Trade prices for dealers.

0

Gates parts

In stock
2.3L Racing Performance Timing Belt for 1992-1993 Ford Mustang
  • Specially-formulated HNBR rubber compound provides up to 3X the heat resistance
  • Gripping teeth reinforced with aramid and nylon cover to minimize wear
  • As much as 300 percent stronger than the standard aftermarket belt
Out of Stock
C$739.00Was C$805.51 Save 8%
View
24.75in Centerline Length Small ID Coolant Hose for BMW
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Caution: Do not use for fuel or oil transfer applications
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Out of Stock
C$53.99Was C$58.85 Save 8%
View
2.4L Coolant Outlet Lower Housing for Honda and Acura
  • Advanced weld process guarantees consistent and durable construction
  • Top quality materials prevent warping and resistance to corrosion
  • Improved seal design provides a leak-free performance
Out of Stock
C$309.00Was C$336.81 Save 8%
View
2.4L DriveAlign Idler Pulley for Kia and Hyundai
  • Mounting hardware included for some popular applications
  • Reliable operation under severe conditions
  • Premium bearings eliminate bearing noise
Out of Stock
C$199.00Was C$216.91 Save 8%
View
2.4L Molded Coolant Hose Upper for 7 vehicles
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$54.99Was C$59.94 Save 8%
View
2.4L N/A Timing Belt Component Kit for Volvo
  • Gates warranty matches the original manufacturer's timing belt replacement intervals ? not just for parts ? but also for…
  • Popular kits covering domestic and import (European and Asian) vehicle applications
  • Designed for convenience, easy parts sourcing and reduced customer comebacks
Out of Stock
C$579.00Was C$631.11 Save 8%
View
2.4L Racing Performance Timing Belt for Volvo
  • Specially-formulated HNBR rubber compound provides up to 3X the heat resistance
  • Gripping teeth reinforced with aramid and nylon cover to minimize wear
  • As much as 300 percent stronger than the standard aftermarket belt
Out of Stock
C$329.00Was C$358.61 Save 8%
View
2.4L Timing Belt Tensioner for Mitsubishi
  • Premium bearings meet or exceed OE standards
  • Engineered w/ OE quality or OE exact fit
  • Hardware provided as needed
Out of Stock
C$120.99Was C$131.88 Save 8%
View
2.4L Water Pump for 10 vehicles
  • Premium water pumps are designed to enhance the performance of the equivalent standard pump
  • Fits and performs exactly to OE specifications and requirements
  • Backed by a limited lifetime warranty
Out of Stock
C$319.00Was C$347.71 Save 8%
View
2500/3500 2500/3500 DriveAlign Automatic Belt Tensioner for Chevrolet and GMC
  • Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
  • Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
  • Torsional round spring design provides reliability as well as consistent tension
Out of Stock
C$127.99Was C$139.51 Save 8%
View
250cc Drive G-Force CVT Belt for Polaris
  • High tensile aramid cord maximizes acceleration, shock load resistance, and extreme fatigue resistance; great for…
  • Improved durability, crack & wear-resistance provides up to 2x the life of the original G-Force Belt
  • Not for use in turbocharged or heavily modified engine applications
Out of Stock
C$219.00Was C$238.71 Save 8%
View
25in. Static Strap
  • Specially compounded rubber conducts static electricity
  • Resists weathering, abrasion and tearing
  • Meets military specifications MILR3065C
Out of Stock
C$40.99Was C$44.68 Save 8%
View
2.5L Micro-V Alt PS Belt for 17 vehicles
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • EPDM rubber constructions resist cracking on the rib surface
  • Tensioner Replacement is Recommended (if equipped)
Out of Stock
C$52.99Was C$57.76 Save 8%
View
2.5L Micro-V Belts for 2010-2012 Subaru Legacy and Outback
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • EPDM rubber constructions resist cracking on the rib surface
  • Tensioner Replacement is Recommended (if equipped)
Out of Stock
C$59.99Was C$65.39 Save 8%
View
2.5L Radiator Cap for 40 vehicles
  • WARNING: Cancer and Reproductive Harm ? www.P65Warnings.ca.gov
  • Wide range of applications covering all makes and models
  • Requires no adjustment for installation
Out of Stock
C$46.99Was C$51.22 Save 8%
View
2.5L Serpentine Micro-V Belt for 8 vehicles
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • EPDM rubber constructions resist cracking on the rib surface
  • Tensioner Replacement is Recommended (if equipped)
Out of Stock
C$58.99Was C$64.30 Save 8%
View
2.5L Standard Water Pump for 2010-2012 Subaru Legacy and Outback
  • Premium water pumps are designed to enhance the performance of the equivalent standard pump
  • Fits and performs exactly to OE specifications and requirements
  • Backed by a limited lifetime warranty
Out of Stock
C$539.00Was C$587.51 Save 8%
View
2.5L V6 2.5L V6 Water Pump for Mitsubishi, Chrysler and Dodge
  • Premium water pumps are designed to enhance the performance of the equivalent standard pump
