Trade prices for dealers.

0

Gates parts

In stock
V-8 4.4L Turbo Oil Feed Line Turbocharger Oil Line for BMW
  • Designed to fit like the original part for easy routing in tight engine compartments
  • Mounting gaskets, seals and hardware are included where applicable
  • OE-Exact fit for direct replacement
Out of Stock
C$339.00Was C$369.51 Save 8%
View
V-8 4.5L Heater To Tee-2 Molded Heater Hose for Cadillac
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Caution: Do not use for fuel or oil transfer applications
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Out of Stock
C$46.99Was C$51.22 Save 8%
View
V-8 4.6L Heater To Pipe-1 Molded Heater Hose for 10 vehicles
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Caution: Do not use for fuel or oil transfer applications
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Out of Stock
C$77.99Was C$85.01 Save 8%
View
V-8 4.6L Heater To Pipe-1 Molded Heater Hose for 19 vehicles
  • EPDM tube, synthetic fiber knit reinforcement, EPDM cover
  • Caution: Do not use for fuel or oil transfer applications
  • Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Out of Stock
C$55.99Was C$61.03 Save 8%
View
V-8 4.6L Serpentine Micro-V Belt for 48 vehicles
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • EPDM rubber constructions resist cracking on the rib surface
  • Tensioner Replacement is Recommended (if equipped)
Out of Stock
C$107.99Was C$117.71 Save 8%
View
V-8 4.6L Water Pump Standard V-Ribbed Belt for 11 vehicles
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • EPDM rubber constructions resist cracking on the rib surface
  • Tensioner Replacement is Recommended (if equipped)
Out of Stock
C$47.99Was C$52.31 Save 8%
View
V-8 472 P.S. A.C. High Capacity V-Belt (Standard) for 65 vehicles
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
Out of Stock
C$57.99Was C$63.21 Save 8%
View
V8 4.7L Serpentine Belt Kit for 2008-2009 Mercedes-Benz GL450
  • NOTE: Kit contents vary depending on specific needs of vehicle kit application
  • Designed for convenience, easy parts sourcing and reduced customer comebacks
  • Meets or exceeds OE standards in form, function and fit
Out of Stock
C$399.00Was C$434.91 Save 8%
View
V-8 4.7L Serpentine Standard V-Ribbed Belt for 17 vehicles
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • EPDM rubber constructions resist cracking on the rib surface
  • Tensioner Replacement is Recommended (if equipped)
Out of Stock
C$79.99Was C$87.19 Save 8%
View
V-8 4.8L A.C. Stretch Fit V-Ribbed Belt for BMW
  • Gates engineered tensile cord has the needed combination of strength and flexibility using advanced polyamide tensile…
  • Patented highly engineered EPDM belt ribs are extremely resistant to contamination, wear and pilling
  • NOTE: Stretch Fit belts are single-use only and must be replaced if removed
Out of Stock
C$48.99Was C$53.40 Save 8%
View
V-8 4.8L Alt. W.P. P.S. Belt Drive Pulley for BMW
  • Mounting hardware included for some popular applications
  • Reliable operation under severe conditions
  • Premium bearings eliminate bearing noise
Out of Stock
C$190.99Was C$208.18 Save 8%
View