick
  • 2 Per Package
  • Reusable
In Stock, Ships tomorrow
C$18.99Was C$20.70 Save 8%
View
Performance 2BBL Carburetor for 1123 vehicles
  • Vibratory polished for good looks
  • 50cc accelerator pump for additional fuel under initial acceleration
  • Power valve blow-out protection
In Stock, Ships tomorrow
C$938.99Was C$1,023.50 Save 8%
View
80 GPH Mechanical Fuel Pump
  • Street Performance
  • Flows 80 GPH free flow
  • Shutoff pressure pre-set 7.5 PSI
In Stock, Ships tomorrow
C$264.99Was C$288.84 Save 8%
View
Street Avenger Carburetor for 578 vehicles
  • Vibratory polished for good looks
  • Optimized street calibration that works-out-of-the-box
  • Factory preset electric choke for easy startups
In Stock, Ships tomorrow
C$1,195.99Was C$1,303.63 Save 8%
View
Aluminum Choke Conversion Kit
  • Electric Choke Conversion Kit Shiny Finish w/Internal Vacuum Source (0-1850, 0-3310, 0-6425 or 0-7448)
  • Hardware included
In Stock, Ships tomorrow
C$175.99Was C$191.83 Save 8%
View
Aluminum Street HP Carburetor for 578 vehicles
  • Screw in air bleeds for precision tuning capabilities
  • Four corner idle for precise idle control
  • Available in 650, 750, 850, and 950 CFM versions
In Stock, Ships tomorrow
C$1,200.99Was C$1,309.08 Save 8%
View
Transmission Kickdown Stud
  • Effective Mounting Point
  • For Transmission Kickdown
  • For Carburetor Hookup
In Stock, Ships tomorrow
C$24.99Was C$27.24 Save 8%
View
Metering Block Gasket
  • Fits Holley Model 4160™ and Model 4175™ Secondary Only
  • 2 Per Package
  • 100 Bulk Available
In Stock, Ships tomorrow
C$39.99Was C$43.59 Save 8%
View
Base Gasket
  • 1 9/16" Throttle Bore
  • Fits Holley Model 4150™, Model 4160 and Model 4180™
  • .204" Thick
In Stock, Ships tomorrow
C$77.99Was C$85.01 Save 8%
View
Single-Stage Power Valve
  • Includes Gasket
  • Opening Vacuum 9.5 in. Hg
In Stock, Ships tomorrow
C$34.99Was C$38.14 Save 8%
View
Street Avenger Carburetor for 578 vehicles
  • Vibratory polished for good looks
  • Optimized street calibration that works-out-of-the-box
  • Factory preset electric choke for easy startups
In Stock, Ships tomorrow
C$1,195.99Was C$1,303.63 Save 8%
View
In Stock, Ships tomorrow
C$38.99Was C$42.50 Save 8%
View
Street Warrior Carburetor for 578 vehicles
  • Universal calibration for easy bolt-on performance
  • Single feed fuel inlet for easy installation
  • Power valve blow-out protection
In Stock, Ships tomorrow
C$839.99Was C$915.59 Save 8%
View
Carburetor Throttle Stud
  • Throttle Stud 7/32" diameter
In Stock, Ships tomorrow
C$26.99Was C$29.42 Save 8%
View
Carburetor Diaphragm
  • Genuine Holley Quality Parts
In Stock, Ships tomorrow
C$11.99Was C$13.07 Save 8%
View
Aluminum Double Pumper Carburetor for 578 vehicles
  • Optimized street/strip calibration that works out-of-the-box
  • Electric choke for precise cold start control
  • Mechanical secondaries for awesome tire turning performance
In Stock, Ships tomorrow
C$1,120.99Was C$1,221.88 Save 8%
View
Trick Kit Carburetor Rebuild Kit
  • Step-By-Step Instructions
  • Detailed Tuning Guide
  • Packaging Also Parts Tray
In Stock, Ships tomorrow
C$342.99Was C$373.86 Save 8%
View
2-Piece " " Script Valve Cover for 64 vehicles
  • Base features internally baffled ventilation system
  • Includes low-profile billet oil fill cap
  • Includes all necessary coil mounting and dress-up hardware
In Stock, Ships tomorrow
C$984.99Was C$1,073.64 Save 8%
View
Flexible In Tank Fuel Line
  • 10MM ID
  • 240MM Long
  • Compatible for all fuel types
In Stock, Ships tomorrow
C$19.99Was C$21.79 Save 8%
View
Fuel Pump Check Valve Kit
  • Check valve kit for 12-815-1 fuel pump
