Trade prices for dealers.

0

Gates parts

In stock
Timing Belt Kit w/ Water Pump for Audi and Volkswagen
  • Water pumps are designed and built for long lasting, efficient cooling
  • Everything you need to do the job right, all in one box
  • Hydraulic tensioners included, where needed
Out of Stock
C$969.00Was C$1,056.21 Save 8%
View
Timing Belt Kit w/ Water Pump for Hyundai and Kia
  • Water pumps are designed and built for long lasting, efficient cooling
  • Everything you need to do the job right, all in one box
  • Hydraulic tensioners included, where needed
Out of Stock
C$739.00Was C$805.51 Save 8%
View
Timing Belt Kit w/ Water Pump for Kia and Hyundai
  • Water pumps are designed and built for long lasting, efficient cooling
  • Everything you need to do the job right, all in one box
  • Hydraulic tensioners included, where needed
Out of Stock
C$869.00Was C$947.21 Save 8%
View
Timing Belt Kit w/ Water Pump for Lexus and Toyota
  • Water pumps are designed and built for long lasting, efficient cooling
  • Everything you need to do the job right, all in one box
  • Hydraulic tensioners included, where needed
Out of Stock
C$1,159.00Was C$1,263.31 Save 8%
View
Timing Belt Kit w/ Water Pump for Subaru
  • Water pumps are designed and built for long lasting, efficient cooling
  • Everything you need to do the job right, all in one box
  • Hydraulic tensioners included, where needed
Out of Stock
C$1,979.00Was C$2,157.11 Save 8%
View
Timing Belt Kit w/ Water Pump for Toyota
  • Water pumps are designed and built for long lasting, efficient cooling
  • Everything you need to do the job right, all in one box
  • Hydraulic tensioners included, where needed
Out of Stock
C$1,229.00Was C$1,339.61 Save 8%
View
Timing Belt Kit w/ Water Pump for Volkswagen
  • Water pumps are designed and built for long lasting, efficient cooling
  • Everything you need to do the job right, all in one box
  • Hydraulic tensioners included, where needed
Out of Stock
C$1,509.00Was C$1,644.81 Save 8%
View
Timing Belt Tensioner for 18 vehicles
  • Premium bearings meet or exceed OE standards
  • Engineered w/ OE quality or OE exact fit
  • Hardware provided as needed
Out of Stock
C$219.00Was C$238.71 Save 8%
View
Timing Belt Tensioner for Mitsubishi, Eagle and Plymouth
  • Engineered w/ high strength, low weight & quiet operation for efficient system operation
  • Metal components resist contamination w/ composite sealant
  • Premium bearings meet or exceed OE standards
Out of Stock
C$369.00Was C$402.21 Save 8%
View
Timing Belt Tensioner for Toyota
  • Engineered w/ high strength, low weight & quiet operation for efficient system operation
  • Metal components resist contamination w/ composite sealant
  • Premium bearings meet or exceed OE standards
Out of Stock
C$299.00Was C$325.91 Save 8%
View
Timing Belt Tensioners for 1990-1999 Subaru Impreza and Legacy
  • Engineered w/ high strength, low weight & quiet operation for efficient system operation
  • Metal components resist contamination w/ composite sealant
  • Premium bearings meet or exceed OE standards
Out of Stock
C$379.00Was C$413.11 Save 8%
View
Timing Component Kit for 1992-1995 Honda Civic
  • Gates warranty matches the original manufacturer's timing belt replacement intervals ? not just for parts ? but also for…
  • Popular kits covering domestic and import (European and Asian) vehicle applications
  • Designed for convenience, easy parts sourcing and reduced customer comebacks
Out of Stock
C$329.00Was C$358.61 Save 8%
View
Timing Component Kit for 1993-2001 Honda Prelude
  • Gates warranty matches the original manufacturer's timing belt replacement intervals ? not just for parts ? but also for…
  • Popular kits covering domestic and import (European and Asian) vehicle applications
  • Designed for convenience, easy parts sourcing and reduced customer comebacks
Out of Stock
C$839.00Was C$914.51 Save 8%
View
Timing Component Kit for Mitsubishi
  • Gates warranty matches the original manufacturer's timing belt replacement intervals ? not just for parts ? but also for…
  • Popular kits covering domestic and import (European and Asian) vehicle applications
  • Designed for convenience, easy parts sourcing and reduced customer comebacks
Out of Stock
C$689.00Was C$751.01 Save 8%
View
Timing Component Kit for Mitsubishi, Chrysler and Dodge
  • Gates warranty matches the original manufacturer's timing belt replacement intervals ? not just for parts ? but also for…