  • Fits and performs exactly to OE specifications and requirements
  • Backed by a limited lifetime warranty
Out of Stock
C$389.00Was C$424.01 Save 8%
View
2.5L w/ SOHC Racing Performance Timing Belt for Subaru and Saab
  • Specially-formulated HNBR rubber compound provides up to 3X the heat resistance
  • Gripping teeth reinforced with aramid and nylon cover to minimize wear
  • As much as 300 percent stronger than the standard aftermarket belt
Out of Stock
C$1,129.00Was C$1,230.61 Save 8%
View
25mm Wide 5080mm Length Super HC V-Belt
  • Meets RMA oil and heat resistant standards and static conductivity requirements
  • Temperature Range: -22 Deg. F to +140 Deg. F (-30 Deg. C to +60 Deg. C)
  • Up to 300 percent capacity increase over classical belts
Out of Stock
C$799.00Was C$870.91 Save 8%
View
2.6L 2606CC Molded Coolant Hose for 10 vehicles
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$56.99Was C$62.12 Save 8%
View
2.7L V6 Molded Coolant Hose for Dodge and Chrysler
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$61.99Was C$67.57 Save 8%
View
2.7L V6 Molded Coolant Hose for Dodge and Chrysler
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$69.99Was C$76.29 Save 8%
View
2.8L VR6 Micro-V Belt for Volkswagen
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • EPDM rubber constructions resist cracking on the rib surface
  • Tensioner Replacement is Recommended (if equipped)
Out of Stock
C$89.99Was C$98.09 Save 8%
View
2-9/16in Vented Emission Control Hose
  • Constructed from high-quality, heat-resistant materials for a long service life
  • Meets or exceeds all regulatory requirements
  • Direct replacement for an OE-equivalent fit
Out of Stock
C$69.99Was C$76.29 Save 8%
View
292cc Drive G-Force CVT Belt for Yamaha
  • High tensile aramid cord maximizes acceleration, shock load resistance, and extreme fatigue resistance; great for…
  • Improved durability, crack & wear-resistance provides up to 2x the life of the original G-Force Belt
  • Not for use in turbocharged or heavily modified engine applications
Out of Stock
C$187.99Was C$204.91 Save 8%
View
2JZGE/2JZGTE Replacement Timing Belt Component Kit for Lexus and Toyota
  • Gates warranty matches the original manufacturer's timing belt replacement intervals ? not just for parts ? but also for…
  • Popular kits covering domestic and import (European and Asian) vehicle applications
  • Designed for convenience, easy parts sourcing and reduced customer comebacks
Out of Stock
C$259.00Was C$282.31 Save 8%
View
2-Rotor 1.3L Lower Molded Coolant Hose for 2004-2011 Mazda RX-8
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$219.00Was C$238.71 Save 8%
View
2-Rotor 1.3L Micro-V Serpentine Belt for 2004-2008 Mazda RX-8
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • EPDM rubber constructions resist cracking on the rib surface
  • Tensioner Replacement is Recommended (if equipped)
Out of Stock
C$59.99Was C$65.39 Save 8%
View
300C 5.7L V8 Molded Coolant Hose for Dodge and Chrysler
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$44.99Was C$49.04 Save 8%
View
300C 5.7L V8 Molded Coolant Hose for Dodge and Chrysler
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$67.99Was C$74.11 Save 8%
View
300C Small ID Molded Heater Hose for Dodge and Chrysler
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Caution: Do not use for fuel or oil transfer applications
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Out of Stock
C$56.99Was C$62.12 Save 8%
View
!3 07-09 TT DriveAlign Automatic Belt Tensioner for Volkswagen and Audi
  • Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
  • Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
  • Torsional round spring design provides reliability as well as consistent tension
Out of Stock
C$299.00Was C$325.91 Save 8%
View
3.0L Branched Heater Outlet Hose for BMW
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Specifically-engineered materials resist collapse under vacuum
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$84.99Was C$92.64 Save 8%
View
3.0L Branched Lower Radiator Hose for BMW
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Specifically-engineered materials resist collapse under vacuum
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$299.00Was C$325.91 Save 8%
View
3.0L Branched Upper Radiator Hose for BMW
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Specifically-engineered materials resist collapse under vacuum
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$110.99Was C$120.98 Save 8%
View
3.0L Cam. Timing Belt for 27 vehicles
  • High-grade HNBR rubber for superior heat and contamination resistance
  • PTFE-infused jackets to reduce frictional losses and tooth shear
  • Premium tensile members providing maximum strength
Out of Stock
C$147.99Was C$161.31 Save 8%
View
3.0L Lower Molded Coolant Hose for 1993-1998 Toyota Supra
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$75.99Was C$82.83 Save 8%
View