  • Includes lower gasket, check valve, spring and inlet screen filter
In Stock, Ships tomorrow
C$122.99Was C$134.06 Save 8%
View
Umbrella Check Valve
  • Genuine Holley Quality Parts
In Stock, Ships tomorrow
C$33.99Was C$37.05 Save 8%
View
Fuel Bowl Screw Gasket
  • Fits All Holley Carburetors
  • Reusable Nylon
  • 10 Pack
In Stock, Ships tomorrow
C$34.99Was C$38.14 Save 8%
View
Carburetor & Throttle Body Cleaner Spray, 18oz Can
  • Optimized for Holley and other high-end carburetors, intake systems and throttle bodies
  • 50-State Compliant - Universal formula effective on grime while safe on sensors and electrical components
  • High-Capacity 18oz Can for more uses and fewer trips to the parts store
Out of Stock
C$16.99Was C$18.52 Save 8%
View
Carburetor Jet Removal Tool
  • Great for Quick Change Jet Fuel Bowls
Out of Stock
C$52.99Was C$57.76 Save 8%
View
Tensioner Assembly
  • Genuine Holley Quality Parts
Out of Stock
C$343.99Was C$374.95 Save 8%
View
Out of Stock
C$39.99Was C$43.59 Save 8%
View
Sticker Bomb Mouse Pad
  • Made from High Quality .125” thick non-slip rubber backing
  • Works with any standard corded or optical mouse
  • Pad measures 7.625” x 9.5”
Out of Stock
C$10.99Was C$11.98 Save 8%
View
Ford Trans. Hardware Kit
  • One Locator Pin
  • Carbs w/30cc Accel. Pump
Out of Stock
C$34.99Was C$38.14 Save 8%
View
Carburetor Throttle Stud
  • Genuine Holley Quality Parts
Out of Stock
C$79.99Was C$87.19 Save 8%
View
Out of Stock
C$34.99Was C$38.14 Save 8%
View
15" x 8" HydraMat®, Cross
  • Works with Alcohol, Ethanol, Methanol, and E-85 fuels
  • Works with 2-Cycle oil blends as high as 20:1
  • Not for use with diesel fuels
Out of Stock
C$560.99Was C$611.48 Save 8%
View
Analog Style Water Temperature Gauge
  • LED dimmable backlit design with red pointers makes them easy to read day or night
  • All gauges are electric style and include sending units depending on gauge type
  • Spin lock ring threads to back of gauge case for simple and secure gauge mounting
Out of Stock
C$466.99Was C$509.02 Save 8%
View
Inlet Needle - Viton
  • Adjustable
  • Viton Inlet Needle
  • Operation Is Simple
Out of Stock
C$50.99Was C$55.58 Save 8%
View
Analog Style Speedometer
  • Slim-style mounting requires very little dash space for installation
  • 240° sweep pointer from 8 to 4 o’clock makes gauges easy to read at a glance
  • Spin lock ring threads to back of gauge case for simple and secure gauge mounting
Out of Stock
C$682.99Was C$744.46 Save 8%
View
Fuel Line
  • Genuine Holley Quality Parts
Out of Stock
C$107.99Was C$117.71 Save 8%
View
Detent Cable Bracket
  • Works With TH-350
  • 700R4 Transmissions
  • 200R4
Out of Stock
C$108.99Was C$118.80 Save 8%
View
Fuel Pump Safety Pressure Switch
  • Safety pressure switch that reads oil pressure
  • Will shut off fuel pump when oil pressure drops below 5 psi
  • Includes detailed instructions
Out of Stock
C$95.99Was C$104.63 Save 8%
View
Replacement Timing Cover
  • Replacement Timing Cover for Mid-Mount Accessory Drive Systems 20-290 and 20-292
Out of Stock
C$938.99Was C$1,023.50 Save 8%
View
Analog Style Speedometer
  • Slim-style mounting requires very little dash space for installation
  • 240° sweep pointer from 8 to 4 o’clock makes gauges easy to read at a glance
  • Spin lock ring threads to back of gauge case for simple and secure gauge mounting
Out of Stock
C$681.99Was C$743.37 Save 8%
View
Crankshaft Seal Installation Tool
  • Use with Damper Installation Tool to Install Front Seal in Timing Cover
  • Installation Tool Works with Holley Mid-Mount Timing Covers & Factory Timing Covers.