  • Popular kits covering domestic and import (European and Asian) vehicle applications
  • Designed for convenience, easy parts sourcing and reduced customer comebacks
Out of Stock
C$729.00Was C$794.61 Save 8%
View
TJ Micro-V Belt for 23 vehicles
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • EPDM rubber constructions resist cracking on the rib surface
  • Tensioner Replacement is Recommended (if equipped)
Out of Stock
C$69.99Was C$76.29 Save 8%
View
TJ/ Small ID Coolant Hose for Jeep and Saturn
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Caution: Do not use for fuel or oil transfer applications
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Out of Stock
C$68.99Was C$75.20 Save 8%
View
TL 12 Micro-V Belt for Honda, Acura and Mercedes-Benz
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • EPDM rubber constructions resist cracking on the rib surface
  • Tensioner Replacement is Recommended (if equipped)
Out of Stock
C$93.99Was C$102.45 Save 8%
View
TL Micro-V Belt for Acura, Honda and Toyota
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • EPDM rubber constructions resist cracking on the rib surface
  • Tensioner Replacement is Recommended (if equipped)
Out of Stock
C$53.99Was C$58.85 Save 8%
View
TL Timing Belt Component Kit for Acura and Honda
  • Gates warranty matches the original manufacturer's timing belt replacement intervals ? not just for parts ? but also for…
  • Popular kits covering domestic and import (European and Asian) vehicle applications
  • Designed for convenience, easy parts sourcing and reduced customer comebacks
Out of Stock
C$409.00Was C$445.81 Save 8%
View
TL/ Timing Belt for Acura, Honda and Saturn
  • High-grade HNBR rubber for superior heat and contamination resistance
  • PTFE-infused jackets to reduce frictional losses and tooth shear
  • Premium tensile members providing maximum strength
Out of Stock
C$91.99Was C$100.27 Save 8%
View
TL Timing Belt Kit w/ Water Pump for Acura and Honda
  • Water pumps are designed and built for long lasting, efficient cooling
  • Everything you need to do the job right, all in one box
  • Hydraulic tensioners included, where needed
Out of Stock
C$1,159.00Was C$1,263.31 Save 8%
View
Touring 550 EPS 549cc Drive G-Force CVT Belt for Polaris
  • High tensile aramid cord maximizes acceleration, shock load resistance, and extreme fatigue resistance; great for…
  • Improved durability, crack & wear-resistance provides up to 2x the life of the original G-Force Belt
  • Not for use in turbocharged or heavily modified engine applications
Out of Stock
C$269.00Was C$293.21 Save 8%
View
Touring 850 EPS 850cc G Force CVT Belt for Polaris
  • Optimized, patented Ethylene Elastomeric (EE) compound maximizes axial stiffness enabling belts to run at higher…
  • Tested under extreme conditions in controlled environments as well as on race vehicles
  • Greater heat resistance and recovery, even under severe duty cycles
Out of Stock
C$299.00Was C$325.91 Save 8%
View
Touring 850 EPS 850cc G-Force CVT Drive Belt for Polaris
  • Advanced aramid tensile cords and reinforced fiber-loaded undercord for durability and dependability
  • Flexible, high-performance materials enable grab-and-go mobility and responsive acceleration
  • Tested under extreme conditions in controlled environments as well as on race vehicles
Out of Stock
C$239.00Was C$260.51 Save 8%
View
Transit V-6 3.5L A.C. P.S. Accessory Belt Drive Kit (Heavy Duty) for Ford
  • FleetRunner belts are engineered to handle high mileage, high idle times and high temperatures in abusive environments
  • Complete system service extends preventive maintenance schedules
  • Engineered to save your fleet money and reduce downtime
Out of Stock
C$120.99Was C$131.88 Save 8%
View
Transit V-6 3.7L A.C. P.S. Accessory Belt Drive Kit (Heavy Duty) for Ford
  • FleetRunner belts are engineered to handle high mileage, high idle times and high temperatures in abusive environments
  • Complete system service extends preventive maintenance schedules
  • Engineered to save your fleet money and reduce downtime
Out of Stock
C$185.99Was C$202.73 Save 8%
View
Transit V-6 3.7L Lower Molded Coolant Hose for Ford
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Specifically-engineered materials resist collapse under vacuum
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$209.00Was C$227.81 Save 8%
View
Transit V6 3.7L Serpentine Belt Kit for Ford and Mobility Ventures