Out of Stock
C$51.99Was C$56.67 Save 8%
View
Diecast In-Tank RetroFit Fuel Module w/Return
  • The easiest way to convert your vehicle to an in-tank, EFI fuel system
  • ¼” NPT ports for a wide variety of plumbing options
  • Optional roll over valve available
Out of Stock
C$1,081.99Was C$1,179.37 Save 8%
View
Gauge Pedestal Mounting Bracket
  • Black billet aluminum base with black powder coated metal strap
  • Base has predrilled holes for easy mounting
  • Includes rubber insert for vibration resistance
Out of Stock
C$47.99Was C$52.31 Save 8%
View
G-BODY FUEL SYSTEM KIT for 12 vehicles
  • Prepares your 1978-1988 GM G-Body with a bullet proof fuel system for any EFI conversion
  • Contains a wide variety parts and accessories going up to the engine for a complete fuel system kit
  • Highly detailed installation instructions to guide you, step by step, along the installation process
Out of Stock
C$1,536.99Was C$1,675.32 Save 8%
View
Godzilla Oil Pan Baffle - Race
  • Includes baffle only - use w/ Holley Godzilla Oil Pan from Accessory Drive Kits 20-320, 20-320BK, 20-340, and 20-340BK
  • Hinge Door Baffle Design
  • Can be used with factory windage tray
Out of Stock
C$193.99Was C$211.45 Save 8%
View
Replacement Timing Cover
  • Replacement Timing Cover for Mid-Mount Accessory Drive Systems 20-290BK and 20-292BK
Out of Stock
C$1,024.99Was C$1,117.24 Save 8%
View
14" Round Finned Air Cleaner
  • 14” diameter, die-cast aluminum construction
  • Natural Cast finish w/ 3" premium filter element
  • Includes carburetor gasket and all mounting hardware necessary for installation
Out of Stock
C$360.99Was C$393.48 Save 8%
View
Analog Style Speedometer
  • Slim-style mounting requires very little dash space for installation
  • 240° sweep pointer from 8 to 4 o’clock makes gauges easy to read at a glance
  • Spin lock ring threads to back of gauge case for simple and secure gauge mounting
Out of Stock
C$853.99Was C$930.85 Save 8%
View
Ford 7.3L Godzilla Alternator Bracket Kit
  • Works with or without an air conditioning compressor
  • Works with or without a power steering pump
  • Ideal for use on Godzilla crate engines & engine swaps
Out of Stock
C$188.99Was C$206.00 Save 8%
View
G-BODY RETURNLESS FUEL SYSTEM KIT for 12 vehicles
  • Prepares your 1978-1988 GM G-Body with a bullet proof fuel system for conversion to EFI
  • Pump gas and E85 compatible Fuel Plumbing Kit in a box, ready for whatever engine you throw at it
  • Includes 20ft of 6AN nylon braided hose, enough to go from the tank to the fuel rails
Out of Stock
C$1,365.99Was C$1,488.93 Save 8%
View
Replacement Damper - Non VVT
  • Replacement Damper for Mid-Mount Accessory Drive Systems 20-290, 20-290BK, 20-292, and 20-292BK
  • Overall Height: 5.23-inches
  • Fits non-VVT Engines
Out of Stock
C$597.99Was C$651.81 Save 8%
View
Replacement Damper - VVT
  • Replacement Damper for Mid-Mount Accessory Drive Systems 20-291, 20-291BK, 20-293, and 20-293BK
  • Overall Height: 4.76-inches
  • Fits VVT Engines
Out of Stock
C$682.99Was C$744.46 Save 8%
View
Replacement Plug and Adapter Kit
  • Replacement Fittings and Plugs for Gen III Hemi Mid-Mount Accessory Drive System
Out of Stock
C$72.99Was C$79.56 Save 8%
View
3x2 Air Cleaner Gasket
  • 3x2 Carb / Air Cleaner Gasket
Out of Stock
C$49.99Was C$54.49 Save 8%
View
Analog-Style Tachometer
  • Features programmable internal LED shift lights
  • Available in 0-8,000 RPM or 0-10,000 RPM range versions
  • Slim-style mounting requires very little dash space for installation
Out of Stock
C$532.99Was C$580.96 Save 8%
View
Fox Body Fuel System Kits for 1986-1993 Ford Mustang
  • Prepares your 1986-1993 Ford Fox Body Mustangs with a bullet proof fuel system for any engine application
  • Simplifies your fuel system with direct replacement components while still maintaining an OEM-like appearance
  • Highly detailed installation instructions to guide you, step by step, along the installation process
Out of Stock
C$1,908.99Was C$2,080.80 Save 8%
View
Replacement Damper
  • Holley Replacement Damper
Out of Stock
C$1,280.99Was C$1,396.28 Save 8%
View
8" x 3" HydraMat®, Rectangle
  • HydraMats are also available in other sizes and shapes to fit a variety of stock fuel tanks and/or race fuel cells
Out of Stock
C$385.99Was C$420.73 Save 8%
View
Analog Style Voltage Gauge
  • LED dimmable backlit design with red pointers makes them easy to read day or night
  • All gauges are electric style and include sending units depending on gauge type
  • Spin lock ring threads to back of gauge case for simple and secure gauge mounting
Out of Stock
C$325.99Was C$355.33 Save 8%
View
Diecast In-Tank RetroFit Fuel Module w/Return
  • The easiest way to convert your vehicle to an in-tank, EFI fuel system
  • ¼” NPT ports for a wide variety of plumbing options
  • Optional roll over valve available
Out of Stock
C$1,064.99Was C$1,160.84 Save 8%
View
HP Microswitch Bracket
  • Genuine Holley Quality Parts
Out of Stock
C$47.99Was C$52.31 Save 8%
View
Replacement Hardware Kit
  • Genuine Holley Quality Parts
  • Replacement Hardware for SBF 302 Hi-Ram Manifolds
Out of Stock
C$139.99Was C$152.59 Save 8%
View
U-joint - Steel - Black Zinc
  • Universal steering U-joints
  • Includes set screws and lock nuts
  • Ideal for building custom steering shafts
Out of Stock
C$117.99Was C$128.61 Save 8%
View
Flat Base Air Cleaner 10" Black
  • Traditional Look open element style
  • Black reusable gauze filter element
  • Holley logo stamped into the top
Out of Stock
C$114.99Was C$125.34 Save 8%
View
Gauge Pedestal Mounting Bracket
  • Black billet aluminum base with black powder coated metal strap
  • Base has predrilled holes for easy mounting
  • Includes rubber insert for vibration resistance
Out of Stock
C$51.99Was C$56.67 Save 8%
View
Oil Dipstick - Ford 7.3L Godzilla Engine
  • Tucked in tighter than OE dipstick for cleaner look
  • Can be used with other oil pans (but not recommended) - be sure to measure and mark to ensure correct oil level
  • Will not interfere with low hood clearance like the stock dipstick and tube.
Out of Stock
C$86.99Was C$94.82 Save 8%
View
SD7 A/C Compressor
  • High Quality
  • Made by Sanden
  • Long Lasting
Out of Stock
C$1,135.99Was C$1,238.23 Save 8%
View
Regulator Rebuild Kit
  • Fuel Pressure regulator rebuild kit for Holley 12-840 regulator
  • Includes diaphragm and spring
Out of Stock
C$83.99Was C$91.55 Save 8%
View
Renew Kit Carburetor Rebuild Kit
  • Step-By-Step Instructions
  • Detailed Tuning Guide
  • Competitively Priced
Out of Stock
C$80.99Was C$88.28 Save 8%
View
Analog-Style Tachometer
  • Features programmable internal LED shift lights
  • Available in 0-8,000 RPM or 0-10,000 RPM range versions
  • Slim-style mounting requires very little dash space for installation
Out of Stock
C$597.99Was C$651.81 Save 8%
View
Fuel Pressure Gauge
  • 1.5 in. Diameter
  • Chromed Steel Case
  • 0.125 in. NPT Brass Fitting
Out of Stock
C$99.99Was C$108.99 Save 8%
View