  • NOTE: Kit contents vary depending on specific needs of vehicle kit application
  • Designed for convenience, easy parts sourcing and reduced customer comebacks
  • Meets or exceeds OE standards in form, function and fit
Out of Stock
C$279.00Was C$304.11 Save 8%
View
Transit V-6 3.7L Upper Molded Coolant Hose for Ford
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$55.99Was C$61.03 Save 8%
View
Tri-Power V Belt Outside Circumference 115in Top Width 0.66in
  • Meets RMA oil and heat resistant standards and static conductivity requirements
  • Cross-oriented, fiber-loaded rubber compound for flexibility and stability
  • Temperature Range: -58 Deg. F to +248 Deg. F (-50 Deg. C to +120 Deg. C)
Out of Stock
C$113.99Was C$124.25 Save 8%
View
Truflex Belts
  • Do not use on applications where FHP medium horsepower V-belts are recommended
  • Available in 2L (0), 3L (1), 4L (2) and 5L (3) cross-sections
  • Runs with smooth, quiet operation
Out of Stock
C$36.99Was C$40.32 Save 8%
View
Universal 3in x 21 19/32in Molded Coolant Hose
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$191.99Was C$209.27 Save 8%
View
Universal 58in Outside Circumference .66in Width Hi-Power II Belt
  • High-quality rubber compound protects the belt against heat, ozone and sunlight
  • Meets RMA oil and heat resistant standards and static conductivity requirements
  • Temperature Range: -22 Deg. F to +140 Deg. F (-30 Deg. C to +60 Deg. C)
Out of Stock
C$54.99Was C$59.94 Save 8%
View
Universal 66in Outside Circumference 0.66in Width Hi-Power II Belt
  • High-quality rubber compound protects the belt against heat, ozone and sunlight
  • Meets RMA oil and heat resistant standards and static conductivity requirements
  • Temperature Range: -22 Deg. F to +140 Deg. F (-30 Deg. C to +60 Deg. C)
Out of Stock
C$53.99Was C$58.85 Save 8%
View
Universal 73in Outside Circumference 0.66in Width Hi-Power II Belt
  • High-quality rubber compound protects the belt against heat, ozone and sunlight
  • Meets RMA oil and heat resistant standards and static conductivity requirements
  • Temperature Range: -22 Deg. F to +140 Deg. F (-30 Deg. C to +60 Deg. C)
Out of Stock
C$50.99Was C$55.58 Save 8%
View
Universal Micro-V Serpentine Belt for 34 vehicles
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • EPDM rubber constructions resist cracking on the rib surface
  • Tensioner Replacement is Recommended (if equipped)
Out of Stock
C$72.99Was C$79.56 Save 8%
View
Upper Molded Coolant Hose for 103 vehicles
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$44.99Was C$49.04 Save 8%
View
Upper Molded Coolant Hose for Cadillac
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$110.99Was C$120.98 Save 8%
View
Upper Molded Radiator Hose for 1984 Chevrolet Corvette
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$84.99Was C$92.64 Save 8%
View
Upper Radiator Hose for 9 vehicles
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$57.99Was C$63.21 Save 8%
View
Upper Radiator Molded Coolant Hose for BMW
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Specifically-engineered materials resist collapse under vacuum
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$93.99Was C$102.45 Save 8%
View
V-10 8L Heavy Duty Thermostat-180 Deg. Weir-Stat w/O-Ring Perimeter Seal for 1992-2010 Dodge Viper
  • Jiggle pins for air venting, seals and gaskets make these thermostats equivalent to the original equipment parts
  • Quality-controlled factory calibration assures accuracy of opening and closing, regardless of pressure changes
  • Heavy-gauge brass and stainless steel construction for corrosion resistance
Out of Stock
C$299.00Was C$325.91 Save 8%
View
V-6 171 Upper Molded Coolant Hose for 4 vehicles
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$58.99Was C$64.30 Save 8%
View
V-6 171 Upper Molded Coolant Hose for Ford and Mercury
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$39.99Was C$43.59 Save 8%
View
V-6 2.5L Accessory Belt Drive Kit (Standard) for Lexus
  • NOTE: Kit contents vary depending on specific needs of vehicle kit application
  • Designed for convenience, easy parts sourcing and reduced customer comebacks
  • Meets or exceeds OE standards in form, function and fit
Out of Stock
C$1,059.00Was C$1,154.31 Save 8%
View
V6 2.5L Alternator Belt for 5 vehicles
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • EPDM rubber constructions resist cracking on the rib surface
  • Tensioner Replacement is Recommended (if equipped)
Out of Stock
C$52.99Was C$57.76 Save 8%
View
V-6 2.5L Lower Molded Coolant Hose for 1994-1997 Saab 900
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$199.00Was C$216.91 Save 8%
View
V-6 2.5L Lower Molded Coolant Hose for Chrysler and Dodge
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$85.99Was C$93.73 Save 8%
View
V-6 2.5L Lower Molded Coolant Hose for Mercedes-Benz
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Specifically-engineered materials resist collapse under vacuum
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$249.00Was C$271.41 Save 8%
View
V-6 2.5L P.S. Belt Drive Pulley for Mazda and Ford
  • Mounting hardware included for some popular applications
  • Reliable operation under severe conditions
  • Premium bearings eliminate bearing noise
Out of Stock
C$279.00Was C$304.11 Save 8%
View
V-6 2.5L Serpentine Belt Drive Tensioner for Mercury and Ford
  • Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
  • Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
  • Torsional round spring design provides reliability as well as consistent tension
Out of Stock
C$219.00Was C$238.71 Save 8%
View
V6 2.5L Serpentine Belt Kit for 1995-1997 Saab 900
  • NOTE: Kit contents vary depending on specific needs of vehicle kit application
  • Designed for convenience, easy parts sourcing and reduced customer comebacks
  • Meets or exceeds OE standards in form, function and fit
Out of Stock
C$419.00Was C$456.71 Save 8%
View
V6 2.5L Serpentine Belt Kit for 2006-2016 Lexus IS250 and IS350
  • NOTE: Kit contents vary depending on specific needs of vehicle kit application
  • Designed for convenience, easy parts sourcing and reduced customer comebacks
  • Meets or exceeds OE standards in form, function and fit
Out of Stock
C$1,269.00Was C$1,383.21 Save 8%
View
V-6 2.5L Serpentine Standard V-Ribbed Belt for Mercury and Ford
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • EPDM rubber constructions resist cracking on the rib surface
  • Tensioner Replacement is Recommended (if equipped)
Out of Stock
C$86.99Was C$94.82 Save 8%
View
V6-2.5L Timing Belt Auto Tensioner for Mazda and Ford
  • Engineered w/ high strength, low weight & quiet operation for efficient system operation
  • Metal components resist contamination w/ composite sealant
  • Premium bearings meet or exceed OE standards
Out of Stock
C$359.00Was C$391.31 Save 8%
View
V-6 2.5L Timing Belt Component Kit for 1988-1991 Lexus ES250 and Toyota Camry
  • Gates warranty matches the original manufacturer's timing belt replacement intervals ? not just for parts ? but also for…
  • Popular kits covering domestic and import (European and Asian) vehicle applications
  • Designed for convenience, easy parts sourcing and reduced customer comebacks
Out of Stock
C$619.00Was C$674.71 Save 8%
View
V-6 2.5L Upper Molded Coolant Hose for 10 vehicles
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$41.99Was C$45.77 Save 8%
View
V-6 2.5L Upper Molded Coolant Hose for 1994-1997 Saab 900
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$77.99Was C$85.01 Save 8%
View
V-6 2.5L Upper Molded Coolant Hose for 1998-2002 Mazda 626
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$58.99Was C$64.30 Save 8%
View
V-6 2.5L Upper Molded Coolant Hose for 2000-2001 Mazda MPV
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$109.99Was C$119.89 Save 8%
View
V-6 2.5L Upper Molded Coolant Hose for 5 vehicles
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$126.99Was C$138.42 Save 8%
View
V-6 2.5L Upper Molded Coolant Hose for Mazda, Lexus and Ford
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$56.99Was C$62.12 Save 8%
View
V-6 2.5L Upper Molded Coolant Hose for Mercedes-Benz
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Specifically-engineered materials resist collapse under vacuum
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$309.00Was C$336.81 Save 8%
View
V-6 2.5L Upper Molded Coolant Hose for Mercury and Ford
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Specifically-engineered materials resist collapse under vacuum
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$239.00Was C$260.51 Save 8%
View
V-6 2.7L Alt. Standard V-Ribbed Belt for Sterling and Acura
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • EPDM rubber constructions resist cracking on the rib surface
  • Tensioner Replacement is Recommended (if equipped)
Out of Stock
C$46.99Was C$51.22 Save 8%
View
V-6 2.7L Heater To Pipe-1 Molded Heater Hose for 4 vehicles
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Caution: Do not use for fuel or oil transfer applications
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Out of Stock
C$54.99Was C$59.94 Save 8%
View
V-6 2.7L Heater To Tee Molded Heater Hose for 18 vehicles
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Caution: Do not use for fuel or oil transfer applications
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Out of Stock
C$60.99Was C$66.48 Save 8%
View
V-6 2.7L Lower Molded Coolant Hose for 1995-1997 Honda Accord
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$86.99Was C$94.82 Save 8%
View
V-6 2.7L P.S. Standard V-Ribbed Belt for 6 vehicles
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • EPDM rubber constructions resist cracking on the rib surface
  • Tensioner Replacement is Recommended (if equipped)
Out of Stock
C$50.99Was C$55.58 Save 8%
View
V-6 2.7L P.S. Stretch Fit V-Ribbed Belt for 2007-2010 Chrysler Sebring and Dodge Avenger
  • Gates engineered tensile cord has the needed combination of strength and flexibility using advanced polyamide tensile…
  • Patented highly engineered EPDM belt ribs are extremely resistant to contamination, wear and pilling
  • NOTE: Stretch Fit belts are single-use only and must be replaced if removed
Out of Stock
C$43.99Was C$47.95 Save 8%
View
V6 2.7L Serpentine Belt Kit for Hyundai
  • NOTE: Kit contents vary depending on specific needs of vehicle kit application
  • Designed for convenience, easy parts sourcing and reduced customer comebacks
  • Meets or exceeds OE standards in form, function and fit
Out of Stock
C$359.00Was C$391.31 Save 8%
View
V-6 2.7L Serpentine Master Kit for Audi
  • See Gates On-line Application Catalog for specific vehicle solutions
  • Designed to solve OEM design issues or problematic drives
  • Broad vehicle coverage
Out of Stock
C$1,589.00Was C$1,732.01 Save 8%
View
V-6 2.7L Tensioner Assy. Belt Drive Tensioner for Kia and Hyundai
  • Comprehensive line includes parts to fit cars, vans, SUVs and light trucks, domestic and import (European and Asian)
  • Patented labyrinth seal protects internal components to meet or exceed OE life expectancy requirements
  • Torsional round spring design provides reliability as well as consistent tension
Out of Stock
C$609.00Was C$663.81 Save 8%
View
V-6 2.7L Upper Molded Coolant Hose for 1995-1997 Honda Accord
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$81.99Was C$89.37 Save 8%
View
V-6 2.7L Upper Molded Coolant Hose for Dodge and Chrysler
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Specifically-engineered materials resist collapse under vacuum
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$141.99Was C$154.77 Save 8%
View
V-6 2.7L Upper Molded Coolant Hose for Hyundai and Kia
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$87.99Was C$95.91 Save 8%
View
V-6 2.8L Heater To Eng. Molded Heater Hose for 8 vehicles
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Caution: Do not use for fuel or oil transfer applications
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Out of Stock
C$57.99Was C$63.21 Save 8%
View
V-6 2.8L Lower Molded Coolant Hose for 2002-2005 Volkswagen Passat
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Specifically-engineered materials resist collapse under vacuum
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$339.00Was C$369.51 Save 8%
View
V-6 2.8L Lower Molded Coolant Hose for 8 vehicles
  • Specifically-engineered materials resist collapse under vacuum
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$86.99Was C$94.82 Save 8%
View
V-6 2.8L Lower Molded Coolant Hose for Audi and Volkswagen
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Specifically-engineered materials resist collapse under vacuum
  • Caution: Do not use for fuel or oil transfer applications
Out of Stock
C$369.00Was C$402.21 Save 8%
View
V6 2.8L Serpentine Belt Kit for Audi and Volkswagen
  • NOTE: Kit contents vary depending on specific needs of vehicle kit application
  • Designed for convenience, easy parts sourcing and reduced customer comebacks
  • Meets or exceeds OE standards in form, function and fit
Out of Stock
C$329.00Was C$358.61 Save 8%
View
V-6 2.8L Serpentine Master Kit for Audi and Volkswagen
  • See Gates On-line Application Catalog for specific vehicle solutions
  • Designed to solve OEM design issues or problematic drives
  • Broad vehicle coverage
Out of Stock
C$1,359.00Was C$1,481.31 Save 8%
View